2014 Farrier F-22
cheap and easy
- View Full Specifications
- Engine/Fuel Type:
- Single / Gas/Petrol
- Located In:
- Barnstable, MA
- Hull Material:
- Current Price:
- US$ 52,000
Escapade is a very nicely finished example of a plan-built Ian Farrier F-22.
The builder paid close attention to detail during the build process and was meticulous in making sure he was building to the plan specifications. This is a light weight boat that is a flyer!
Launched in 2014, this tri has been lightly used. The sails are in outstanding condition. Escapade has always been dry-sailed (no bottom paint).
Beams, folding system and mast raising system purchased directly from Farrier Marine; the mast from Ballenger Spars. All other components hand crafted by the builder including a very strong carbon bow pulpit.
Please contact Master User at 508 295 0095
Additional Specs, Equipment and Information:
LOA: 22 ft 11 in
Beam: 18 ft 1 in
Total Power: 6 HP
Engine Brand: Tohatsu
Engine Model: SailPro
Engine Type: Outboard 4S
Engine/Fuel Type: Gas/Petrol
Propeller: 3 blade propeller
Engine Power: 6 HP
Number of heads: 1
Designer / Builder
Designer: Ian Farrier, Farrier Marine, Christchurch, NZ
Builder: Paul Swanson
L.O.A. - 22' 11" (7.0m)
B.O.A. - 18' 1" (5.52m)
L.W.L. - 22' 3" (6.78m)
Draft (Board Up) - 12" (0.31m)
Draft (Board Down) - 4' 11" (1.51m)
Folded Beam - 8' 2.5"
Mast Length - 31.5' (9.6m)
Approx. Bare Weight - about 1400 lbs (It weighed 2350 with the trailer)
Float Displacement - 3078 lbs (1399 kg)
Interior Headroom - 5' 4" (1.64m), 6' 2" (1.88m) with optional "pop top"
Main Cabin Width - 7' 2" (2.19m)
Height On Trailer - 8' 8" (2.64m) (will depend on trailer used)
Meticulously built to Ian Farrier's plan specifications.
Fiberglass over foam
Carbon where appropriate
Beams, folding system and mast raising system were purchased from Farrier Marine, all other components fabricated by the builder.
This "cuddy cabin" version of the F-22 is optimized with a large cockpit for day sailing but the v-berth will accommodate 2 adults for sleeping. No interior cushions are included.
There is a dedicated location for a porta-potti (to starboard of the daggerboard trunk - see photos).
Sails are Doyle Stratus and have a grey taffeta on one side
Mainsail with bolt rope, boomless design
Jib with hanks
Main & Jib - 328 sq.ft (30.5sq.m.)
Screacher - 262 sq.ft. (24.34sq.m.) - NOT INCLUDED
Aluminum rotating mast by Ballenger Spars (per the designer's specs)
Colligo synthetic capshrouds; stainless steel forestay
2:1 Jib Sheets (no cabin top winches for the jib)
Cockpit coaming mounted swivel cam cleats for easy traveler control
Custom CARBON bow pulpit
Ready for the addition of a bow sprit (not included)
Tohatsu SailPro 6HP w/ 3 Gal gas tank
Blue hulls with tan deck
Beige Sunrise wingnet trampolines
White painted interior
Canvas companionway "doors"
Ritchie bulkhead mounted compass
Several different length hiking sticks
LoadRite Elite single axle aluminum trailer
The Multihull Source, Inc. offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from The Multihull Source
Gloucester, MA, United States