2020 Jeanneau SUNFAST 330033ft

Result of the collaboration of two renowned architects: Daniel Andrieu and Guillaume Verdier, the new Sun Fast 3300 is an extremely high-performance boat that is easy to sail alone or with a crew.

Daniel Andrieu, the naval architect behind the Sun Fast line since its inception, is a proven expert in optimizing for the IRC rating rule, as well as working with the Jeanneau builders to deliver boats of exceptional quality which Jeanneau customers expect. Guillaume Verdier, who is renowned for his work in the America’s Cup and Vendee Globe, will bring a mastery of computational fluid dynamics and finite element analysis to this project.

An innovative hull

• Creation of a double concave keel line, never seen before in a consumer market.
• The double concave shape corresponds to the hull shape which accompanies and does not disturb the shape of the wave.
• The use of this shape then makes it possible to limit the boat's drag as much as possible and thus optimize its performance.

An innovative keel 

• A major innovation compared to a traditional keel: the keel is thin as a whole and without bulbs, which allows the boat to perform well on all parameters.
• Slightly inclined backwards to prevent algae from clinging.
• Removal of the Sail Drive against a fairing around the Shaft drive that prevents algae from getting caught in it.
• Work on the boat's centre of gravity by moving the keel back about 1 metre compared to a traditional installation, which makes it possible to gain stability

A very remoted rigging and a square top main 

• Inclination of the mast aft with the position of the keel. The mast is set back about 1 meter on the roof unlike a standard mast in order to optimize the stability of the boat.
• The combination of the backstay and the square top main offers superior aerodynamic efficiency and more adjustment possibilities.
• The use of a square top main allows to catch the wind as much as possible.

The Sun Fast 3300 benefits from the latest advances in resin infusion to ensure exceptional strength and rigidity while drastically reducing weight. 

Resin infusion is a process in which every layer laminate and coring materual is placed in a mould dry and then covered with an air-tight plastic bag. A powerful vacuum is then used to pull the resin through the laminate to "wet" it out. 

This method eliminates voids in the laminate and ensures that the resin is evenly distributed. Because the amount of resin can be precisely controlled, more precise glass-to-resin rations can be achieved. 

The process is also more envrionmentally sound, as it greatly reduces VOC emissions released during the moulding process.

The Sun Fast 3300 includes :

• Infusion-moulded hull and structure with balsa coring 
• Infusion-moulded deck with foam coring 
• Infusion-moulded bulkhead with balsa coring

 

COMPLETE INVENTORY OF NORTH SAILS.

ON SHORE AND OFF SHORE.

ALL SAILS HAVE BEEN SELECTED AND OPTIMIZED BY KEN READ OF NORTH SAILS.

 

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.