Sloop Consolation 42
Well-equipped and well-maintained aluminum ballasted centerboard.
Ready to go.
French flag. Tax paid for French Polynesia.
Based in French Polynesia
7 sleeps - 1 double cabin
Aluminium AG4 ballasted centerboard realized in shape by the ACGB Bavent shipyard in 1982 on the designs of Michel Joubert.
The bulkheads and topsides are in aluminum AG4, the underwater in epoxy mastic, epoxy primer and antifooling trilux interprotect, the through-hulls in aluminum and valves in plastic. The aluminium deck is welded to the hull.
Lead keel and aluminum centerboard controlled by a mixed polyester cable, passing on the deck through a tube and returned to a winch in the cockpit.
Wheel steering system, transmission with metal stock and chain under the helmsman's floor.
Aluminum rudder on 3 spikes on transom, protected by a skeg.
Yanmar 4JH4E 50 HP / 36 Kw engine (3800 h, 2007)
4 In-line crankcases, 1,76 L cylinder, indirect cooling by heat exchanger with spare part
Special kit for ground isolation
Transmission by shaft line via KM35P reverser and graphite rotary shaft seal
Three-blade bronze propeller made to measure by France Hélice, very powerful + 1 spare
1 Fixed aluminum fuel tank of 300L
Sloop with removable stay and backstay
Niravana anodized aluminum mast with single spreader
Nirvana anodized aluminum boom
Placed on the deck and maintained at the front by a stay, 1 removable stay, a baby stay and laterally by four cap shrouds and two baby stays
The entire standing rigging is made of multi-strand stainless steel cable
All the running rigging is made of pre-stretched polyester rope
Set of dacron sails:
1 Full battened mainsail
1 Furling genoa
2 Staysails
1 Storm jib
Lazzi bag and lazzi Jack
3 Winches two speeds self tailing
2 Barlow 27 winches (cockpit)
3 Barlow 19 Winches (cockpit)
1 Barlow 25 Winch (mast step)
1 Barlow Winch 24 (mast step)
2 * 6-strand mainsail hoists
7 Spinlock clutch (5 for the piano, 2 for the backstays, 1 for the Genoa line)
1 Pole
1 Electric windlass Lofran 12 V 1000W, wired remote control
Main anchor : 20kg fixed ploughshare anchor + 60 m chain
Secondary anchor : safety anchor + 20 m chain + rope
80 m webbing on reel at station
2 Fresh water tanks located under the saloon benches, total 250 L
1 Electric water pump 12 V
Storage tank
Water heater on pressurized circuit
1 Large refrigerated compartment equipped with a DANFOSS electric compressor powered by 12 V, air cooled
Reflex diesel heater with 30L tank (reliable and easy to use, lacks the external chimney, possible to have it redone in Tahiti)
Two burner stainless steel stove and oven
Lavac marine toilet
2 Fans (cabins)
Car radio MP3 player
3 AGM house batteries 12V 100 Ah
Optima maintenance-free lead acid engine battery, 12 V / 50 Ah
Victron battery manager
Leak detector
1 Original alternator
1 Mastervolt shore charger
4 Solar panels, total 370 W
1 Regulator 15 Amps
Inverter 12 V / 220 V / 150 W
Bipolar electrical panel for 12 V distribution, with one circuit breaker per notified function and an additional panel with fuse for the fridge
LED lighting: ceiling lights, reading lights with LED bulbs powered in 12V
2 Display boxes outside combining the functions log / speedometer / sounder / GPS (screen is almost unreadable in sunlight) and an autopilot NKE Lecomble & Schmitt lifting jack
1 Fixed VHF / ASN
1 Handheld VHF
1 Mer-veille
1 Self-steering vane
1 Fuel and water gauge
Navigation and anchor lights in LED
4 Classic life jackets
1 Horseshoe buoy
2 ABC mobile fire extinguishers
2 Manual bilge pumps
1 Submerged bilge pump powered in 12 V
EPIRB Kannad Manual beacon expired in 11/2019 but test OK
Dan buoy
Buoy with 100 m jet line
Aluminum hard bottom dinghy 3 m
Mercury 3.3 HP outboard engine (end of life)
The fore cabin has a large double berth that can be enlarged by a board to 1.90m wide at the head and 1.40m at the feet
Aft cockpit with 8 closed crew and 2 gas bottles of 13 kilos under the tiller
Roof with 5 opening and 5 fixed portholes
Non-slip paint
3 Hatchways
Two stages of guard-rails mounted on stanchions
Stainless steel tubular pushpits
Pulpits at mast
4 Rails for genoa and staysail
Large forward locker
2 Aft lockers
Last bottom paint : May 2020 (Hiva Oa)
Repair or change the mixed screen GPS, sounder, lock (unreadable in the sun)
Reinstall a radar
Install an AIS
Change the hood which is functional but used
Change the outdated safety equipment
Refit every 2 years (Trilux) to be done by April 2022 with change of anodes
Work in progress: 2 shrouds and anti-skid paint on the deck
Sturdy sailboat, ballasted centerboard.
Well equipped and well maintained.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.