1995 Sabre 362

Additional Specs, Equipment and Information:

Boat Name
Capella

Specs
Designer: Jim Taylor and the Sabre Design Team
Keel: Fin
Hull Shape: Monohull

Dimensions
LOA: 36 ft 2 in
Beam: 12 ft 0 in
LWL: 30 ft 5 in
Maximum Draft: 6 ft 6 in
Displacement: 13800 lbs Dry Load
Ballast: 5520 lbs
Headroom: 6 ft 4 in
Dry Weight: 13800 lbs

Engines
Total Power: 32 HP

Engine 1:
Engine Brand: Westerbeke
Year Built: 1995
Engine Model: 35B
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: 3 blade propeller
Engine Power: 32 HP

Cruising Speed: 6 knots
Maximum Speed: 7 knots

Tanks
Fresh Water Tanks: 2 (78 Gallons)
Fuel Tanks: 1 Aluminum (34 Gallons)
Holding Tanks: 1 (30 Gallons)

Accommodations
Number of single berths: 7
Number of heads: 1

Manufacturer Provided Description

Easily managed by two, the Sabre 362 is designed for high-performance luxury cruising. The hull design is a blend of Sabre's performance design concepts, proven in transatlantic passages and offshore racing, together with the latest developments in yacht design technology. Her powerful sail plan gives excellent light-air speed.

On deck the Sabre 362 features a new generation of styling harmony which evolved from the detailing of the Sabre 38 and Sabre 425. Her cockpit incorporates advanced ergonomics for comfort on extended passages. Self-tailing genoa winches are located close to the helm for convenience and ease of sailing. Every Sabre incorporates the best hardware: Edson, Hall Spars, Harken, Lewmar and Westerbeke to name a few.

The Sabre 362, like all Sabre hulls and decks, is built to withstand the rigors of the sea. Safety and structural integrity are put first in the construction by alternating layers of hand laminated fiberglass mat and knitted roving. Balsa core is used as a stiffener in areas of high stress. Hull durability is increased by incorporating vinylester resin and ISO NPG gelcoat into the DuraLam protection system.

Belowdecks, the generous beam of the Sabre 362 gives her a very spacious and open plan. Her forward stateroom is especially large with a full-width double berth and a convenient vanity sink unit.

The main salon has a full width table that folds against the bulkhead when not in use. The chart table has ample lockers for recessed navigational instruments. There is exceptional storage in her L-shaped galley in the many drawers and lockers. The molded fiberglass head features a contemporary island sink, a separate shower stall, and a wet locker for foul weather gear. Her finely hand-crafted and varnished joinery gleams in either teak or cherry.

PHRF Handicap (Average): 108

Accommodations (*Sabre 362 Brochure)

An Inviting Main Salon

Few sailing yachts are built to as high a level of fit and finish as the Sabre 362. Woodworking details, rarely found in even high priced custom yachts, abound in her luxurious interior. Dovetailed drawer boxes, louvered cabinet doors and beautifully sculpted laminated trims, demonstrate Sabre's skills and commitment to quality craftsmanship.

To port is an aft facing chart table at the aft end of a 6'4" long settee. Ample space is provided for today's sophisti- cated navigational electronics. To starboard is an L-Shaped settee with fold up, bulkhead mounted table. When opened, the leaf reaches to the port settee creating a large table for all the crew and guests. With the table folded up on to the bulkhead the salon becomes a large and comfortable space in which to socialize or to relax with a good book.

The owner’s stateroom features a large vee-berth, and a vanity sink with wood framed mirror and seat. To port is a large cedar lined hanging locker. A deck hatch and two opening ports provide light and air to this comfortable space.

The private aft cabin provides a comfortable space beneath the yacht’s cockpit sole. Storage spaces are found here for all of the gear that you and your crew have brought along. A cedar-lined hanging locker is another reminder of the quality of this yacht's fit and finish.

The Sabre 362 offers a spacious head with separate shower stall. This is a one- piece fiberglass unit which is both practical and easy to maintain. A bi-fold door separates the shower from the head compartment (see photos). A cedar-lined hanging locker is another reminder of the quality of this yacht's fit and finish. 

Galley

The galley is well designed for an active cruising family. A double stainless steel sink with single lever mixing faucet is situated close to the centerline, so that it remains useable while underway. A deep and well insulated ice box is found outboard of the sinks and a front open- ing door is available as an option. There is ample space for your stores outboard and above the counter. A propane stove and oven with stainless steel safety bar is located at the aft corner of the galley space.

Sails and Canvas

#1 Racing Genoa (Non-Roller)

#2 Genoa Roller w/Sunguard

Mainsail w/2 Reefs and Foot Shelf

Dutchman Flaking System (Added 2018)

Storm Tri-Sail

Storm Jib

Mainsail Cover

Cockpit Dodger

 

Electronics

Electronics:

• Raytheon R10XX Radar w/Radome on Mast (Cockpit Display)
• Raytheon Raychart 600XX
• Autohelm ST4000 Autopilot
• Autohelm ST50 Plus Wind System (Cockpit)
• Autohelm Nav-Data Pluse Display (Pedestal)
• ST50 Plus Multi-Function Display in Cockpit
• ST50 Plus Multi-Function Display at Nav Station
• ST50 Plus Boatspeed System in Cockpit
• ST50 Plus Depth System in Cockpit
• Autohelm Z130 Fluxgate Compass (for Autopilot)
• Raytheon Nav 398 Display at Nav Station
• Autohelm Nav-Data Plus Display at Pedestal
• Standard Omni VHF Radio
• Metz Antenna at Masthead clear of Burgee
• AM/FM/CD Stereo-Jenson CD5100
• Cockpit Speakers-Pioneer TS-MR165's
• Cabin Speakers-Pioneer TS-MR 165's
• Tri-Color w/Strobe Light
• Windex

Recent Upgrades

-          Replace bilge alarm

-          Varnish – every year, two coats

-          New nav pod / electronics at helm – Raymarine E125

-          H2O filter – install

-          New head – install

-          CO2 / Propane detector – install

-          Dutchman system on main – install (2018)

-          Soda Blast bottom – 4 barrier coats / 2 top coats of bottom paint (2019)

NOTE:  The onboard heater is no longer functional.  Likely just needs repairs but the owners never needed or used it.

Factory Upgrades

Factory Upgrades:

General:

Double Boot Top and Cove Stripes

Contrasting Non-Skid Decks

Accordian Curtains

Varnished Cabin Sole

Varnished Teak Interior

Hull:

Propane Stove

Y-Valve and Macerator for Head

Front Opening Ice Box

Hot and Cold Cockpit Shower

Galley Counter Extension Leaf

Ritchie SP5 Compass

Teak Access Door to Starboard Settee

Teak Access Door to Starboard Scupper Seacock

Enlarge Head Hanging Locker

Mast and Rigging:

Performance Packag w/Carbon Fiber Spinnaker Pole

Single Backstay w/Step Transom

Flag Halyard

Spreader Halyard

Rod Rigging

Extend Spinnaker Pole Track to 1st Spreader

Second Genoa Halyard led Aft

Harken Roller Furling w/Split Drum

Deck Options:

Additional Deck hatches-Opening Aft

Chrome Dorade Vents

Double Stopper at Pos. #10

Triple Stopper at Pos. #4

Outhaul led Aft with Stopper

Foreuy Led Aft to Pos. #4

All deck winches upgraded to self-tailing:

     -44AST Spinnaker Winches

    -48AST Primaries

    -30AST Mainsheet

    -24A Jib Halyard

    -30AST Topping Lift

    -30AST Main Halyard

    -30AST Spinnaker Halyard

Harken Adjustable Genoa Tracks (Adjustable Under Load)

Divided Anchor Locker

Electrical Options:

Three Cabin Fans

12V Outlet in Cockpit

90 Amp Alternator

Adler Barbour 12 Volt Refrigeration System

 

 

 

Electrical

BASS AC/DC Control Panel

DC Standard Features:

• 12VDC
• Branch Breaker Capacity: 19: Installed-14
• Voltmeter 8-16 VDC Expanded Scale
• Battery Monitor Switch: 3 Banks
• Ammeter: 50 Amp DC w/Patented In-Line Shunt
• Ground Bus
• Shore Power LED Indicator Lights
• Branch Breaker Capacity: 8; Installed-5
• Voltmeter: 150 VAC
• Ammeter: 50 ACAC
• Neutral Bus: AC Grounding Terminal

 

 

 

Propulsion

Westerbeke 35B Inboard 32hp Diesel

3-Blade Feathering Maxprop

Sail Area

IJPE : 634.50 sq ft
I : 48.50 ft
J : 13.42 ft
P : 41.58 ft
E : 14.83 ft
Working Sail Area : 634.00 sq ft

Comments

This is one of the finest and best equippled Sabre 362's on the market.  Her original owners have always kept her professionally maintained by one of the finest yards in New England including storing her indoors during winter.  

Highly recommended to those seeking exceptional quality and performance.

Safety Equipment

• Lifesling
• Radar Reflector
• Compass
• 35 LB. CQR Anchor w/Chain and Rode
• 21 LB. Fortress Anchor w/Chain and Rode
• Docklines
• Fenders
• Weems and Plath Atlantis Brass Clcok
• Weems and Plath Atlantis Barometer
• Liferaft

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.