2009 Catana 65

US$ 1,015,029*
Interested in this boat? Tel: +385 (0)98 222 949
  • Description
  • View Full Specifications
Engine/Fuel Type:
Twin / diesel
Located In:
Hull Material:
Current Price:
EUR  870,000 Tax Paid (US$ 1,015,029) 

Overall length 64.63 ft
Overall length with bowsprit 68.14 ft
Water line length 63.35 ft
Beam 31.36 ft
Light displacement 23.9 t
Draft boards up 4.27 ft
Draft boards down 10.17 ft
Mast clearance 87.60 ft
Mast length 80.38 ft
Main sail area 1496 sq ft
Up wind sail area 2411 sq ft
Down wind sail area 2712.5 sq ft
Engines power 2 x 110 hp
Fresh water capacity 211.34 us gal
Fuel capacity 396.26 us gal

Layout: 3 separated cabins with 3 separated heads +1 skipper cabins

Crew: one cabin with double bed.

No. Cabins: 3+1 skipper

No. Heads: 3


Mast and Rigging
Aluminium Mast from Marechal lacquered in white with spreaders, 24.5 m length (80,38 ft) :
- LED Anchoring light
- Openning for main sails, genoa, solent and spinnaker halyards and topping lift
- Combo steaming light and deck light
- Main sail cares and track from Harken
- Lazy Jacks padeye
- Aluminium mast foot black anodised
- Double Windex at top of the mast
Aluminium boom from Marechal white lacquered :
- Reefing lines blocks from Harken
Miscellaneous :
- Aluminium Front beam white lacquered from Marechal
- Aluminium compression beam white lacquered from Marechal
- Facnor LS furler on the main stay
- Stainless steel Rod stay for the genoa
- 2 Monotoron stainless steel shrouds

Running rigging
Running rigging from Lancelin with sent back system to the cockpit :
- Dyneema Main sail Halyard Ø 14 mm 2 :1 on the back beam
- Dyneema Double main sail sheets Ø14 mm on the back beam
- Dyneema Genoa halyard Ø 14 mm at mast foot
- Dyneema genoa sheet Ø 16 mm in the cockpit
- Polyester genoa furler rop Ø 8 mm in the cockpit
- Dyneema luff reefing lines Ø 14 mm on the back beam
- Polyester tack reefing lines Ø 14 mm on the back beam
- Dyneema topping lift Ø 12 mm on the back beam
- Polyester daggerboard rop Ø 12 mm in the cockpit

2 speeds Aluminium Winches self-tailing from Harken:
- 2 Winches for genoa and spinnaker sheets, 80 Radial
- 2 aft beam 80 Radial Winches: with 1 electrical winch, dedicated for mainsail halyard and sheets,
reefs and topping lift.
- 2 60 Radial Winches for daggerboard and furler rop
- 1 Winch on mast 50 Radialfor front sails halyards
Main sail :
- Double sheet tackle from Harken Ø 100 mm fix with snap shackle CATANA 65 Custom Carbon –
Specifications A-2012 ANG 4
- 4 Harken 648 Padeye for main sail sheets
- 2 Harken 629 Padeye for gybe preventer
Genoa :
- 2 track from Harken
- 1 Antal track on the mast to trim the genoa halyard
- 1 Spinlock XAS 08/14 furler rop jammer in the cockpit
Back beam manoeuvres :
- 3 Spinlock ZS 12/14 for luff reefing lines
- 3 Spinlock ZS 12/14 for tack reefing lines
- 1 Spinlock ZS 12/14 for main sail halyard
- 2 Spinlock XCS 14/16 for main sail sheets
- 1 Spinlock XCS 14/16 for topping lift
daggerboards :
- 2 Harken blocks Ø 102 mm in the daggerboard hole
- 2 Spinlock XTS 08/14 in the cockpit
Blocks boxe to send back the lines :
- Stainless steel blocks boxes with Harken blocks Ø 127 mm
Mast foot :
- Lofrans 2500 W windlass with wire remote control connected in the anchor locker and remote control
at the starboard helm station.
- 1 Nylon bridle Ø 24 mm with two eyes to fix it on the bow cleats
Front beam :
- Rotative Stainless steel anchor bed for main anchoring line

- Rotative Stainless steel anchor bed for main anchoring line
Deck Equipment
- 2 Double polyester steering seats (stand/seat positions) with backrest, handrail and outside protection
- 2 Cockpit seats convertible into lounge chair
Portlights and hatches for vent and light (depend of the layout) :
- 2 Sails lockers hatches 561x561 mm with vent
- 4 Escape hatches 559x485 mm inside hulls
- 2 Hatches 511x381 mm on top of the roof for ventilation with mosquito screens
- 1 Hatche 511x381 mm on top of the starboard aft cabin
- 2 Portlights 649x192 mm in front of the roof
- 8 Portlights 649x192 mm outside hulls
- 1 Portlight 649x192 mm inside hull of the port aft cabin
- 6 Portlights 369x192 mm in the toilets
GRP polyester /glass hatches :
- 4 Cockpit hatches with teak
- 1 Cockpit seat hatche front of cockpit window
- 2 Fuel hatches at mast foot
- 2 Liferaft hatches at mast foot CATANA 65 Custom Carbon – Specifications A-2012 ANG 5
- 1 anchor locker hatche at mast foot
Sécurity :
- Life line around the roof
- Hand rail and footrests made in solid teak
- High confort Trampoline
- 2 Fore pulpits with not rot wood FSC seats with LED navigation lights
- Stainless steel aft handrails at top of the transom
- 10 Stainless steel stanchions 60 cm high
- Double stainless steel covered stranded Ø 4 mm
- 2 Side door 1,4 m wide
- 10 Aluminium cleats big size 450 mm

Cockpit Equipement
- Aluminium white lacquered sliding door/window, plexiglas glass
- 3 Ropes boxes in the aft beam with teak covers
- 1 Big locker in the cockpit seat
- 4 Big lockers under the cockpit
- GRP Glass cockpit table with Aluminium foot
- Storage in the cockpit seat backrest
- Soft Dralon Bimini toile with central plateform to manoeuvre the boom included the cockpit lights
- 2 Aluminium white lacquered davits Spinlock jammers and lifting ropes for dinghy.
Helm stations and steering
- 2 GRP glass pulpits design CATANA
- 2 Inox retractable helm station seats (stand and seat positions)
- 2 Compass with compensation, light and protection cover
- 2 Stainless steel leather covered steering wheels with breakes
- 2 Balanced spade rudders bult over stainless steel shaft and auto aligning bearings from JP3
- 1 Emergency tiller

- 6 mm strake teak with black seals
- 1 Stainless steel folding swimming ladder on port, GRP box and cover to integrate the swimming ladder.
- Shower with cold and hot water on port
- 1 Stainless steel hanrail on each side
- 2 GRP engine room hatches with stainless steel ram
- 1 Stainless steel acces for the emergency tiller
- 1 Gangway housing on each side CATANA 65 Custom Carbon – Specifications A-2012 ANG 6
High quality finishing
- Light and rigid panels made in sandwich foam
- Hulls floors in foam sandwich Wengé finish free maintenance
- Cabinetry and inner planking in natural satin varnished oak
- Brushed aluminium decoration stripes
- Isothermal Skaï covered ceilings

Confortable Salon
Located forward platform and featuring a outside panoramic view :
- Cockpit door frame with stainless steel logo « CATANA » (bottom)
- Cushions with high resistance foam and suedine covers
- Salon table with built in bar
- Wet suits locker with drain
- Hifi/TV area (able to fit 42’’ screen)
- Stainless steel hanrails in each hulls steps
- LED lights with dimmer
U-Shaped galley on port, with large sandwich resin countertop Cuisine :
- Numerous storage lockers
- Stainless steel sink (one and half sink) with resin top
- 160 L stainless steel refrigerator KOK Refrigeration system on hull exchanger
- Taps with ceramic seals for haot and cold fresh water
- Vitrogaz 4 burners stove and catalysed gaz oven
- LED lights with dimmer

Charts table
Ergonomic our charts table is think to have all your electronic close to you:
- Removable writing pad with laptop storage under
- Free seat with built in storages, could be use for the salon
- Large electronic free areas
- Electric pannel
- Reading light
Owner’s stateroom
Most spacious and most comfortable one of the boat, located aft starboard :
- 2 Independent slatted bases, on hinges and stainless steel gas ram CATANA 65 Custom Carbon –
Specifications A-2012 ANG 7
- 2 Highly resilient foam mattresses covered Vincenza
- Numerous storages with shelves and drawers under bed
- LED lighting and reading lights above bed
- Hanging locker and washing machine pre equipped area
- Vanity / Desk with settee and separate light
- Sliding door for access to the salon
Large moulded bathroom :
- Shower stall with Teak grating and built-in seat, ceramic seals mixer and Plexiglas door
- Wash basin on sandwich resin countertop
- Mixer tap with ceramic seals for cold and hot fresh water
- Numerous storages for linen and toilet articles
- Blinds on each portholes
- LED lights
Moulded separate toilet:
- Hand basin
- Electric toilet

Guest Cabin
- Double bed convertible into two single berths in the aft cabin
- Double bed in the front cabin
- 2 Independent slatted bases, on hinges and stainless steel gas ram
- 2 Highly resilient foam mattresses covered Vincenza
- Hanging locker and storages with shelves
- LED lighting and reading lights above bed
Guest Bathrooms
- Large moulded bathroom with independent electric toilet and separate shower
- Teck grating and simple basin
- Top storage over the basin with mirror
- Mixer tap with ceramic seals for cold and hot fresh water
- LED lights

Engine room
N°2 Yanmar type 4JH3-DTE diesel engine –
Manual engines controls on starboard helm station
- 2 Temet 25 Ø 40 mm propellers shaft in stern tube through the skegs
- 2 Fix three blades propellers
- 1 Fuel filter / Décanteurs par moteur CATANA 65 Custom Carbon – Specifications A-2012 ANG 8
- 1 Automatic extinguisher 2 Kg ABC each engine room
- Mechanic steering system
- Free area for generator and water maker
- 2 Ceiling lights 24V in each engine room
- Grey paint on the under waterline and ceiling area
- Melamine insulation foam with a thin black PVC skin noir (fire protection: M1) on the engine bulked and wall
between waterline and ceiling
- 2 x 780 L polyethylene diesel tanks with shut off valves and analogic gauge
- 2 x 400 L polyethylene fresh water tanks with analogic gauge at chart table
- 2 Fresh water pump 24 V 50 L/h independent, with temporary tank on each line
- 1 Carbon filter on each fresh water network
- Complete network piping type PER
- 2 x 55 L/220V Isotemp water heater connected on the engines cooling circuit
- 1 x 55 L polyethylene holding tank on the owner’s toilet, with gauge, buzzer and visual alarm at chart table,
gravity drain and vacuum cap. Vent with carbon filter
- Sani marin 24 V toilet in each bathroom
- 1 x 13Kg butane tank (EU appliance) in the cockpit seat locker
- 4 x 24 V 130 L/min automatic bilge pump
- 2 x 45 L/min manual bilge pump

DC made in 24 V and AC made in 220V 50Hz.
- 1 Starting gel batteries 120 AH (maintenance free)
- 6 Main gel batteries 12 AH (maintenance free)
- 1 Low charge alarm Buzzer for the main battery bank at chart table
- 1 Charger 80A for the main batteries
- Numeric Ampmeter and voltmeter
- 2 Alternators 80 A / 12 V for engines
- 2 Extra Alternators 75 A / 24 V for battery bank
- 1 x 220V shore power plug provide with 20m of shore power wire
- 24V DC and 220V AC electric panel, digital ampmeter and voltmeter, diesel/black water/fresh water
analogical gauge and navigation light running feed back
- 7 plugs 220 V inside (2 galley, 1 charts table, 1 owner’s bathroom, 1 each cabin)
- CD-TUNER + 2 inside speakers and 2 outside watertight speakers

The boat is registered under the Italain flag.


Please contact Master User at +385 (0)98 222 949

Interested in this boat? Tel: +385 (0)98 222 949
Visit Website
*This price is based on today's currency conversion rate.
Email Us
Please enter a valid name!
Please enter a valid email address!
RE: Catana 65, Italy
Message cannot be empty!

Tel: +385 (0)98 222 949
Almissani d.o.o.

Marina Drzica 3

Almissani d.o.o.
Please enter a valid name!
Please enter a valid email address!
Message cannot be empty!