2009 Culham Engineering Cutter Rigged Sloop
- View Full Specifications
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Hull Material:
- Current Price:
- US$ 2,900,000 Tax Paid
A Sailing yacht with an excellent reputation due to her luxurious and exhilarating cruises
to the remotest corners of the Southeast Asian waters.
The interior is luxuriously furnished with teak paneling, soft furnishings and drapery framed in stunning Thai silks.
Unlike many ocean cruising vessels you are afforded superb line of sight throughout the interior of the vessel, whether dining or lounging.
Please contact Boats & Barcos at +34 966 444 111
Additional Specs, Equipment and Information:
Builder: Culham & Whangarei Engineering
Flag of Registry: Malaysia
Beam: 7.50 m
Maximum Draft: 2.90 m
Displacement: 90000 kgs
Total Power: 260 HP
Engine Brand: Gardner
Year Built: 2009
Engine Model: 8L3B
Engine/Fuel Type: Diesel
Engine Power: 260 HP
Cruising Speed: 10 knots @ 750 RPM
Maximum Speed: 12 knots
Fuel Tanks: (12500 Liters)
Number of twin berths: 1
Number of double berths: 4
Number of cabins: 5
Wind speed and direction - Furuno Wind and Multi Control
Radar - Furuno NavNet BlackBox 72NM
Depthsounder - Furuno NavNet Weather and network sounder
Autopilot - Furuno NavPilot 500, Furuno NavPilot 511 for secound Station and backup. (2X)
Fully battened mainsail - 180 sq.meters
Genoa - Dacron Genoa 200 Sq.meters by Tasker (2009)
Trisail - Furling Dacron Staysail 90Sq.Meters by Tasker (2009)
A tour of this engine room will immediately point out the superb layout of machinery to make practical and easy maintenance possible whether at anchor or at sea. ASIA was designed with the ability to cruise in remote areas where on board maintenance had to be easily achieved.
The main engine is a 260 HP Gardner 8L3B know in the industry as the Rolls Royce of marine engines.
This particular engine was manufactured by Gardner in the UK in 1967 and completely rebuilt by Gardner specialist Dave Shaw Engineering in New Zealand. Her condition was new and rated at 0 hours use when purchased for ASIA in 2007. All was properly documented and engine log books have been updated throughout the life of the engine. Current hours 11,000.
One of the objectives of the owners was to store as little fuel as possible allowing them to select the best fuel supplier in a particular cruising area. The fuel consumption is 16 L per hour which results in an average cruising speed of 8 knots under engine alone. This permits a theoretical cruising range of 6250 NM.
The propeller system is linked to a Dong – I gearbox and a Scan CP-12 variable pitch propeller.
ASIA’S electrical power is generated by two gen-sets:
Cat 20 kw single phase generator with 11,000 hours.
Polar Power 14 kw DC generator with2500 hours
2x 3KW Balmar alternators on the main engine
36x Trojan T 105 batteries @ 1800AH
Hybrid power system based on energy efficient 3x 3KW Victron Multiplud
Most navigation equipment is Furuno and includes:
Furuno NavPilot 500 autopilot
Furuno Nav Pilot 511 autopilot for second station and back up
Furuno wind and multi control
Furuno NavNet weatherfax & network sounder
Furuno NavNet BlackBox radar 72 NM
Maretron ships monitoring N2K View
The rig of ASIA has been purposely designed to provide the yacht a maximum sailing performance in a wide range of weather and wind conditions.
Her spars have been constructed of laminated extrusions by David Lambourne Yacht Rigging of Brisbane, Australia.
AES New Zealand provided full design and load analysis. ASIA’s carbon fiber boom is a Park Avenue design which enables easier mainsail handling.
Fully battened 12/14 Oz Dacron mainsail @ 180 sq. meters. New Ullman SA with stack pack (July 2014)
Furling Dacron Genoa 200 SqM by Tasker (2009)
Furling Dacron staysail 90SqM by Tasker (2009)
The mainsail is hanked on by an Antal bat car system. The genoa and staysail are set on Harken hydraulic furling systems.
All winches are Antal electric winches
2x Antal ST 90/3 speed/ for the genoa sheet
2x Antal ST 70 / 2 speed / Mainsheet and main car control
2x Antal ST 70 / 2 Speed for mainsheet and main car control
Tenders & Watersports
2008 Aquapro with center console powered by a Suzuki 4 stroke 90HP motor
One FeelFree double kayak
Three standup paddle boards and paddles
One set of waterskies with a slalom ski
Two knee boards, one wake board
One 3 person hot dog eagle design
10 Scubapro BCDs with emergency sausages
15 Alu dive tanks in service
Ten Scuba rigs with Primary, Octopus, SPG and depth gauge
Ten weight belts with 40 - 50 kg dive weights
12 short wet suits of different sizes
16 fins of different sizes
Ten full face masks, black silicone
One Dan Emergency oxygen breathing kit
2 medical oxygen cylinders
One Bauer Junior Dive Compressor
Custom built tank storage rack and filling station for four tanks at a time.
Two Plastimo 8 Man Transocean Life rafts
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.