1 of 20
|Class||Canal and River Cruiser|
|Hull Warranty||5 years|
The Viking 215 is a perfect craft for those seeking a first family river craft and for experienced boaters looking at a craft that can be easily road transported.
The main feature of the Viking 215 is the easy boarding via the stainless steel and teak bathing platforms and transom door to the starboard side giving access to the spacious cockpit which features a full standing headroom height canopy.
This Viking 215 is to be fitted with a 20 hp ELPT efi Mariner outboard Motor & Delivery Pack.
The interior of the Viking 215 offers accommodation for four easily with a minimum headroom of 5'10''. The cabin is laid out with a V bed forward with an infill to make this into a good sized double berth. To port aft of this the dinette is located with forward and aft facing seats which feature extendable sections to make this a double berth or to seat four around the table. Opposite and to starboard is the galley with storage beneath the worktops. The sink and hob is a combined unit with a flush fitting fold down glass cover. Aft of the galley the toilet room has a cassette flush toilet, shower and foldaway sink.
The cockpit features the helm to starboard with steering via a cable to the outboard, single lever engine controls and ancillary switches. A single pedestal helm seat is to port with further seating aft in an "L" shape design. Access to the port deck is via a step following removal of the base cushion and to starboard by a step beneath which the gas locker is located. The feature of this small and versatile craft is its transom access via the bathing platform giving easy unobstructed access from shore side to the boat.
The Viking 215 is fully hand moulded featuring a gel coat exterior strengthened by chopped strand matt. All exterior fittings are in stainless steel and the boat has side decks of approximately 6" in width, sturdy handrails are located on the cabin top and the bow is surrounded by a stainless steel pulpit
The Hi Line specification of a Viking includes; Oven and grill, hot and cold water, shower and fold down sink,cassette flush toilet and antifouling. It is to purchasers choice to order a Hi Line or the standard craft which retails at £4000 less without these features. All craft built by Viking Mouldings can be fitted with further options customising each boat to individual tastes including such items as cabin heating, bow thruster, sea toilet, radio CD player. A full list is available upon request.
All Viking models are outboard powered. As standard prices are quoted with Mariner outboard models, we can offer prices for any outboard to purchasers choice and size depending on individual preferences and planned location of cruising.
Stainless steel pulpit rail
Stainless steel hand rails to cabin top
Stainless steel hand rails below side screens
Six fender eyes
Aluminium rubbing strake with plastic insert
Four piece Powder coated windscreen (folding is an option)
Powder coated cabin side windows with opening section to port
Pespex forward opening escape hatch
Cabin ventilation fixed
Hull side decals
PVC canopy on aluminiumn frame
Fibreglass moulded bathing platform with engine mount location
Cockpit seating with base and back cushions in vinyl covering
Steering system and wheel
Two 80 ah batteries
Rotary type battery master switch
20 HP Mariner Outboard engine
Mariner Engine control system
12.5 litre Mariner fuel tank
12 v switch panel
Interior cabin LED lighting
Flexible water bag in bow
Galley sink with hot and cold mixer tap
2 burner gas hob
Gas test point
Boat safety certificate
Porta Potti flush toilet
Interior joinery in Oak veneer ply panelling
Interior upholstery from selected samples
Cream coloured curtains
Beige coloured interior hull lining carpet
Heavy duty floor carpet in Blue, Black or Grey
Canopy in PVC ( Blue, Black, Maroon, Grey or White)
Gas hot water boiler
Hot water to galley and shower
Shower to toilet room
2 burner gas hob
Gas test point
12 volt fridge
Cartridge toilet with fresh water electric flush toilet
1 x wiper
1 x 12v socket
Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate to have the vessel fully surveyed and inspected, sea trialled and opened up.
|Engine Model||20hp ELPT|
|Propeller Type||3 Blade|
|Max Bridge Clearance||6.56ft|
|Fresh Water Tank||1 x 26.42 gal (Plastic)|
|Fuel Tank||1 x 3.3 gal (Plastic)|