2016 Beneteau Oceanis 4848ft

With its alluring sleek silhouette and a deck plan optimized for cruising, the Oceanis 48 is perfectly proportioned. Numerous options to maximize space and efficiency distinguish her from others.  She urges you to set off on long cruises and experience enjoyable stopovers.

1. Sail locker, access through deck hatch

2. Easy access to the anchor well - Self-bailing chain well - Clench bolt - Hatch cover

3. Mainsail arch

4. Handrails on the mainsail arch

5. B&G Zeus 12” (optional) multifunction touch screen built into the cockpit table

6. Cockpit wooden table incorporating handrails and able to accommodate an ice box (optionally refrigerated)

7. Silver Coachroof sprayhood

8. Dock & Go joystick and compass

9. Rope locker

10. Helm station, B&G electronics

11. Companionway with very gentle slope of 45°

12. Removable LED light

Design made following European Directive requirements and according to CE certification

• Monolithic hull in polyester

• Monolithic structural hull liner bonded to the hull

• Injection molded deck in glass fiber/balsa sandwich, covered with «diamond-point» non-slip coating

• Deck hull joint screwed, bonded and banded with 1 solid wood bulwark

• Cast iron keel fixed with bolts and stainless steel backing plates

• Rudder hung with glass composite stock

• White hull - Grey metal hull decoration

RIGGING

• Standard mast 9/10 anodized aluminium deck stepped, 2 aft-swept spreaders • Anodized aluminum boom

• Discontinuous stainless steel standing rigging

• 2 Backstays with turnbuckles

• Rigid boom vang

• Genoa furling system with drum on the deck

• 2 Stand Up blocks on mainsheet arch

• 2 Genoa tracks with piston adjusted traveller cars

• 2 genoa sheet turning blocks

• Rigging run back to cockpit (except boom topping lift)

• Complete running rigging: Main halyard, Genoa halyard with clutch on mast and cleat, Boom topping lift with cleat on mast, Mainsheet, 2 Genoa sheets 

• 8 Clutches

• 2 Halyard bags

WINCHES

• 2 Self-tailing Electric genoa sheet winches (H60.2 STC)

• 2 Self tailing coachroof winches (H46.2 STC)

• 2 Aluminum winch handles Speed Grip

• 2 Winch handle holders

SAILS

• Furling genoa with UV protective strip • Furling mainsail with UV protective cover on clew

MOORING - ANCHORING GEAR

• Self-draining chain locker - Clench bolt - Hatch cover

• Stainless steel bow fitting 2 rollers

• 12 V - 1500 W vertical electric windlass - Remote control

• 6 Aluminum mooring cleats - Stainless steel chafing plate

SAIL LOCKER

• Access through deck hatch T60

• Stainless steel ladder

• Shelving unit

SAFETY ON DECK

• 1 Open stainless steel pulpit

• 2 Stainless steel aft pushpits

• 1 Ring lifebuoy bracket

• 1 Outboard engine bracket

• Welded ring on pushpit for flag

• Double guard lines and stainless steel stanchions - Side boarding gate on either side

COCKPIT

• Self-bailing cockpit

• 2 Cockpit locker

• 2 Lockers in cockpit floor under helm's feet

• 1 Liferaft locker under helm seat (0,80 m x 0,40 m x 0,58 m / 2’7’’ x 1’4’’ x 1’4’’)

• 1 Gas locker for bottle(s) under the port helm seat

• Natural solid wood slatted cockpit benches

• 2 Steering wheel consoles: Stainless steel steering wheels - 900 mm diameter - White Composite - Steering gear at the helm station - Metal cable transmission system - Stainless steel handrail - Navigation instrument pod (optional instruments) - Cup holder

• 1 Deck filler for access to tiller system + Power supply access hatch

• 1 Emergency tiller

• 2 Steering compass on consoles

• Portside engine control and control panel

• Polyester cockpit table - 2 Trim tab - Glove boxes - 2 Large storage space - Stainless steel handrail - 12 V Power outlet - Lamp with shade

• Cold water cockpit shower

• 1 Fixed composite arch - Built-in lighting

• 1 Shore power socket to port

• 2 Hinged PMMA companionway doors - Sliding hatch made of PMMA

SWIM DECK / STERN DECK

• Fully opening transom, convertible into swim platform (2,85 m x 0,77 m / 9’4’’ x 2’6’’)

• Electrically operated

• Natural solid wood decking on swim platform

• 1 Stainless steel swim/boarding ladder - Solid wood steps - Folding

• Alpi Moabi wood interior

• Parquet type laminated floors

• Padding upholstery in salon and cabins (White)

• Fabric upholstery

• Marine mattresses in the cabins

COMPANIONWAY Headroom: 1,98 m / 6’6’’

• Wooden salon companionway with molded wood hanging steps with non-slip surface

• 2 Leather covered stainless steel handrails

SALON Headroom: 1,98 m / 6’6’’

• U-shaped salon bench - Double density foam

• Seating on pantograph with backrest

• Salon table in 1 piece - Varnished wood top with inlay - Aluminum legs

• Mirror on bulkhead

• Cupboard units - Cubby hole lockers and storage along the hull - Storage under bench seats

• Cubbyholes with stainless steel beading

• 2 Panoramic deck house windows with concertina blinds

• 2 Hull portholes with curtain

• 2 Opening portholes on coaming in side windows

• 1 Opening deck hatch with mosquito blind

CHART TABLE - PORTSIDE

• Sliding, can be configured with the armchairs - Placed against the forward bulkhead , against the galley or between the 2 mobile seats

• Table with flap - Molded wood beading

• Switch panel on bulkhead for access to electrical functions • Navigation instrument panel (without instruments)

• 1 Reading light 

GALLEY - PORTSIDE

Headroom: 1,90 m / 6’3’’

• L-shaped galley with separate sink located below companionway

• Synthetic solid surface countertop

• 1 Stainless steel sink 2 rectangular basins - 1 Mixer tap with hot/cold water under pressure

• 1 Gas stove 3 burners - Stainless steel oven on gimbal - Stainless steel protection handrail

• 1 100L / 26 US Gal icebox (12V), top opening

• 1 130 L / 34 US Gal refrigerator (12V), front opening

• Fitted cupboards and closed cubbyholes (Shelving, Garbage bin)

• 1 Lower unit: 1 Drawer - 2 Shelves

• Storage space along the hull

• 2 Opening ports on coaming with curtains on side windows

FORWARD CABIN

Headroom: 1,92 m / 6’4’’

• Central double bed (2,09 m x 1,55 m x 1,18 m / 6’10’’ x 5’1’’ x 3’10’’)

• Hanging lockers - Glove box - Cubby hole locker - Lower unit - Storage space under bed

• 2 Flush deck hatches with mosquito blind

• 2 Hull portholes with curtain

FORWARD HEAD

Completely built in to the cabin with:

TO STARBOARD

• Molded basin in grey countertop, mixing tap hot/cold water

• 1 Washroom storage cabinet

• 1 Mirror

• 1 Glass shower cabin with flush access and storage on the bulkhead

• 1 Deck hatch with mosquito blind

TO PORT

• Separate WC

• 1 64 L / 17 US Gal Rigid holding tank

• Hand basin

• Storage space along the hull

• 1 Deck hatch with mosquito blind

STARBOARD AFT HEAD COMPARTMENT

Headroom: 1,92 m / 6’4’’

• Access from the salon or the starboard aft cabin

• Separate shower - 1 mixing tap hot/cold water - Storage on bulkhead

• 1 Manual marine toilet

• 1 64 L / 17 US Gal Rigid holding tank

• Washbasin - 1 mixing tap hot/cold water

• 2 Mirrors

• Toilet accessories

• 1 Opening portlight with curtains in the coachroof side window

STARBOARD AFT CABIN

Headroom: 1,86 m / 6’1’’

• 1 Double bed (2,09 m x 1,18 m x 1,55 m / 6’10’’ x 3’10’’ x 5’1’’)

• Access door to starboard aft head

• Cupboard units, Hanging locker, Closed cubbyholes, Storage each side of bed

• 1 Large size hull port with curtain

• 1 Opening deck hatch with mosquito blind

• 1 Opening cockpit port with curtain

• 1 Glazing on companionway bulkhead 2 cabin layout, 2 heads

PORT AFT CABIN

Headroom: 1,86 m / 6’1’’

• 1 Double bed (2,05 m x 1,35 m x 1,55 m / 6’9’’ x 4’5’’ x 5’1’’)

• Cupboard units, Hanging locker, Closed cubbyholes

• 1 Large size hull port with curtain

• 1 Opening deck hatch with mosquito blind

• 1 Opening cockpit port with curtain

• 1 Glazing on companionway bulkhead