Raymarine Axiom 12 GPS/Plotter 2019
Raymarine Auto Pilot 2019
TVs (2) 2019
Raymarine Tridata-Depthfinder, Speed, Water Temp
Port engine removed from boat, shipped to HO Penn and rebuilt 2018
Starboard engine removed from boat and sent to Lighthouse and gone over by HO Penn 2018
New Water heater 2021
Raymarine Axiom Plotter/GPS 2019
TVs (2) 2019
The helm is a heads up fiberglass tilt-away helm station with full flush mount electronics. There is an oversized helm seat forward with wet bar and aft-facing seat. To the port is a spacious curved lounge with storage. Aft of the curved lounge is a standard aft-facing seat.
The cabin of Freedom is spacious and comfortable, featuring a double pedestal berth forward with plenty of storage below, hanging lockers, and hullside shelves. The head can be accessed from either the owner's stateroom or the salon. It has Corian countertops with sink, mirrored vanity, storage locker, and is a full fiberglass head with a separate shower stall including sliding door and sump pump. The U-shaped dinette with table and storage compartments below converts to a double berth and there is a pullman single berth above. The galley is well thought-out and features Corian countertops, S.S. double sink with pressure water system, recessed two-burner electric cooktop, built-in coffee maker, microwave oven, and refrigerator/freezer. There is a lot of storage.
The electrical system features a custom 12V and 120V master distribution panel under the steps, and an amp meter, reverse polarity indicator on a monitoring panel, 120V 30/50 amp shore power with power cords and a two bank 12V battery system and battery charger. ONAN generator.
She is equipped with Twin 435HP CAT 3208TA diesel engines. Mechanical features include a Teleflex hydraulic steering system with 22" destroyer wheel, bronze axe head rudders and struts, water cooled shaft logs, duel VDO engine instrumentation, fresh water cooling, Racor fuel filters, and more.
Full slant back enclosure
Drop down helm enclosure
Cockpit portable sun shade
Tiara’s custom diamond pattern non-skid is used on all deck and cockpit surfaces for sure, safe footing. The custom Tiara windshield is made of composite fiberglass that blends beautifully with the lines of the boat. A center ventilating section with power actuator is great for airflow while idling. The transition to the foredeck is easy with grab rails and a sturdy one-piece welded bow rail. Other features include three aluminum deck hatches with screens and privacy covers, flush forward anchor locker with overboard drain, and a fiberglass molded-in bow pulpit with S.S. roller assembly and windlass.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.