1 of 79
With its aggressive Deep V hull and interior creature comforts, the MAKO® 214 CC is the ideal balance of fishing performance and family convenience. Bow, forward console and aft seating adds comfort for family and friends, and the optional deck filler expands the forward lounge area.
The versatile 214 CC is overbuilt for safety and comfort. It rides on the legendary MAKO Deep V hull, which dominates chop with its aggressive deadrise and throws down spray with its reverse chines, resulting in a smooth, dry and stable ride. All this, and it's backed by the best factory warranty in saltwater boats—the MAKO Assurance.
Beam: 8' 6"
Bottom Width: 6' 7.5"
Max. Recommended HP: 250 HP
Fuel Capacity: 91 gal.
Max. Person Capacity: 10 persons
Max. Person Weight: 1700 lbs.
Max. Person, Motor & Gear Weight: 2550 lbs.
Interior Depth: 27"
Transom Height At Center Line: 25"
Deadrise: 18 degrees
Dry Weight: 3735 lbs.
Average Hull Weight: 3100 lbs.
Average Package Weight: 4535 lbs.
Package Height: 9' 3"
Package Height w/T-top or Hardtop: 11' 2"
Storage Length: 30' 8"
Certification & Safety
Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
Factory leak tested for hull, plumbing & fitting integrity
Flush-mounted Ritchie Navigation® Voyager compass
Custom anodized aluminum steering wheel w/knob
Tilt hydraulic steering
Binnacle-mounted motor control(s)
Mercury® SmartCraft® digital gauges
Heavy-duty electrical switching system w/battery selector switch(es)
Switch panel w/manual reset circuit breakers & illuminated switches
Easy access to helm electronics, instruments & switches
FUSION stereo w/4 speakers
Removable forward-console seat w/72-qt. (68.14 L) insulated, drained cooler
Integrated full-width footrest
Marine-grade tinned wiring w/submersible connectors
Lockable, sealed glovebox
Extra-large electronics mounting surface
2 console drink holders
12V DC outlet
Anodized aluminum leaning post
Helm seat w/flip-up cushion
Storage below seat
Space below leaning post for optional cooler
Outrigger-ready canvas T-top w/4 rod holders, electronics box w/mounting plates for antenna & spreader lights
.25" (6.35 mm) aluminum backing-plate reinforcement for T-top
Head enclosure/storage space w/stainless steel latch
Wiring access hatch & battery access
Main distribution panel inside head
Foredeck dodger mounting boss
2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
Port & starboard forward seats w/108-qt. (102.21 L) insulated storage below w/gravity overboard drainage
Forward cushions w/removable backrests
210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
Low-profile brushed anodized aluminum bow rails
2 gunnel-mounted rod holders
Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long
Aft stern seating w/folding center backrest
Molded non-skid surfaces throughout
Raw water outlet
Bilge access hatch
360° coaming bolsters
Five 6" (15.24 cm) polished marine-grade stainless steel cleats
2 stainless steel bow chocks
Legendary dry-riding MAKO® hull
Aggressive deep V hull design
Performance lifting strakes
Recessed electric trim tabs
Factory-matched stainless steel propeller
Construction & Exterior
Color: MAKO® Bone White gelcoat
100% composite construction
Coosa® Bluewater 100% composite transom core
Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
Closed-cell foam-injected stringer grid for USCG-approved flotation
Heavy-duty rub rail w/stainless steel insert
Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
Closed-molded hatch covers w/finished undersides & integrated gaskets
Aluminum backing plates for cleats & chocks
Swim platform w/3-step stainless steel ladder
Electrical, Mechanical & Plumbing Systems
High-speed raw water intake
USCG-compliant navigation lights
Interior courtesy lights
2 cockpit courtesy lights & 1 head light
NEW TRACKER® Lithium batteries
Dual battery rigging w/voltage sensitive relay (VSR) & emergency parallel switch
Marelon® corrosion-free seacocks on all below-water thru-hull fittings
Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
OPTIONAL tandem-axle EZ Loader® aluminum trailer available
14" (35.56 cm) radial tires w/galvanized V5 wheels
Oil bath hubs
Leaf spring suspension
Heavy-duty winch w/nylon strap & safety strap
Stainless steel hardware
Galvanized steel components
PVC loading guides