1990 Little Harbor 54
- View Full Specifications
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Portsmouth, RI
- Hull Material:
- Current Price:
- US$ 389,000
As the only aft-cockpit Little Harbor 54 built, MISTY is a rare offering in today’s brokerage market. In addition to an extensive list of standard Little Harbor amenities, this luxurious bluewater cruiser offers electric sail handling, bow thruster, generator, inverter, water maker, air conditioning and Espar heat. True to the Hood design philosophy, moderate displacement, a low-wetted-surface-to-sail ratio and a tall rig provide impressive light air speeds and momentum, as well as powerful and comfortable heavy air performance. The full hull shape also lends itself to superior weight tolerance. Thus, loading the yacht with cruising equipment and provisions tends not to reduce performance.
On deck, MISTY features a huge cockpit with a fixed drop-leaf table for six, standing headroom below a large dodger and easy access to below via hinged raised-panel doors. A custom-designed molded GRP steering pedestal houses a Ritchie 6" compass, all engine instrumentation and controls for a 10” Garmin color chartplotter, remote ICOM VHF and bow thruster. All sail-handling controls, sheets and winches are within easy reach of the helmsman, as are the two separate auto-pilot systems. Built-in lockers for storage of rope tails are located in the cockpit combing.
The interior is finished in the Herreshoff style, which accentuates the feeling of openness in a cleverly-arranged open-plan salon, galley and navigation area. The master stateroom features a centerline queen-sized berth, a desk/vanity and an ensuite head with separate stall shower. The guest stateroom also has a queen-sized berth and ensuite head and shower, plus wet hanging locker.
MISTY has enjoyed knowledgeable and caring owners since her conception. Careful and generous maintenance, constant upgrading and relatively light use (the yacht was stored inside for approx. 2-½ years) make her a truly remarkable offering.
WELLINGTON YACHT PARTNERS -- BROKERAGE OFFICES: Portsmouth, Rhode Island; Portland, Maine.
Chris FAIRFAX, Chet HARTSHORN, Bill HAYNIE, Ted HOOD, Murray LORD, Bob MARSTON, John PERKINS, Jim WETHERALD.
Please contact Wellington Yacht Partners at 401-683-6070
Additional Specs, Equipment and Information:
Builder: Little Harbor
Designer: Ted Hood Design Group
Flag of Registry: United States
LOA: 53 ft 5 in
Beam: 15 ft 1 in
LWL: 42 ft 9 in
Minimum Draft: 6 ft 0 in
Displacement: 50000 lbs
Ballast: 18500 lbs
Bridge Clearance: 70 ft 5 in
Total Power: 100 HP
Engine Brand: Westerbeke
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 3130
Propeller: 3 blade propeller
Engine Power: 100 HP
Cruising Speed: 7 knots
Maximum Speed: 8 knots
Fresh Water Tanks: Fiberglass (380 Gallons)
Fuel Tanks: Fiberglass (200 Gallons)
Number of heads: 2
Electrical Circuit: 12V
Total Liferaft Capacity: 6
HULL and CONSTRUCTION
The hull is molded in GRP from female molds with 3/4" Airex foam core for added strength and sound/thermal insulation. Vinylester resin is used on the exterior skins for the highest possible resistance to osmosis, plus epoxy bottom coating with Interlux 2000 system. Airex core material is eliminated in areas of sheerline, centerline, ballast, rudderpost, hull ports and through-hulls, with solid GRP lay-up in these areas. There is a painted teak rub rail with stainless steel striker for topside protection in docking situations.
The deck is hand-laid teak over GRP, with Divinycell H-80 foam core for strength and stiffness. In areas where deck equipment is installed, core is replaced with Divinycell H-200 high-density foam. Outer skin is built to 1/4" thickness, inner skin to 3/16". Cockpit sides and coaming are solid fiberglass. Deck flange is solid glass to approximately 3/8" thickness. The deck is bonded with epoxy putty to the inboard angled hull flange and bolted with 5/16" bolts on 8" centers. Additional fastenings are provided with a teak toe rail through-bolted on 8" centers. All deck hatch landings are molded in GRP. There is a flush lazarette hatch with molded drain channels. The propane locker is molded seperately into the cockpit combing and ventilated with direct drain overboard.
The rudder blade is molded around a stainless steel frame welded to the rudderstock and supported by upper and lower bearings. Rudder removed and inspected, post faired, and re-installed (2019). A bronze stuffing box is provided with Teflon impregnated packing. The weighted centerboard is molded GRP with bronze shoe.
- Integral molded fiberglass fuel and water tanks and centerboard trunk
- Internal cast lead ballast
- Varnished teak exterior trim
- Hull finish is “Stars & Stripes” Blue Awlgrip topsides (2013) with gold cove stripe, white boot and black bottom.
Centerboard configuration offers minimum draft of 6' with board up and a maximum draft of 12' with board down.
All cabins are finished in the Herreshoff style with white painted bulkheads and cabin trunk and exquisitely milled teak trim, rails, doors and drawers. There is a teak wainscot throughout which is a key element in ensuring a perfect atmosphere of light and warmth. Exposed hull surfaces are lined with a teak 2” strip planked ceiling. All seating is upholstered in forest green Ultrasuede.
The head and shower floors are molded GRP covered with varnished teak grates. Ample shelving, bookshelves and teak handholds are provided throughout. Full-length mirrors are provided in each stateroom. All water and fuel tanks are located below cabin sole level, providing extensive storage area under seats and furniture throughout the interior.
All countertops in the heads and galley are white Corian. All vertical surfaces in the heads are finished in white Formica with teak stiles and rails. A teak cherry drip rail runs continuously below all portholes and also serves as a convenient handrail.
Variable speed circulation fans are located in the main salon and at each berth. A 5,000 BTU reverse-cycle air conditioning unit is centrally located in the main salon. Additionally, Espar diesel heat can take the chill off quickly and efficiently. The deck hatches, portholes and dorade vents are of polished SS and manufactured by Hood Yacht Systems. Built-in hatch screens and blinds conveniently slide away into concealed compartments within the headliner when not in use The cabin sole is made up of a completely removable system of teak and holly floorboards (insulated around the main engine) with flush chrome lock downs. The overhead is finished in white Formica panels and beautiful teak and holly laminated deck beams. All hanging lockers are lined with cedar. Interior teak and painted surfaces have a satin finish except for the cabin sole which is high gloss. All interior locksets, hinges, light fixtures and assorted hardware are finished in polished stainless steel and chrome completing the crisp, clean overall look of understated luxury.
ACCOMMODATIONS and LAYOUT
Starting forward, a large forepeak locker accessed via a deck hatch accommodates anchor rodes, sails and assorted deck hardware. A solid bulkhead separates this area from the master stateroom which is next aft. This oversized cabin offers a queen size centerline berth, a settee with vanity to port and a full size head and separate shower stall opposite. Two deck prisms, three opening hatches and two opening portholes contribute to this cabin’s bright, open feel.
Next aft, the main salon is flooded with light from six Lexan hull-side fixed ports, eight opening ports in the deckhouse and four overhead hatches. A 3/4 round settee/dinette to starboard includes a center-line settee which encloses the main engine below and provides unequaled engine access when hinged up and out of the way. A combination TV/VCR is hidden in a locker above the settee. There is a full navigation station to port containing a chart table, numerous lockers and drawers and the main power distribution panel. A pilot berth is located outboard of the nav area. A built-in drinks fridge is conveniently located just aft of the settee, yet out of the way of the chef.
The aft head to port is accessible from the main salon via a pocket door as well from the guest stateroom. The guest stateroom contains two large singles berths which easily convert to a queen size berth. There are numerous lockers and drawers including a cedar lined hanging locker.
The galley is next aft to starboard and features a comfortable u-shaped configuration, exceptional storage, a built-in, tilt-out trash bin, a double stainless steel sink and white Corian counter tops.
- Grunert cold plate refrigeration with both 110 Volt AC and engine-driven compressors
- Alder Barbour drink fridge (2002)
- Mariner stainless 3-burner gimbaled range with oven and broiler
- GE built-in microwave oven
The yacht's DC electrical supply is 12 Volt, supplied by three independent battery systems, all of which are new 2018/2019: House batteries - (8) 6 Volt; Engine battery - (1) 12 Volt 8D; Generator battery - (1) 12 Volt.
A 130 amp engine alternator charges the house batteries and a second 55 amp alternator charges engine batteries. Alternatively, all batteries may be charged by a 110 Volt AC Hart Freedom 2500-watt battery charger run off the generator or shore power. Battery condition is monitored via a Link 2000. GFIC waterproof 12 Volt outlets are located at the steering pedestal and nav. station.
The yacht's AC electrical system is 110 Volt/60 cycle. AC power is supplied by a 50 amp shore power inlet. A 5 kW Westerbeke diesel generator (2,152 hours) and a Heart Interface 3000 watt inverter also supply AC. AC functions include: Water heater, refrigeration, electrical outlets, microwave oven, air conditioning, A/C outlets and GFIC waterproof AC outlets in heads and galley.
All ship’s wiring is tinned copper wire and is run in a PVC conduit system from bow to stern. Access for service or additional wiring installation is easily made at load center stations concealed by watertight covers. All wires are color coded and numbered for easy identification.
The main switch panel is located in the vicinity of the nav. station and includes: DC and AC branch circuit breakers with backlighting, battery test meters, reverse polarity indicators, DC and AC voltage and load current meters, DC and AC voltage and amp meters, bilge alarms, inverter controls, and heating and air conditioning controls.
Engine, rudderpost, mast step, cabin plates and seacocks are grounded to a 6" copper strap, glassed to hull running from bow to stern on both sides of hull. A copper screen is glassed into the hull for radio antenna grounding. A separate grounding bar is installed for electronics.
- Running lights
- Masthead light
- Steaming/flood lights
- Mast-mounted deck light
- Compass light
- Stainless overhead dome lights and Frigast reading lamps
- Combination red/white lights in galley and nav. area
- Low-voltage red night lights throughout interior
- 12 Volt lights in heads and galley
- Automatic on/off switches provided for hanging lockers
- Forepeak, lazarette and machinery-space lights
ELECTRONICS and NAVIGATION EQUIPMENT
- Autohelm 7000 autopilot, Type II linear drive with remote and second indicating control head at navigation station
- Robertson AP300PW autopilot with hydraulic drive
- B & G Hydra 330 and 2000 Oceanpack with full function displays and one apparent wind display with information available in cockpit, nav. area and master stateroom
- ICOM M-700 SSB radio with AT-120 coupler
- Leica MX412 Professional differential GPS
- Garmin plotter at helm (2006)
- Furuno 1830 radar with extra cable and cockpit unit
- Furuno monitor (plotter/radar) in cockpit (2010)
- Sirius XM weather system (2010)
- Remote ICOM VHF at helm/main at nav station (new) with DSC
- B&G compass display (new)
- Richie 6” compass
- 15” Mac computer, with PC operating capability for Sirius Weather, chartplotter display
- Computer data ports in nav. area
- Alpine stereo system (new), with high-gain antenna, AM/FM/multi-disc CD, KHF salon speakers
- (2) Bose waterproof cockpit speakers (new)
- Panasonic 13’’ color TV with integral VCR
- Rogue Wave WiFi antenna with multi-device wireless router
- Cable TV shore cord
- Landline telephone with outlets in the salon, master and guest cabins
- Brass clock and barometer
ENGINE and MECHANICAL EQUIPMENT
- 100 hp Westerbeke diesel engine, fresh water cooled (Hours: 3,130)
- Excellent engine access
- 5 kW Westerbeke diesel generator (Hours: 2,152)
- Stainless 1-½” propeller shaft turning an 18”, 3-blade max prop
- Vetus single-lever clutch/throttle control
- Oil change pump, plumbed to both the main engine and generator
- Vetus electric bow thruster
- Sea recovery AM600 watermaker, produces approximately 600 GPD
- Engine drive refrigeration condenser (2009)
- Marine Air 5,000 BTU reverse-cycle heat and A/C with digital controls
- Espar D7L cabin heater with five outlets (2009)
- 110 A/C hot water heater with heat exchanger
- Stainless hot water tank (2011)
- Sureflo pressure water pump (2017)
- Domestic fresh water pump with accumulator tank
- (2) Electric bilge pumps (new, 2019)
- (2) Manual bilge pumps: ((1) new, 2019)
- Holding tank (new 2008)
SAILS and RIGGING
- Ketch rig, electric Hood Sto’way main mast and mizzen with rod rigging
- All new standing rod rigging (2019)
- All new running rigging (2017)
- Hood 4880 Sea Furl headstay system
- Main and mizzen furling motors and seals rebuilt (2009)
- Staysail package
- Full spinnaker package; pole
- Navtec hydraulic boom vang with single function panel
- Storm trysail track with halyard and block
- Harken mainsheet traveler system with Lewmar Spinlock stoppers
- North Sto’way mainsail (2007)
- North Sto’way mizzen (2007)
- North 130% genoa (2007)
- North 85% heavy weather jib (2007, never used)
- Shore asymmetrical cruising spinnaker (MPS) with dousing sleeve
- North storm trysail
- Shore mizzen staysail
- Northstorm jib
- (2) Barient #32 electric primaries
- (1) Barient #28 electric mainsheet/outhaul winch with double jammer
- (2) Barient #27 self-tailing secondaries
- (1) Barient #21 main halyard winch, 2-speed
- (2) Barient #22 genoa halyard winches
- (1) Barient #22 self-tailing spinnaker halyard winch
- (1) Barient #21 mizzen sheet
- (2) Barient #21 halyard winches
DECK HARDWARE and EQUIPMENT
- Stainless, custom, removable davits (2014)
- 5-person 9’-6” AB inflatable with aluminum hull (2013)
- 9.9 hp Yamaha outboard (2013) Low hours
- Nilsson vertical anchor windlass (motor rebuilt 2014) with Nilsson chain stopper
- Second rope/chain hawse pipe to starboard. Built-in hawse on windlass for chain rode
- Lewmar pneumatic windlass controls
- 250' anchor rode with 5/16" H.T. chain
- 200' anchor rode 3/4" nylon, with 25’ of 5/16" chain
- 35 lb. CQR anchor
- 66 lb. Bruce anchor
- Destroyer wheel with elkhide
- Stainless lifelines (2010)
- Custom dodger with roll-up front and elkhide grab bar (new)
- Full (stem to stern) canvas awning
- Cockpit cushions (new)
- Pull-pit and stern rail-mounted teak seats (removable)
- Teak and S/S transom-mounted swim ladder with pull-pit gate
- Salt water washdown with spigot on foredeck
- Hot and cold deck shower
- Emergency tiller
- Fenders and covers
- Fender boards
- Dock lines
- Boat hook
- Ensign pole
- Man-overboard module, MOM-9
Viking offshore 6-person life raft, new cannister and cradle (2017), with hydrostatic release
- Auto-inflate life vests
- Life sling
- Flare kit
- (3) ACR EPIRBs; (2) with GPS capability, plus (1) ACR personal EPIRB
- Custom horseshoe rings
- Life jackets
- Radar reflector mounted on mast
- Fire extinguishers
The owner’s personal effects are excluded from the sale.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from Wellington Yacht Partners, LLC
Norfolk, VA, United States
Cambridge, MD, United States
Shelburne, VT, United States
Branford, CT, United States
Newport, RI, United States