2007 Hunter 38
- View Full Specifications
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Sausalito, CA
- Hull Material:
- Current Price:
- US$ 104,000
The Hunter 38 won a coveted Cruising World magazine Boat of the Year Award in 2005 (Best Production Cruiser, under 40 feet; click FULL SPECS above to see full Cruising World review of the 386) and it's easy to see why. She's exceptionally comfortable and functional for a boat this size, both below and on deck: she offers a tremendous amount of space below with two private staterooms, a very spacious salon with 6'5+ headroom, functional galley and large head with separate stall shower.
And topside note the comfortable circular cockpit with walk-through transom, and easy access to side and foredecks...
This particular one-owner, professionally maintained example shows practically bristol--the interior in particular shows almost as new, with gelcoat exceptional as well. She's also the deep draft version (preferable on the Bay), is well equipped from the factory and has an extensive suite of electronics (including color chartplotter, radar and autopilot), a robust offshore dodger and low time on the spotless Yanmar diesel.
Anyway, she's ideal for anything from sailing the Bay to weekending at the dock to cruising down the coast to Catalina and should be considered a must see for anyone looking for a versatile and very competitively priced (now one of the keenest priced in the entire U.S.) all-'rounder...
Price significantly reduced early fall 2019, out-of-state owner is DONE and offers encouraged!
Please contact Mark Cattell at 415-331-6200
Additional Specs, Equipment and Information:
Designer: Glenn Henderson
LOA: 38 ft 3 in
Beam: 12 ft 6 in
LWL: 32 ft 6 in
Maximum Draft: 6 ft 5 in
Displacement: 15250 lbs
Ballast: 5500 lbs
Bridge Clearance: 59 ft 5 in
Total Power: 40 HP
Engine Brand: Yanmar
Year Built: 2007
Engine Model: 3JH4E
Engine/Fuel Type: Diesel
Engine Hours: 749
Engine Power: 40 HP
Cruising Speed: 6 mph
Maximum Speed: 8 mph
Fresh Water Tanks: (75 Gallons)
Fuel Tanks: (30 Gallons)
Number of heads: 1
Guest suite with V-berth and ensuite sink forward with pass-through to salon next aft. Salon has L shaped dinette starboard with straight settee and nav table port.
Continue aft to J-shaped galley starboard, head with separate shower port which accesses beam-to-beam master stateroom aft with athwartship queen berth. Master also accessed starboard side aft of galley.
Note teak interior looks and smells new, 6'5 headroom, teak & holly sole, tastefully decorated in muted off white.
Twin deep stainless steel sinks with designer one-touch faucet and Corian countertops, Force 10 gimballed three burner propane stove with oven, built in Origo microwave oven, top-loading refrigerator with separate freezer compartment, built in trash can. Bemis electric fresh water flush head.
Electronics and Navigation Gear
Full suite of Raymarine electronics: C80 color chartplotter with radar overlay at helm and RN300 chartplotter at nav table, ST6001 autopilot, wind speed/direction indicator, knot meter, depth sounder. Icom VHF radio, Danforth compass. Sharp Aquous flat panel tv/dvd player, Sony AM/FM/CD player.
110V AC / 12V DC. Thirty amp shorepower service, Xantrex inverter/charger, three 12V batteries in two banks with parallel switch.
Sails and Rigging
Fractionally rigged 110% jib on Furlex roller furler, Dacron in-mast furling mainsail, Selden aluminum mast with double swept back spreaders (Hunters trademark B&R rig), Selden rigid vang, Harken mainsheet and traveller attached to stainless steel arch over the cockpit which also incorporates the bimini top. Three #40 Lewmar self tailing winches, single #44 Lewmar self tailer, all lines lead aft through eight labelled Spinlock rope clutches, inboard adjustable jib cars.
Deck and Hull Equipment
FRP hull with balsa-cored sandwich above the waterline and solid glass with Kevlar reinforcements below, lead deep fin keel and oversize rudder, bottom just painted June '08.
Robust dodger with side and back grabrails, heavy duty bimini top over cockpit, stainless steel stanchions with double lifelines, walk-thru transom with hot/cold shower, outboard sternrail "catbird seats". Canvas color is dark blue.
Plough anchor with ample chain and line rode, Simpson-Lawrence electric windlass.
Engine and Machinery
Yanmar three cylinder fresh water cooled diesel engine.
Cruising World Review from June 2005
As we stepped aboard the new Hunter 38 last fall in Annapolis, something seemed different. At first glance, all of Hunter's trademark details were there: the stainless-steel arch that carries the mainsheet traveler, the comprehensive bimini, the corner seats in the stern rail. Yet the hollow waterlines and fine bow sections indicated that designer Glenn Henderson and his team had refined the Hunter hull form to bring out more pep and agility. Henderson's written brief for the boat describes a "very responsive and maneuverable yacht that would be very forgiving to sail in a breeze and easy to maneuver in close quarters such as docking." He highlighted two performance-related objectives: to minimize the pitching motion and improve boat speed in midrange conditions, and to boost the boat's pointing ability with a low-drag keel and a large rudder that helps generate lift. All these attributes needed to be wrapped into a package that offered exceptional comfort and easy handling and that was suitable for shorthanded sailing and for newcomers who might like to explore Catalina, Martha's Vineyard, or the Bahamas.
Cruising World's Boat of the Year judges immediately picked up on the look and feel during the dockside inspection, which revealed well-conceived ideas and good execution, all focused on the purpose of the vessel and the target audience. "I'm more impressed with this than with any other Hunter I've seen," said Steve Callahan, a BOTY judge whose career background includes boatbuilding and yacht design.
Hunter builds the hull with balsa-cored sandwich above the waterline and solid glass with Kevlar reinforcements below. It's a cost-effective and proven method that keeps weight down and increases impact resistance where it matters. The deck is bonded to the hull and through-bolted on an outward flange. Hunter protects the hull/deck joint from bumps and bruises with a stainless steel-capped vinyl rubrail. The lead/antimony keel is connected to the structural hull grid with stainless-steel bolts. The test boat had the shallow-draft version, with a bulb that keeps the center of gravity low without creating excessive drag. Augmenting the efficiency of the lateral plane is a large, balanced spade rudder that has a composite stock.
Hunter continually talks to its customers; based upon those conversations, comfort, low maintenance, and ease of use figure prominently on its boats. Molded-in nonskid surfaces on deck are complemented by low-maintenance Flexiteek surfaces on the cockpit seats. Precut into sheets and precaulked, this material might not meet the aesthetic standards of dyed-in-the-wool traditionalists, but it's easy to replace at the end of its useful life, which, according to Hunter, is expected to be about 15 years.
What registered with the BOTY judges was Hunter's attention to important details, which put the 386 a step ahead of other boats in the same category. "The chocks and cleats were fine, the emergency steering was very functional, deck flow and handholds were good," noted BOTY judge Alvah Simon. "The anchoring drills went very well. The 386 has twin rollers that can both be used, and everything worked properly. There was a cleat behind the fairlead of the port roller and a pin placement on the roller; you can quickly lock down the anchor until everything's set up right. The well was good, and the electric windlass had up/down switches, which you don't expect in this price range."
As with other Hunters, the integrated stainless-steel arch and bimini over the cockpit is a defining trait. While the judges felt that mounting the traveler track on top of this arch removed clutter from the cockpit, they all agreed that the canvas bimini could be improved with more see-through panels to give a better view of the sails.
Aside from this issue, which also surfaced on several other boats, the cockpit was a good workplace, once one got used to the concept of reaching up for traveler adjustments. Kibitzers sat in the corner seats on the stern rail, watching the skipper work the Lewmar folding wheel and the crew trim the sails at the self-tailing winches. The primaries were mounted well aft, so the cockpit layout satisfied an important requirement for safe shorthanded sailing: easy access to the sheets for the person at the helm so he or she doesn't have to step away from the wheel to execute a tack or an emergency maneuver.
Making his way into the saloon, judge Bill Lee noted that the first step of the companionway was deep, well sized, and properly surfaced with nonskid. "A big top step is really nice because people like to stand in the hatch," he said.
Belowdecks, the emphasis on practicality and comfort is evident in the laminated Everwear teak & holly-look alike sole, which is designed to withstand abuse much better than actual teak & holly, and without fuss or varnish. Headroom in the main saloon is a generous 6 feet 6 inches. On the inside of the cabin top, Hunter uses a light headliner that offers easy access to deck hardware and wiring and helps keep the center of gravity low. The living space is divided between the dinette to starboard and a settee to port, ahead of the forward-facing nav station. BOTY judges noted that the saloon table lacked fiddles, but the separate stall shower in the head to port of the companionway drew praise. Lee, a noted yacht designer in his own right, pointed out that in this size of boat, designers usually have to make a choice: "It's either a forward-facing nav station, in which case the skipper wins," he quipped, "or it's a separate shower stall, in which case the first mate wins. Here, both of them win."
Both settees in the saloon can be converted into sea berths, at least in theory. The L-shaped galley to starboard pleased judge Tom Prior, who has a background in professional food service: "This is one of the few smaller boats we saw that had two stainless-steel sinks. I think that's real positive." Still, he would have preferred a properly gimbaled three-burner stove instead of the two-burner model installed on the test boat. He appreciated the easy access to the bronze through-hulls under the galley floorboards. "They're all in one compartment and have proper labels," he said. "If you hear water sloshing in the bilge, you look here first to see where it could be coming from."
The master cabin in the owner's version is aft, dominated by an athwartship double berth, two lounge seats, and private access to the head and shower. Hunter also offers a three-cabin layout with two staterooms aft. Bill Lee was smitten with this part of the boat. "The aft cabin was very well-done for a 38-foot boat," he said. "I liked the passageways on both sides because such an arrangement it really helps the ventilation."
Peeking underneath the floorboards, he noted something else: "The engine has the old-fashioned shaft drive with the old-fashioned stuffing box, which is much easier to repair than a saildrive."
The positive impression the judges had of the Hunter 38 at the dock was reinforced when the time came to take a spin on Chesapeake Bay. The test boat had three of what Bill Lee calls "performance inhibitors": a 5-foot shallow-draft keel, a fixed three-bladed propeller, and an in-mast mainsail furling system. And yet, under the three-point Bergstrom & Ridder rig the boat moved at a good clip on all points of sail, even in light air. "Hunter is really consistent with this concept," Steve Callahan said of the mainsail-driven rig featuring swept-aft spreaders and a small blade jib. "It's good for Hunter's envisioned customers, including sailing couples and novices, who benefit from the easy handling of a small headsail." Callahan also praised the feeling at the helm. "The boat performed extremely well under main alone, and it also was incredibly maneuverable."
During a chance encounter with a J/80 that sailed along behind us, he noted that we were "doing basically the same speed." Measured speed over ground averaged 4.5 knots under main alone, 5.8 knots closehauled with a headsail, and close to 7 knots on a beam reach, all in about 10 knots of true wind. And under engine alone, the boat kept up its good manners and maneuverability. With the optional 40-horsepower Yanmar, it managed an average speed over ground of roughly 6.5 knots at 2,500 rpm and 7.2 knots at 3,000 rpm.
In the end, the hunch about the Hunter 38 proved to be correct. Hands down, the boat convinced the judges that it was the unanimous choice to win the class of production cruisers under 40 feet. It did it with better-than-expected performance, good design ideas, and follow-through in their execution. "Hunter is getting better design, better construction, and has price control," Alvah Simon said in summary. "I enjoyed sailing the boat, and I think other people are going to as well."
Cruising World, June 2005, Dieter Loibner
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
cheap and easy