2013 Protector Targa 30

Additional Specs, Equipment and Information:

Specs
Warranty: 5 years
Hull Shape: RIB

Dimensions
LOA: 30 ft 6 in
Beam: 9 ft 6 in
LWL: 26 ft 0 in
Minimum Draft: 1 ft 3 in
Maximum Draft: 2 ft 1 in
Deadrise: 23 ° at Transom
Dry Weight: 7900 lbs

Engines
Total Power: 400 HP

Engine 1:
Engine Brand: Yamaha
Year Built: 2013
Engine Model: 4 Stroke
Engine Type: Outboard 4S
Engine/Fuel Type: Gas/Petrol
Location: Starboard
Engine Hours: 361
Engine Power: 200 HP
Engine 2:
Engine Brand: Yamaha
Year Built: 2013
Engine Model: 4 Stroke
Engine Type: Outboard 4S
Engine/Fuel Type: Gas/Petrol
Location: Port
Engine Hours: 361
Engine Power: 200 HP

Cruising Speed: 32 mph
Maximum Speed: 55 mph

Tanks
Fuel Tanks: (130 Gallons)

Accommodations
Number of heads: 1

Electronics
Depthsounder
Plotter
GPS
VHF
Radar
Radio
Cockpit speakers

Inside Equipment
Electric bilge pump
Electric head

Outside Equipment/Extras
Cockpit cushions

Covers
Cockpit cover

Additional Equipment
Road trailer

Manufacturer Provided Description

The 30’ TARGA successfully combines design and comfort for unrivaled performance on the water. The Protector 30’ TARGA is the latest in performance innovation on the water, the TARGA 30’ was designed to fill a void in Protectors product lineup to enhance on the successes of the 28’ model for those requiring more room, enhanced ergonomics and bigger power, yet still easily trailerable.

The Protector 30’ TARGA is the perfect any weather vessel that can be customized to suit your year round boating needs. Basic design considerations include a large anchor locker for underbow automated anchoring, and wider bunks inside cabin for more comfort. The dashboard has also been redesigned to accommodate larger displays and better ergonomics for electronics, and higher steering wheel placement for more room at the helm. 6 additional square feet of aft deck (compared to our 28’ TARGA) for easier boarding and the option for a stow able picnic table.

The helm has been redesigned for the option of shock mitigating captain’s chairs, which permit cruising at high speeds in rough conditions while maintaining excellent visibility, control, and comfort.

The engine wells have also been enlarged to accommodate today’s larger V-6 four stroke Outboards. Increased hull length while maintaining the same beam and dearies translates to 180 lbs of additional buoyancy for the perfect balance of boat and outboards for getting to where you’re going regardless of the sea state with complete confidence.

Standard Features

Sponsons

PROTECTOR Hypalon sponson with Armour Guard chafe resistant rub rails and nose cone
7 Individually Sealed Air Chambers
Standard Colors: Black, Dark Grey, Red, Yellow, Dark Blue, White, Light Grey
Rescue line (black) along entire length of each sponson
4 Grab handles on aft end of rear sponsons
Port and stbd grab handles on bow sponson
Sponson pressure gauge

Hull & Deck

3/4” solid hand-laid fiberglass hull with exclusive Protector High-Impact hull design
Fiberglass Hull (5 Year Warranty)
Proprietary sponson cutouts for sponson integration into hull
Solid 4 stringer system
Port and stbd SS self-bailing scupper caps
Port and stbd 2.5” SS self-bailing water drains fwd deck
6 performance strakes / chines along hull
316 SS towing eye
Self-draining anchor locker
1000 GPH manual bilge pump & 1100 GPH auto-bilge pump
Non-skid decks featuring rubber sure-foot flooring system
Port and stbd watertight aft lockers for mounting independent remote engine systems
Non-skid gunnel walking rails atop sponsons
Fixed Electric head with 15 Gallon Sewage Holding Tank

Fuel

Pressure tested 130 gallon fuel tank
Port and stbd fueling stations
Longitudinal and transverse baffles in fuel tank
Dual fuel tank pickups
Dual Racor water separators with see-through bowl (1 per motor)
Removable WEMA fuel sender for fuel tank inspection

Cabin

Proprietary Protector wrap-around windshield w/ weather-tight side slide windows
Extra wide soft rider pedestal seats for Helmsperson and Navigator
Dual wide dash displays for Helmsperson and Navigator
Two overhead red/white LED dome lights
Port and stbd aft quarter seats
Two 12” SS cabin edge handrails
Two 9” SS overhead cabin handrails
Two walk around house roof mounted rails 40”
U Shaped 6 point SS cabin top grab rail
Blue Sea Systems 12-unit fuse panel with clear view cover
Blue Sea Systems remote battery switches at helm
Two 6’4” padded bunks with 3/4 shelf along port and stbd bulkheads
Two watertight quarter seat console hatches for major electronics
Lockable cabin washboards

Accessories

12-volt power receptacle
Anti-corrosion sealant and marine grade shrink tube on all electrical connectors
LED Navigation & anchor lights
Group 24 AGM engine batteries (one for each motor)
Group 36 AGM house battery
BEP Battery switches on both Group 24 AGM batteries w/ dual voltage sensitive relay modules
BEP Emergency battery parallel switch
Two-speed Imtra wipers with freshwater wash
House battery voltmeter
Lenco commercial trim tabs – auto retract

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.