US$276,500 tax not included
|Offered By||Honolulu Yacht Brokerage International LLC|1997 Tayana 52
Robert Perry has written that the Tayana 52 is one of his favorite designs. Blending a low freeboard with a long waterline and a moderate beam, the Tayana 52 appears to be moving even when it's tied to a dock. Like most Tayana yachts, this ocean-proven greyhound is available in center or aft cockpit configurations. Side decks are wide and deck space is abundant. Typically sailed as a cutter rig, the Tayana 52 is remarkably seakindly for such a powerful hull and sail plan. Tayana 52's have won major offshore races. In many ways it can be said that the Tayana 52 is the kind of yacht that racing sailors choose to cruise.
EASY TO SHOW IN WAIKIKI !
IJPE : 1154.00 sq ft
I : 62.00 ft
J : 20.67 ft
P : 57.00 ft
E : 18.00 ft
Working Sail Area : 1156.00 sq ft
Manufacturer Provided Description
Hand-laminated fiberglass with PVC foam sandwich construction, with net and woven rovings, isophthalic resins. Isophthalic gelcoat on all exterior fiberglass surfaces. A matrix of longitudinal and transverse foam-cored stringers in the lower hull providing maximum hull stiffness. Internal cast iron ballast glassed into a modified fin keel with choice of drafts. Skeg-mounted rudder, with internal stainless steel rudder post and integral stainless steel reinforcement. The deck is of hand lay-up fiberglass construction using end grain light wood sandwich coring. All deck hardware areas are reinforced using encapsulated marine grade plywood. Deck hardware is through-bolted using stainless steel backing plates.
Ascending below from a spacious cockpit you have a double quarter berth to port and to starboard with the galley
fore to port and a head fore to starboard. The main salon has the comfortable and roomy navigation station
opposite the galley with a large dinette immediately forward and directly midship. The settee lies opposite to port.
As you go forward, a large head sits to starboard with a separate shower and the large main cabin encompassing
the area just behind the chain locker.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
|Shore Power Inlet||✓|
|Wind Speed and Direction||✓|
|Electric Bilge Pump||✓|
|Manual Bilge Pump||✓|
|Fresh Water Maker||✓|
|Engine Model||Yanmar 4LH-TE S/N 10703|
|Drive Type||Direct Drive|
|Propeller Type||3 Blade|
|Length at Waterline||42ft|
|Fresh Water Tank||2 x 200 gal (Stainless Steel)|
|Fuel Tank||2 x 200 gal (Steel)|