1978 Maxi 95
- View Full Specifications
Modern Swedish classic
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Balvicar, Argyll & Bute, United Kingdom
- Hull Material:
- Current Price:
- £ 19,950 (US$ 25,993)
During its production run the Maxi 95 gained the nickname 'the Swedish Tardis' around the boat shows, the volume of living space provided in the sleek hull design was significantly greater than other designs of the time. From the board of the Swedish Olympic sailor Pelle Peterson the design for the Maxi 95 came hot on the heels of the successful 77. With a practical cruising layout out, spacious interior with separate aft cabin underpinned with a sleek hull including heavily raked ballast keel and skeg hung rudder she was an appealing offering for both cruising sailors and club racers. The design's appealing attributes stand them in good steady today and they offer great spacious family cruisers at very sensible prices.
Tilty Too is a nicely presented example of the class which has been sensibly upgraded throughout. Wintering ashore in Argyll she is available for viewing by appointment.
Please contact at +44 (0)7988763254
Additional Specs, Equipment and Information:
Designer: Pelle Peterson
LOA: 9.50 m
Beam: 3.20 m
LWL: 7.80 m
Maximum Draft: 1.50 m
Displacement: 4100 kgs
Ballast: 1600 kgs
Total Power: 26 HP
Engine Brand: Volvo Penta
Year Built: 1978
Engine Model: MD11C
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: 2 blade propeller
Drive Type: Direct Drive
Engine Power: 26 HP
Fresh Water Tanks: 1 (190 Liters)
Fuel Tanks: 1 (55 Liters)
Electrical Circuit: 12V
The Maxi range in the late 70's and early 80's had an easily identifiable style with the silhouette immediately identifying the boat as a Pelle Peterson design. Both hull and deck mouldings are constructed of heavy weight hand laminated GRP mouldings finished in and off white gelcoat with styling stripe and saloon portlights below deck level breaking up the then relatively high topsides.
Below the waterline the hull is shaped for great sailing performance with a modern fin and skeg type arrangement. The encapsulated ballast keel is of lead construction with the skeg hung rudder at the aft end of the hull. The boat was given a West Epoxy preventative osmosis treatment below the waterline in 2015.
Spars & Rigging
The boat is fitted with her original spars, rigged as a mast head sloop with all spars finished in a black anodising. All standing rigging was replace with new in 2007 with all standing rigging of 1x19 stainless steel wire with roll swage type terminations and chrome plated, bronze bodied rigging screws. All running rigging has been replaced during the current ownership.
Sails & Covers
- Mainsail - Slab reefing. Dacron (2005)
- Genoa - Roller reefing. Hydronet (2005)
- Cruising chute.
- Mainsail Cover - Stackpack type.
- Main Anchor - 15kg Rocna on 60m, 8mm chain rode.
- Kedge Anchor - 19lb CQR.
- Windlass - Simpson Lawrence SeaWolf electric with chain gypsy and warping drum.
As with all the Peterson designed Maxi's of this era forward of the cockpit the deck line is essentially flush making moving around the deck very easy. The deck is finished with very little in the way of timber fittings, all those present being within the cockpit making routine maintenance and protection very easy.
On the foredeck the electric anchor windlass is fitted with the anchor chain self stowing into the large top opening, self draining chain locker. The decks are clear; apart from the small foredeck hatch aft to the mast step. Aft of the mast step there is gentle rise in the deck around the centre line with the sprayhood spanning almost the full width of the deck.
Access to the cockpit is around either side of the sprayhood with the cockpit being the full width of the hull and no distinguishable raised coamings. The deep cockpit is however well protected and provides a very spacious and safe area for the crew with the wheel mounted at the aft end of the centrally mounted cockpit table. Wide companionways are provided at the forward and aft ends of the cockpit to access the separate aft cabin and main below decks accommodation space.
- Depth Sounder - Autohelm ST50
- Log - Autohelm ST50
- Wind Instrument - Autohelm ST50
- VHF - Icom DSC type.
- GPS - Magellan, hand held type.
- Autopilot - Autohelm 3000
- Plotter - Garmin 720S with depth sounder transducer.
- Invertor - Sterling 1800W
- Battery Monitor - Mastervolt Lite
- CD Player
- Heads - Jabsco
- Cooker - Techimpex gas type with 2 burners, grill and oven.
- Fridge - Frigoboat system.
- Fenders - Selection, with fender step.
- Mooring Warps - Selection of 3 strand nylon lines.
- Manual Bilge Pump - Whale Gusher 10
- Electric Bilge Pump - Automatic 500LPM
- Cockpit Speakers
- Tender - Waveline 260
- Outboard - Yamaha Malta 3hp 2 stroke.
- Outboard Storage Bracket
- Boarding Ladder - mounted on transom.
For a design built in the late 1970's the design and construction of the accommodation space was well ahead of its time and doesn't look dated against modern boats today. The interior is constructed with an internal GRP moulding creating the bases for all units with varnished teak veneered plywood being used to complete the construction.
The forepeak provides two single berths in the traditional V-berth formation with an infill section creating a spacious double when required. Storage is provided in an overhead locker forward with some locker space beneath.
Concealing the mid mounted engine the centrally mounted drop leaf saloon table unit dominates the living saloon space. Bench style settees are provided along both port and starboard sides of the space. Both settees convert to generously sized single berths. Storage is provided around the saloon in a mixture of overhead lockers and beneath the settees.
Located to port of the living space aft is the galley appointed with gas cooker, single sink, top loading fridge. A good selection of storage is provided within the galley area.
A separate heads compartment is provided to starboard with Jabsco marine toilet, sink and vanity unit.
Accessed via its own companionway at the aft end of the cockpit is the separate aft cabin. This cabin space provides two spacious single bunks.
- Liferaft - 4 person, canister.
- Lifejacket - 4 off Auto Inflate type.
- Horseshoe Buoy - with light
- MOB Recovery Sling.
A design feature from Pelle Peterson's eye for performance the engine is mounted further forward than you may expect with the engine weight kept in the middle part of the boat over the keel. The engine is housed in a sound insulated box which also forms the saloon table. With the table easily dismantling and its central position excellent access is provided around the whole engine and gearbox assembly.
Sterngear is of the conventional shaft type with a traditional packing type stern gland and bronze fixed 2 blade propellor.
- Domestic Bank - 2 off 100Ah lead acid type.
- Engine Bank - 1 off 95Ah lead acid type.
Battery charging is via engine driven alternator which is fitted with an Adverc smart charging regulator to optimise performance.
In this case we are acting as brokers only. The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.
This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from Mark Cameron Yachts
Tarbert, Argyll & Bute, United Kingdom
Ardfern, Argyll & Bute, United Kingdom
Helensburgh, Argyll & Bute, United Kingdom
Oban, Argyll & Bute, United Kingdom
Crinan, Argyll & Bute, United Kingdom
Ardfern, Argyll & Bute, United Kingdom