2018 Chris White Atlantic 49MF
- View Full Specifications
New to market
- Engine/Fuel Type:
- Located In:
- Stuart, FL
- Hull Material:
- Current Price:
- US$ 990,000
Wabi Sabi is a third generation Atlantic 49 MastFoil catamaran. The patented MastFoil rig has the advantage of being one of the easiest to sail designs. The MastFoils are rigid sails that combined with the self tacking jibs provide similar sailing performance to a conventional sloop rig without the difficulty of hoisting, reefing, gybing and furling a mainsail.
In addition there is a bowsprit with a single line furler and a screecher that can be set or stowed easily.
The forward cockpit provides excellent visibility, ease of all sailing functions, visibility to deploy or haul the anchor , and superb safety.
When conditions warrant retreat to the inside pilothouse where there is a completely protected helm station with excellent visibility.
Wabi Sabi is constructed of vacuum bagged Epoxy-Vinylester resin and high performance glass fiber cored with PVC foam. Carbon fiber is used in all the high load areas and Kevlar is used strategically to improve resistance to penetration. The aft hardtop is carbon fiber over foam. The hull is faired and finished with Alexseal linear polyurethane. The hull is Kingston Grey and the topsides are Matterhorn White with a Safety orange bootstripe. The bottom features fixed keels built from glass over solid foam and attached to a finished hull. They can support the weight of the boat during beaching and protect the propellers and rudders.
All forward and side windows in the salon are tempered glass for lifetime scratch and UV resistance. The windows have 3M Ceramic film for heat and Ultraviolet Light reduction and they also have Dometic Oceanaire reflective blinds for heat rejection and privacy.
WabiSabi is a first quality build and equipped to go anywhere in safety and comfort.
Please contact Chris White at (508) 636 - 6111
Additional Specs, Equipment and Information:
LOA: 48 ft 9 in
Beam: 24 ft 3 in
Maximum Draft: 3 ft 6 in
Bridge Clearance: 64 ft 0 in
Headroom: 6 ft 5 in
Dry Weight: 20000 lbs
Fresh Water Tanks: 1 (85 Gallons)
Fuel Tanks: 2 (90 Gallons)
Holding Tanks: 1 (48 Gallons)
Number of double berths: 3
Number of heads: 3
Hulls, decks, bulkheads and pilothouse are constructed from vacuum bagged Epoxy-Vinylester resin and high performance glass fiber laminate cored with PVC foam.
Carbon fiber reinforced crossbeams
All exterior surfaces are spray painted with Alexseal linear polyurethane coating.
Interior joinerwork and floorboards are cored panels to provide rigidity at low weight.
Propulsion and Steering
Twin Betamarine 43 HP diesel engines with in-line shaft drives. Hours: 250“D” instrument panels, 180 amp alternators with serpentine belt drives.
Primary and secondary fuel filters.
BRIGHT fluorescent lights in each engine room.
Dual “ZF Micro Commander” electronic single lever engine controls mounted at both the cockpit helm station and pilothouse inside helm.
Aquadrive CV shaft and thrust bearing
Flex-O-Fold Bronze 3 blade geared folding propellers
KTI filter boss system with dual Racor filters, pressure alarms and fuel polishing capability
Rudder blades are fiberglass composite, high performance hydrofoil section with solid rudder stocks turning in low friction bushings.
Mast and Booms
Double tapered carbon fiber masts, fitted with lightweight composite MastFoils
Masthead light, masthead VHF, wind instruments
MastFoil rotation controls, halyards are led to cockpit.
Jib Booms for self tacking.
Self tacking jib hardware each with Harken Unit 2E electric reefing/furler.
Carbon jib booms, forward composite crossbeam and compression beam.
Fusion moulded sails by Ullman Sails. UV cover on foot and leech. Self tacking hardware.
Composite bowsprit with ZL Fabric Screecher on Facnor Furler
Type 316 1x19 SS wire headstay inside furler.
Kevlar K-49 shrouds
Dyneema halyards and control lines. Low stretch Dacron sheets.
Harken "Radial" self tailing winches:
Two, Harken #46 Electric Radial winch for jib outhaul/sheet
Two, Harken #46 Radial winch vang/preventer controls
0ne, Harken #40 Radial winch for mizzen halyard
Two, Andersen Line Drivers for MastFoil control
Harken ball bearing blocks are standard equipment.
Spinlock rope clutches
Each hull has a collision bulkhead forward.In event of collision damage to the forward part of the hull water will not flood the hull past the collision bulkhead. In addition, in the event of capsize the collision bulkhead is designed to keep the hull forepeak dry allowing a safe habitation place for the crew. The starboard hull incorporates an "escape hatch" on the inboard hull side adjacent to the collision bulkhead which allows easy access into the boat should capsize occur.
Electrical(12) Solara M semi flexible, walkable solar panels. 2 Kw total output (6) Victron solar controllers to minimize shading losses 24-volt circuit breaker panel with Vicron battery monitor House battery bank, (2) lithionics 300 a/h 24V OPE-Li3 with BMS
2 Lithium Ion engine start batteries
Li Ion communications battery
(6) 24V bilge pumps
Intellian satellite antenna with direct TV and Samsung 32” TV in saloon
LED interior lights
(2) Victron Multiplus 3Kw Inverter/Charger provide AC power from the batteries.Victron Color Monitor,Shorepower connections in front and rear cockpits Air Conditioning
Dometic turbo series 16K BTU with soft start
Spendide Combo unit
2 x Composite 90 gallon each diesel fuel tank with deck fill, shut off and gauge
1 x Composite 85 gallon water tank with deck fill, vent and gauge
1 x Composite 44 gallon holding tank.
Desalinator Spectra “Catalina” 13-14 gal/hr
Furuno 15 inch TZTL MFD in pilothouse
Furuno 12 inch TZTL MFD in cockpit
Dual Furuno Autopilots with the Port unit completely independent the Starboard unit on the network
Furuno AIS FA50 Furuno radar DRS4D
Furuno Sounder digital Black box BBDS1 w525TID –BHD transducer 2ea Furuno Display 170 for cockpit wind, depth speed data
Airmar Ultrasonic weatherstation wind instrument Aegian WiFi booster
Hull and Deck Ventilation:
13 Deck hatches, all Lewmar Ocean Series. Accommodation area hatches are equipped with roller shade/screens.Access hatches from shower to forepeak also upgraded to Lewmar 70 on both sides.
(1) Goiot hatch is installed on the starboard hull inboard side as an “escape” hatch.
(2) Lewmar Atlantic opening portlights with clear plexi windows,(2) Lewmar low profile 00 hatches, adjacent to each double berth in a 6” recess, in each stateroom.
Lewmar Atlantic model opening port is located adjacent to each double berth
Cowl vents each head
(9) Hella fans, two in each double berth, two in pilothouse, salon and galley
Rails and Lifelines:
Custom fabricated SS stanchions and lifelines with solid s.s. grab rail next to pilothouse and extending to s.s. mid-ship boarding gates.
(2) SS Transom grab rails
Integral swim step on rudder
S.S. swim ladder
Dual bow anchor rollers enable two anchors to be easily used at the same time.
Dual Lewmar V3 windlass with rope/chain gypsy and dual direction switch for each anchor.
Self-bailing lockers for self stowing chain and rode.
Anchor washdown pump
Ground TacklePrimary Anchor 55lb Rocna with 75' 3/8” chain and 150' 8 plait nylon rode. The second anchor Fortress FX 37 with 20' 3/8” chain and 150' of 5/8" rode.
Cleats and Docklines
Six 10" docking cleats, 2 bow, 2 stern, 2 spring line
Two 10” mooring cleats
Four (4) 5/8" 3 strand nylon docking lines each 40' in length
LED masthead Tri-color and anchor light
Mast mounted steaming light
LED deck level running lights
GalleyForce 10, 3 burner LP stove/oven Two 20lb. composite propane bottles in a self venting locker Galley sink is a TEKA deep bowl polished stainless steel with strainers set flush into a Granicoat counter top Hot and cold pressurized water delivered by single lever pressure water mixer with sprayer. Ample drawers, lockers and shelves for storage. Built in trash container. (2) VITRIFRIGO refrigerator/freezers
(2) Dometic 8116 freshwater flush in forward heads
(1) Lavac manual saltwater head in aft cabinEach head is equipped with a vanity with polished stainless steel sink with hot/cold pressure water. Granicoat laminate countertop (color to match galley) and stowage locker beneath. Two large stowage lockers with shelves for towels, etc. are on the inboard side within easy reach.
ShowersHeads have adjacent showers Semi-gloss polyurethane finished surfaces for easy cleanup Hot/cold pressure water with single lever mixer and pull-out shower head mounted on a vertical bar. Waterproof light Sump pump Lewmar access hatches to forepeak.
Forepeak Each hull has a large dedicated storage area forward. Deck access is via a large hatch and aluminum ladder into each forepeak. Within the hull is a horizontal platform that can be used for storage of bulky items or an extra berth.
Hot Water Heater
Isotemp 40 liter dual function (dockside power or engine heat exchanger) water heater.
A hot and cold water pressurized rinse station is installed on the hull transom boarding platform.
Workbench (port hull)Polished SS counter Drawers and lockers under workbench for tools and parts storage Lockers above for stowage Integral "Safe Place" for documents, cash, valuables
Exterior FinishThe exterior of the boat, above waterline, is spray painted with Alexseal™ linear polyurethane coating. Walking areas are Alexseal with non-skid additive.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from Chris White Designs
Unknown, FL, United States
Satsuma, FL, United States
Unknown, RI, United States
Unknown, ME, United States
saint georges, Grenada