2023 Seawind 116038ft

• Overall Length                               38'
• Beam                                             21' 4"
• Draft                                               3' 6"
• Displacement                                 14,300lbs
• Power Tilt Outboards                     2 x 20 hp Honda
• Diesel Inboard (Optional)              2 x 29 hp Yanmar
• Fresh Water                                   185 US gallons
• Fuel                                                71 US gallons
• Steering Twin Helms                     Cable Steering
• Underwing Clearance                    2' 4"
• Mainsail                                         635 sq ft
• Jib                                                  226 sq ft
• Screecher (optional)                      667 sq ft
• Spinnaker (optional)                      1,023 sq ft

• Finish: Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas.
• Hull Laminate: New Infused Vinyl Ester (Modified epoxy) resin laminate of the entire hull laminate
• Hull Core Material: New PVC closed cell foam core
• Deck Laminate: New Vacuum formed polyester resin laminate
• Deck Core Material: PVC closed cell foam core

• Twin lightweight Honda 20hp 20” engines. Mounted under each helm seat at each steering station
• 5” leg extensions added to engines to reduce cavitation
• Remote electric key start with electric tilt fitted
• Dual engine controls at port helm station
• 71 Gal fuel tank mounted in external locker forward of the mast

Saloon

• Polished wood dining table: Lowers to create coffee table or double bed.
• Upholstered settee.
• Cocktail cabinet with polished hinging lid.
• Forward windows in 10mm toughened glass and inset with opening 20" x 15"  aluminium opening hatch. Side windows in 6mm toughened glass.
• Durable synthetic wood flooring.
• Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway.

Sleeping Cabins

• Foam cored wood doors on all private cabins.
• Port & Starboard fwd cabins : Each queen sized bed (80" x 60")
• Aft Starboard cabin : Double bed (78" x 48")
• Mattresses are 6" foam upholstered.
• Cabins lined.
• Recessed 12V lighting.
• Storage/Cupboards.

Port Head

• Foam cored wood lockable door
• PAR manual toilet. Discharge via holding tank
• Holding tanks built in. Discharge pump out by shore station or directly overboard. Port 34 Gal and Stb 29 Gal.
• Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements
• Vanity basin with pressure cold water (hot water is an option).
• Separate shower stall with clear glass door. Wall mounted shower head and mixer tap
• Electric shower bilge pump with direct overboard discharge
• Large quantity cupboards/shelves to very high quality

• Spacious galley with co-ordinated Polystone counter surfaces
• Three (3) burner LPG stove, stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out
• Double bowl stainless steel sink
• Pressure fresh water system
• Refrigerator: Front opening upright fridge with freezing compartment 80 litres
• Under bench storage
• Trash bin
• LPG solenoid control in galley

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors
• Batteries x 3 comprising: House System (260 amp hrs) : 2 x 130 amp hr heavy duty batteries. One engine cranking battery – 130 amp hr heavy duty battery
• 230amp heavy duty isolation switch
• 12V lighting : Numerous 12V interior lamps and courtesy lights throughout including recessed lights in cockpit
• 4 x 12V Outlets
• CE approved navigation lights. Port & Starboard mounted on bow rails
• Deck floodlight mounted on spreaders
• Mast head anchor / riding light.

• Twin steering compasses

• Clear anodized aluminum mast and boom. Single Spreader, 7/8 rig
• Standing Rigging :

– Forestay 3/8” (10mm) 1 x 19 Dieform wire.
– Sidestays 3/8” (10mm) 1 x 19 Dieform wire
– Diamonds 5/16” (8mm) 1 x 19 Stainless Steel wire

• Halyards:

– Main halyard: 12 mm Spectra rope : Heavy duty shackle
– Jib halyard: 8 mm Spectra rope. Heavy duty shackle
– Topping lift: 8 mm rope, Heavy duty shackle
– Boom outhaul: 10mm Spectra

• Single line reefing, run to helm. Three reefing points with 2 reef lines

– Reef 1 & 3: 10mm rope. Leech/Clew blocks and snap shackle
– Reef 2: 10mm rope. Heavy duty shackle

• Sheets:

– Main sheet: 10mm rope
– Main traveller: 8mm rope
– Jib sheet: 10mm rope

• All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches
• Fully battened mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fibreglass sail battens
• Mainsail cover with integrated lazy jack system.
• Self-tacking headsail, curved headsail traveller track with end stops. With New single line control sheet to cockpit.

• Aluminium Hatches & portholes (9 in total)

– 4 x Forward Hatches 18.5” x 18.5”
– 2 x Mid cabin hatches 18.5” x 18.5”
– 1 x Port Bathroom window hatch 20” x 15”
– 1 x Galley window hatch 20” x 15”
– 1 x Aft Cabin window hatch 20” x 15”

• Fibreglass Deck Hatches:

– 5 x Forward anchor & storage hatches
– 2 x Cockpit storage hatches

• 6 x Docking cleats. Each side : bow, stern & amidships
• 6 x Safety handles around cockpit
• 1 x Heavy duty mooring cleat on forward walkway
• Ventilation: 2 x forward cabin hatch vents
• Mast base turning blocks. All halyards & sail controls to cockpit
• 9x Rope clutches
• Sheet winches : 1 x 45ST – 2 speed self tailing, 2 x 40ST – 2 speed self tailing
• Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. With700mm high lifelines to meet CE requirements
• 2 x transom access gates with pelican hook releases
• 2 x side access gates with pelican hook releases
• Aft swim ladder: folding stainless aft swim ladder

• Pressure water system with water to galley and bathroom
• Fresh water tank: (185gallons) rotomoulded. Remote deck filler
• Electric fresh water pump
• Electric bilge pumps (2) with controls integral with master battery switch panel
• Manual bilge pumps (2) in each hull
• New Marelon through-hull fittings to CE/ISO standard
• Manual toilet in head
• 1 x LPG bottle – 10 lb
• Fresh water tank gauge

• Primary anchor is 45 lb CQR anchor type with 15 mtrs x 8mm short link galvanised chain and 40 mtrsx 16mm triple braid anchor warp
• Primary anchor is stored in a specially designed anchor roller under the forward beam
• 3 x PVC Inflatable Fenders
• 3 x Mooring lines (each 50’ x ½”)

The Multihull Source offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.