Hull and superstructure molds from high-grade female tooling. Hull construction includes use of USA-made, Cook gel coat. Hand-laid Knytex fiberglass construction with closed-cell PVC sandwich core used in topsides. Solid fiberglass below waterline with blister-resistant vinylester resin utilized on first, two laminates below the waterline with Kevlar reinforcements. Superstructure includes end-grain balsa core and Knytex surface mats for print-through reduction. Teak aft and side decks. Boat and fore decks have GripTex non-skid finish. Bulwark has molded plank lines with gelcoat finish. Polyurethane formulate marine sealants used at hull-to-deck, boat deck joints and exterior fittings. Marine-grade plywood bulkheads with molded fiberglass hat section stringers. Teak veneer walls and cabinetry with stain varnish.
Entering the saloon through the welded aluminum water tight door with Clear View retractable screen from the fully covered aft deck there is a convertable settee with storage under to port and an L-shaped settee with Hi-Lo table to starboard. There are large opening windows port and starboard, and in the aft bulkhead, each with screens, drapes, and teak valances. Wall to wall carpeting installed throughout the boat since she was new has kept the teak parquet floors in pristine condition.
The open-faced galley is located forward of the saloon on the starboard side. There is generous counter and storage space making meal preparation a pleasure while allowing the cook to be included in the saloon activities.
Norcold dual voltage refrigerator/freezer
Force 10 3 burner propane stove with oven
Drawer freezer across from galley
Stainless steel sink
The large master stateroom is forward of the pilothouse. There is a queen-size island berth, 2 hanging lockers, mirrored and lighted dresser. Additional storage is provided by generous under-berth drawers and under bed storage accessed with pneumatic lifts. Five stainless steel opening ports and an overhead hatch with screens provide wonderful light and ventialtion.
The head is aft of the stateroom on the starboard side. There is a household size Sealand VacuFlush freshwater head, stall shower with aluminum and glass bi-fold door, vanity with mirrored medicine chest and stainless steel opening port for natural light and ventilation.
The pilothouse is a large open and airy room. Visibility is excellent as is access to exterior decks. There are weathertight welded aluminum Dutch doors port and starboard with Clear View retractable screens which, combined with a stainless steel aft bulkhead port provide plenty of natural ventilation. The settee allows for guests to keep the captain company and also converts to a double berth for overnight guests. For working or eating underway there is also a custom teak table at the pilothouse settee that removes to pull the berth out. Additional teak starage racks for books are placed throughout the pilothouse.
Balmar 160 Amp high output alternator w/ external Balmar regulator
Xantrex 3000 watt inverter/charger with Link 1000 remote panel in saloon
Newmar Phase Three 40 Amp smart charger
30 Amp automatic battery charger for bow thruster batteries
Engine Room and Machinery
One of the unique features of the Krogen 39' is the stand-up engine room. Primary access is from a walk-thru door at the landing from the pilothouse steps, aft of the stateroom. All systems are readily accesible. There is also a workbench with storage and overhead lighting.
John Deere 4045 TFM 120 hp diesel - 3910 hours
ZF Transmission w/ hydraulic PTO for stabilizer pump
ABT 10 hp dual prop 24 volt bow thruster w/ seperate batteries and charger
Tides dripless shaft packing
Automatic fire suppression for engine room
Automatic fire suppression for inside generator enclosure
Cruisair reverse cycle air conditioning (36,000 BTU's)
AVON 280 RIB with 9.9 hp Yamaha
Splendid combination washer and dryer (vented to outside)
SensorMax Model 17 variable speed water pump for fresh water pump
SensorMax Model 17 variable pressure saltwater washdown on bow
Line cutter on prop shaft
Maxwell VWC2200 anchor windlass (3 station)
SuperMax 17 anchor w/ 300' of 3/8" chain
CQR anchor w/ 15' of 3/8" chain and 300' 5/8" line
Imtra intermitant wipers w/ washers
Custom boarding and safety railings port and starboard under boat deck overhang
Custom generator relocation and access hatch modification
Boat deck railing modification to allow easier dinghy launching
Dual Superwinch S4000 electric winches on mast & boom w/ stainless steel cables
Block and tackle for singlehanded mast lowering and raising
New flybridge captain's chair
New dinghy cover 2011
New console cover 2012
Portable fuel polisher
Removable lazarette access ladder
New style aft opening pneumatic hatch for upper deck access
Custom step/storage area at pilothouse settee
Custom work table in pilothouse
Pilothouse privacy curtains
A/C outlet in cockpit and engine room
Slide out 43 quart freezer in cabinet in saloon
19" Sanyo HD TV and DVD/VHS player
Two spare starters
Spare Balmar 160 AMP alternator
Spare SensorMax Model 17 waterpump for either wash down or onboard water
Spare 4 blade propeller
Extensive engine parts for main and generator
Personal effects, tools, ships clock & barometer and art work
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.