2001 Trawler Custom Smart Trawler
cheap and easy
- View Full Specifications
- Engine/Fuel Type:
- Located In:
- Halifax, NS
- Hull Material:
- Current Price:
- Can$ 449,000 (US$ 334,191)
BUILT BY SOME OF CANADA'S FINEST - STEEL HULL & ALUMINIUM SUPERSTRUCTURE - CUSTOM BUILT AND READY TO CRUISE THE WORLD
The Smart Trawler is a full displacement motor cruiser based on successful traditional North Atlantic working craft hulls. It is designed for unrestricted ocean use and extended offshore cruising. The vessel is built to ABS and Lloyds scantlings with a steel hull construction and aluminum superstructure. It meets applicable ABYC standards. The Smart Trawler provides sea kindliness, handling ease, easy maintenance and operational economy.
Hard chines and a substantial keel minimize roll and a bulbous bow reduces pitching and improves fuel efficiency. Two longitudinal fuel tanks keep the weight low while minimizing free surface effect providing a more comfortable and stable ride. Optional stabilizers can be added.
The vessel is subdivided in four compartments by three water tight transverse bulkheads; a collision bulkhead isolates the forepeak, a bulkhead with a water tight door separates the lower accommodation area from the engine room, and a bulkhead with a water tight door isolates the lazarette.
The vessel is powered by a 360 bhp, Series 60 Detroit Diesel with a ZF 350-A reduction gear. The engine is electronically controlled and meets strict emissions standards while extending a high level of fuel economy. The vessel’s hydraulic system is driven off the main engine gearbox and powers the bow thruster and windlass and provides two additional hydraulic ports for equipment such as davits and stabilizers. All equipment and hardware were selected to be tough, reliable and readily available.
The engine room is large and well laid out with easy access to all equipment and systems. The pilot house is spacious and provides all around visibility. Weather tight Dutch doors in the pilot house further improves visibility during docking maneuvers as well as providing excellent ventilation. The wide walkaround decks are uncluttered and well protected. Safety is a foremost design consideration.
The boat is heavily insulated throughout for thermal as well as acoustic benefits. There is an aluminum deck head in the engine room and a second deck under the salon/galley. This provides a dead air space and heavy insulation between the machinery and accommodation areas which mitigates noise and provides fire protection equivalent to that found on commercial passenger vessels.
Bulwarks are plated inboard as well as outboard which gives a clean profile and eliminates high maintenance stanchions and framing. All windows and exterior doors are coast guard approved for offshore applications. Interior partitions are constructed of 1" x 2" steel supports and sheathed with marine grade plywood and high quality laminates. Cabinets and interior joinery are constructed from indigenous hardwoods and have a natural finish.
Please contact Jordan Zelt at 705-427-9025
Additional Specs, Equipment and Information:
LOA: 52 ft 10 in
Beam: 16 ft 3 in
Bridge Clearance: 24 ft 0 in
Number of heads: 2
Custom Trawler - Ready to Cruise the World
Length overall (w / swim platform): 15.90 m (52.10 ft)
Length at waterline with swim platform: 14.13 m (46.35 ft)
Length at waterline without swim platform: 13.33 m (43.73 ft)
Beam: 4.97 m (16.30 ft)
Draft: 1.60 m (5.25 ft)
Air Draft (approx.): 7.40 m (24.00 ft)
Displacement (light ship): 35 tons Gross registered tonnage: 47.97 tons
Net registered tonnage: 35.98 tons
Fuel capacity: 4000 L (1057 US gal)
Fresh water tank: 900 L (240 US gal)
Hot water tank: 75 L (20 US gal)
Sewage holding tank: 150 L (40 US gal)
Grey water holding tank: 235 L (62 US gal)
LPG tanks (2): 40 lb (18 kg)
Engines & Mechanical:
Single Detroit Diesel 60 Series
HP: 360 Horsepower, electronically controlled,
Vessel View: Electronic engine display with numerous alarms and data readouts,
Kobelt single lever mechanical shift/electronic throttle controls
Fresh water keel cooling with Fernstrum Gridcoolers,
Racor 75/900FG x 2 fuel filter/water separators,
Dual action anti-vibration engine mounts.
Transmission: ZF IRM 350-A (2:1 ratio) with live PTO hydraulic pump for windlass and bow thruster.
Propeller: High Torque, 4 blade, 32" x 29” Prop shaft: 2.5 inch, 316 S/S.
Rudder and shaft: Stainless steel.
Shaft seal: Duramax Marine Shaft Seal - mechanical, drip-less.
Coupling: Drive Saver model 8010Z.
Bow thruster: Key Power, 12" HD, hydraulic, 38 hp.
Steering: Kobelt manual hydraulic system with rudder angle indicator, Destroyer 18" wheel.
Windlass: Maxwell model HWC3500-HYD, hydraulic with deck mounted foot operated electric controls
Davit: Atkins & Hoyle model 6500T, rotating, 24V, 650 lb capacity
VHF radios: 1-ICOM IC-M45A , 1- ICOM IC-M59, 2 - Shakespeare style 5202 - 8 ft VHF Marine Antennas.
Radar: Raytheon Pathfinder 24", 4 kw Scanner with HAB. Series CRT Display. GPS/Plotter: Raytheon Raynav 300 GPS Plotter, serial port connection for PC computer or chart plotter.
Auto Pilot: SIMRAD Robertson model AP20 Autopilot,
RFC35R Rate Compass,
RPU Reversible Pump 160.
Depth sounder: JRC FF30 Color Sounder/Fish Finder.
Horn: 24V air horn.
Compass: Ritchie Navigator DNP-200 with night light.
Navigation lights: PB Yacht Lights.
Clock/Barometer: Chelsea Maritime.
The vessel has a 24V DC system with separate battery banks for ship services and engine starting. DC power is supplied by a 100A alternator on the main engine and a 65A battery charger. A 24V to 12V power converter provides power to the VHF radios, the depth sounder, a power outlet in the pilot house and some instrument lighting. AC power is provided by a 20 KW diesel generator. A 240V, 50A shore power service feeds a 15 KVA isolation transformer and 120V/240V power is available on the vessel. The air conditioner, water heater, bilge pump and other heavy loads are 240V. A 2500W inverter provides 120V power to separate AC outlets and the engine room lights so that if high load AC equipment is inadvertently left on it will not drain the batteries. When AC is available to the inverter it bypasses up to 30A to the output rather than drawing power from the batteries.
Generator: Northern Lights, model M844LK 20 KW (83.3A @ 240V) with sound enclosure, remote control panel in pilot house (Lugger 32 hp marine diesel, 1.7 gph at full load, wet exhaust).
Shore power: 220V, 50A shore power service with an isolation breaker and a 15 KVA Delta isolation transformer, Hubble connectors and 50 ft. power cord.
Alternator: 24V 100 amp.
Services batteries: 2 - 12H - 8D, 221 amp hours, 489 reserve minutes, 1150 cold cranking amps.
Starting batteries: 2 - 8D-1250, 1250 cold cranking amps.
Generator battery: 1 - 4D - 1000, 1000 cold cranking amps.
Battery switches: Perko heavy duty.
Battery boxes: Blue Sea System.
Battery combiner: Heart Interface PathMaker model 100 AMP Two with remote control.
Main electrical panel: Paneltronics, 100 AMP DC main breaker, 24V DC double pole breakers, 250 AMP fuses on main 24V supply cables, 50 AMP AC main breaker for shore power, 100 AMP main breaker for generator, analogue voltage and current meters. Charger/invertor: Heart Interface Freedom 25 Combi Inverter/Charger, 2500 Watt (5200 watt surge),
3-stage 24V, 65 Amp battery charger,
30 Amp AC automatic transfer switch, remote monitor in pilot house.
Power converter: Newmar model 48-12-18I, 12V, 18 AMP power supply for selected electronics.
6 Flood light: Hella 24V.
Search light: ACR Electronics model RCL-100D (dual bulb, 24V), remote controlled with point pad.
Wipers: 3 - Wynn model M30, 24V with auto park.
Engine room blower: Delta T Systems, Inc., 11" Axial Fan, 24VDC.
Engine room fans: Delta T systems, Inc., 9" Axial Fans, 24V.
Lights/outlets: 24V & 110 VAC lighting throughout,
GFI outlets in galley and heads,
GFI outlet on aft deck,
12V outlet in pilothouse,
24V exterior deck lighting,
120V engine room outlet.
Wiring: ABS and Coast Guard approved Shawflex marine cable.
The Smart Trawler features an upper level salon, galley and pilot house and lower accommodations with a master stateroom, double cabin, and a workshop/office area. The interior features the Mediterranean layout with a curved stairway from the pilot house to the accommodation. The workshop/office area can easily be converted to a third cabin with several layout options. One head with shower is located between the master stateroom and the double cabin with access to it from the central hall. A second head with a shower can also be installed. The head features a Vacuflush toilet, sliding shower door, Surell vanity top and ample storage cabinets under and behind the vanity. The salon has a U shaped settee and a spacious U shaped galley area. There are ample cabinets in the galley, Surell counter tops, a S/S double sink, an LPG stove with an oven, a fridge/freezer, and microwave. Lined curtains cover the windows in the salon and the port lights in the lower accommodations. The pilot house is on a higher level than the salon to allow for 360 deg. visibility. The interior has air conditioning and electric heating. The cabinets and interior joinery are all solid wood (maple) or premium grade plywood. Walls and ceilings are covered with laminate veneer over plywood. The ceiling of the pilot house has a textured metallic surface to reduce reflections and provide good light distribution. Hanging lockers are located in the staterooms and the salon area.
Fridge/Freezer: Nova Kool model RFU 8000 PS220, 220V/24V automatic switch over.
Stove: Seward model 3372-1002, 3 burners, LPG, with oven and s/s top, LPG solenoid with remote panel,
2 x 40 lb aluminum LPG tanks.
Air Conditioning: Flagship Marine model FMAC16R (2 units) and FMAC9R (1 unit) with built in 2KW electric resistance heating elements.
Helm seat: Tracy, model 2005-5BE.
Berths: Double bed with a spring-filled mattress in the master stateroom, high density foam mattresses on single berths.
Decks/soles: Cabin soles are longleaf yellow pine in the salon and staterooms.
Industrial rubber is used in high traffic areas such as the galley, pilot house and lower level hall.
The deck in the head is nonslip ceramic tile.
Hull and decks: Class approved steel for plate and structural components,
Hull - 3/16 in. plate,
Bow section ice shield - 1/4" plate,
Keel - 3/8" plate, keel shoe - 3/4",
Insert plates behind grid coolers and above propeller - 3/8",
Frames and bulkheads - 3/16 in.
Bulbous bow: 7/16" steel with 3/16" domed stainless steel bow cap.
Superstructure: 3/16" 5083 aluminum plate, 6061-T6 for frames and structural components.
Aluminum superstructure is welded to the steel hull with DYNACLAD explosion bonded bi-metal transition joint material between the components.
Exterior doors: Beclawat, aluminum weld-in with large windows, sea dogs, Dutch doors in pilot house.
Windows: Beclawat, aluminum fixed non-opening.
Heavily constructed bolt-on types used on front of pilot house.
Portlights: Stainless steel, opening type with screens.
Hatches: Freeman, aluminum hatch provides access to fore peak, engine room and deck locker.
Hatch on escape way from lower accommodations with sky light.
Hand rails: Main deck - 1.25" dia S/S welded to bulwarks, cabin top - 1.25" dia aluminum welded to deck.
Insulation: All exterior surfaces accept engine room - 2" rigid spun glass Paroc marine insulation + 1" rigid spun glass Paroc marine insulation + complete foil vapor barrier with air gap adjacent to steel hull surfaces for moisture drain.
4 Fuel tanks: Two integral steel tanks in the engine room, baffles, three large (400 mm x 500 mm) bolt-on access covers on each tank, 2"dia vents with anti-flood device.
Deck features: Walk-around deck, large open foredeck, large storage locker on foredeck for LPG, fenders and lines,
S/S chocks, cleats and fairleads.
Swim platform: Steel, integral with hull.
Engine room deck: Composite grating with nonskid surface.
Finish: Complete paint/corrosion protection system. All steel has been wheelabrated and primed with a weldable primer, Ameron Dimetcote 225". All welded joints blasted and primed after welding. Interior steel surfaces covered with 4 coats of Ameron Bar-Rust 235. Ameron, Amercoat 5401 Alkyd enamel topcoat then applied to exterior of the hull and superstructure. Amercoat ABC#4 anti-fouling paint applied to the bottom. Zinc anodes bonded directly to the hull. The exterior decks have a non-skid surface applied.
Plumbing System All piping, hoses, pumps, valves and related equipment were selected to meet professional standards. As per classification society standards, all hoses which present a flooding hazard are fastened with dual 316 S/S clamps and all thru hull fittings are bronze or S/S and have both seacocks and back flow check valves. All seawater intakes are connected to a sea chest which has a S/S strainer that is easily cleaned while underway. The potable water tank is S/S with the fill pipe located high above deck level to minimize the opportunity for contamination from dirt or seawater. All water and waste tanks have tank level gauges with the display units in the pilot house. The vessel has a hot and cold pressure water system, a S/S grey water holding tank with pump and overboard discharge and fresh water Vacuflush toilets.
Pressure water system: Paragon-Model PSR Senior 24V automatic pressure pump, GROCO model PST- 5 storage tank.
Hot water tank: Torrid, model MV-20- 240V, 3000 watt with engine heat exchanger.
Grey water pump: Jabsco model 37202 diaphragm pump with Pumpgard strainer, 24V, 4.5 GPM, overboard discharge.
Bilge pumps: 1- Pacer 2 in, 240V electric bilge pump. 1- Jabsco 1.5 inch engine driven bilge pump with 24V clutch.
Head: SeaLand Model 806 Vacuflush Toilet (fresh water),
SeaLand vacuum generators,
40 US gal. Holding Tank (117 flushes) with overboard discharge and pump out connections,
Tankwatch 4 level monitor system.
Safety Life raft: Viking 6 man, Type 6 DK+ with type A Emergency Pack.
Misc: Life jackets, life ring, MOB lights, Fire extinguishers, Smoke alarms, Rescue/swim platform, Engine room fire smothering system.
Bruce 30 kg anchor with 400 ft of hot galvanized G-30 chain,
Double S/S anchor rollers,
Boat hook, Dock lines, Fenders.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from United City Yachts Inc.
CBEC Steel Trawler
Sault St. Marie, ON, Canada
Whittholz Europa Sedan