I'm a boater! Email me yachts and information.

I accept YachtWorld's Terms of Use

2014 P1 Panther 28SS

US$ 49,995*
Senstosa Cove, Singapore
Interested in this boat? Tel: +65 9155 4060
  • Description
  • View Full Specifications

2014 P1 Panther 28SS 29'

Engine/Fuel Type:
Single / Gas/Petrol
Located In:
Senstosa Cove, Singapore
Hull Material:
Current Price:
US$ 49,995 

Priced to Export!

At this price, you can ship her home!

Designed for speed and performance, the P1 is a very fast and fun boat capable of speeds in excess of 70+MPH (60+ knots) due to her Evenrude 250 High Output ETEC engine with 4 blade Mercury racing prop. 

She is the 4 seat version so you can also bring your friends.  The hull was recently wrapped with a stylish new design and she looks sharp.  The orange and white interior also looks great. 

Manufacturer Provided Description

This 28 ft. sport racer is powered by a 250+ hp engine. This propels the boat to speeds up to 70+mph in flat water, and its lower center of gravity provides greater stability and improved handling. There is a removable rear cowl to access rear bench seat for additional passengers, when the Panther is used as a leisure craft. It is built to NMMA and ABYC boating standards, and CE certification is pending.


Composite core and stringer materials control weight and simplify the lamination process, with vinylester resin to bond the matrix. The boat's 100 percent composite construction created a completely unitized structure for endurance and safety.

The Panther has a bi, tri, and quad-directional knitted fiberglass hull with twin step shape.

Safety features: crumple zones and Kevlar cockpit give 360 degree impact-penetration protection.

Length from the bow to the bottom of the transom and overall. The length from the bow to the transom (not including the notch) is 26'8". The LOA is 28'9" (Beam is 7'9")

The boat comes with a power jack plate, providing 5" of vertical travel. This can place the prop-shaft from 2" to +3" in relation to the keel.


The cockpit design was engineered to provide many of the elements of an enclosed cockpit in a "commercially viable" open-cockpit configuration. The cockpit liner is integrated into the deck component, independent of hull sides. The space between the cockpit liner and the hull sides is supported by bulkheads creating “crumple zones" providing a 360 degree additional layer of protection for the pilots from both water intrusion and collision impact.

Access to the forward compartment of the boat is only available through a deck hatch, leaving no open access for water to enter the cockpit at the pilot level to cause hydraulic related injuries. Placement of driver/navigator inside the cockpit ensures maximum protection from water impact and collision, with their shoulders at or below the level of the side of the deck line, within the isolated cockpit liner. A polycarbonate wind screen provides secure protection from wind and water while providing outstanding visibility.

The Panther comes standard with the following: Recaro suspension seats, 30 gallon ballast tank, carbon fiber dash, Garmin 740 NMEA Compliant Chart Plotter, external hydraulic steering, poly-carbonate windscreen, integrated lifting hardware, stereo.

Foot throttle accelerator, configuration for driver/throttleman operation, boarding ladder, 4-person intercom integration, rear seat comfort package, custom graphics.

Engine and transmission

The engine is an Evinrude (BRP) 250HO ETEC (model E250HSL) with a 20" center section

  • Prop: Mercury Racing Bravo 4-blade in a lab finish configuration. It is a 26" pitch standard rake.
  • Shaft length mm (in) / 508 (20")
  • Weight kg (lbs) 231 (509)
  • Engine Type Loop Charged V6 90 degrees E-TEC Direct Injection
  • Bore x Stroke mm (in) 98 x 76 (3.854 x 3)
  • Displacement cc (cu in) 3441 (210)
  • Ignition System IDI Fast Rise Inductive Ignition
  • Knock Sensor
  • Starter Electric
  • Trim Method FasTrakTM Power Trim and Tilt
  • Propshaft kilowatts (HP)* Factory Tuned for High Performance
  • Full Throttle Operating Range 4500-6000 RPM
  • Gear Ratio 1.85:1 High Speed
  • Fuel Induction E-TEC Direct Fuel Injection with stratified
  • Low RPM combustion mode
  • Alternator Variable Voltage Computer Controlled
  • 133 Amp**/1800 watt output with
  • Regulator
  • Cooling Pressure and Temperature
  • Controlled Water Cooled
  • Steering is remote

Online Boat Auctions and BOBBAS, BASCO's Online Boat Buying And Selling platform, are the way forward to get genuine boat buying value as boat owners who work with us at BASCO are pre-approved boat owners with boats that are seriously for sale. If you wish to participate in either buying a boat, or selling your boat faster with our Combination Boat Selling Program, contact us now for more information.

Please contact William Schick at +65 9155 4060

Interested in this boat? Tel: +65 9155 4060
Visit Website
*This price is based on today's currency conversion rate.
Email Us
Please enter a valid name!
Please enter a valid email address!
RE: P1 Panther 28SS, Senstosa Cove, Singapore
Message cannot be empty!

Tel: +65 9155 4060
BASCO Online Boat Sales

11 Cove Drive
Senstosa Cove

BASCO Online Boat Sales
Please enter a valid name!
Please enter a valid email address!
Message cannot be empty!