The warm water and the incredible weather makes this destination for trying a Corsair second to none. Every single day, and we mean every single day (barring hurricanes, of course) and including holidays, we are available to take prospective multihull owners out for demo sails. Our demo sails are always absolutely free!

We’ll do everything we can to take you out on the boat you most want to try under the conditions you want to experience. While you are here, why not take the opportunity to view most all of Corsair’s models! We always have a sizable selection of new and pre-owned boats on site for viewing or purchase.

Just call or e-mail us to schedule your ultimate demo sail!

Featured Boat 38' Seawind 1160 #285 2005 US$ 349,000 STANDARD SPECIFICATIONS AND EQUIPMENT   PRICE JUST REDUCED!! ALL REASONABLE OFFERS WILL BE CONSIDERED! MOTIVATED SELLER   1. GENERAL: The overall finish of the Seawind 1160 will be consistent with a luxury world-standard yacht of this size and type. Only very high quality equipment is used throughout. The overall aim is for a level of construction, workmanship, equipment, fitout and style that surpasses any other comparable catamaran available in the market at this price range.   2. EXTERIOR / LAMINATE: Finish: Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas. Hull Laminate: Vinyl Ester (Modified epoxy) resin laminate of the hulls between the gelcoat and the foam core. Polyester resin elsewhere. Laminate specifications are to Australian and International Survey Standards.   3. MAST/BOOM/SAILS: • Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig. • Standing Rigging - Forestay 3/8 (10mm) 1 x 19 Dieform wire. •  Sidestays 3/8 (10mm) 1 x 19 Dieform wire •  Diamonds 5/16 (8mm) 1 x 19 Dieform wire. • All fitted with Sealock turnbuckles and end fittings. • Halyards - Main halyard: 12 mm Spectra rope : Heavy duty shackle. •  Genoa halyard: 8 mm Spectra rope. Heavy duty shackle. •  Topping lift: 10 mm rope, Heavy duty shackle. •  Spinnaker Halyard: 10mm rope with snap-shackle spliced to end. • Boom outhaul. • 2 x mainsail single line reefing fitted. • All halyards, reefing lines to be lead back to cockpit through turning blocks, rope   clutches (Spinlock). • Fully battened mainsail. Triple stitched reinforced construction. Leach adjustable batten    end caps. •  Fibreglass sail battens. Roller bearing batten cars. • Cruising mainsail cover with integrated lazy jack system. • Self-tacking headsail. Profurl headsail furler. Curved headsail traveller track with end    stops. Control sheet to cockpit.   4. DECK EQUIPMENT: • Aluminium Hatches & portholes (9 in total) • 4 x Forward Hatches 470mm x 470mm (Gebo) • 2 x Mid cabin hatches 470mm x 470mm (Gebo) • 1 x Port Bathroom window hatch 507mm x 377mm (Gebo) • 1 x Galley window hatch 507mm x 377mm (Gebo) • 1 x Aft Cabin window hatch 507mm x 377mm (Gebo) • Fibreglass Deck Hatches: • Forward anchor & storage hatches x 5 • Cockpit storage hatches x 2 • 6 x Docking cleats. Each side : bow, stern & amidships. • 1 x Heavy duty mooring cleat on forward walkway. • Ventilation: 2 x forward cabin hatch vents. • Mast base turning blocks. All halyards & sail controls to cockpit. • 14 x Rope clutches - Spinlock brand. • Sheet winches : 2 x Harken 46ST – 2 speed self tailing • Screecher/MPS winches: 2 x Harken 40s – 2 speed self tailing. • Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines.   700mm high to meet Australian survey requirements.. • 2 x transom access gates with pelican hook releases. • 2 x side access gates with pelican hook releases. • Aft swim ladder : folding stainless aft swim ladder.   5. FORWARD BEAM, CATWALK AND TRAMPOLINES: • Forward beam section 125 x 3mm. Powder coated white. • Adjustable pelican striker and cable. • 1 x Mooring rollers above foredeck. • 2 x Anchor roller under deck. Permanent stowage position for 35lb Delta    anchor. (cheeks 75mm high). • Catwalk in foam-sandwich fibreglass. • Plastic coated open weave trampolines.   6. AFT BEAM AND DECK: • Moulded fibreglass Targa Bar with curved mainsheet track. • Stainless steel framed slatted seats behind aft beam. Fibreglass top table between seats. • Stainless steel BBQ.   7. RUDDER SYSTEM: • Twin helm stations : 2 X 32” stainless steel steering wheels. • Both wheels independently linked to steering system. – system offers back-up    redundancy. • Helm seats with ice box under port side and storage under starboard side.   8. INTERIOR FINISH: • Polished beech & beech laminate interior. • Sides and cabin top lined with vinyl or moulded gelcoat. • Floors : Common area soles simulated teak with holly inlay; Cabin soles carpeted.   9. SALOON • Ornate polished timber dining table: Lowers to create coffee table or double bed. • Upholstered settee. • Cocktail cabinet with ornate polished hinging lid. • Forward opening windows in 10mm toughened glass in marine anodised aluminium    frame. Side windows in 6mm toughened glass. • Simulated teak & holly flooring. • Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding    mechanism for folding into Targa walkway.   11. GALLEY • Spacious galley with co-ordinated Polystone counter surfaces, timber accents. • Three (3 ) burner LPG stove & oven. Stainless steel pot holders. Flame failure device to    shut off LPG immediately in event of flame going out. • Double bowl stainless steel sink. • Pressure hot & cold fresh water system. Single lever mixing tap. • Refrigerator : Front opening upright “Vitrifrigo” fridge 130 litres. • Spacious freezer – large twin 30 litre top loading, heavily insulated. 12volt Eutectic system    by ICEER. • Under bench storage with polished timber door fronts & cutlery drawers. • Inboard side of galley: Over-bench cupboard with sliding door fronts • Simulated teak & holly flooring. • Paper towel holder. • LPG solenoid control in galley   12. SLEEPING CABINS: • Polished timber solid doors on all private cabins. • Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm) • Aft Starboard cabin : Double bed (1990mm x 1230mm) • Mattresses to be 150mm ( 6” ) foam upholstered. • Cabins lined. • Recessed 12volt lighting. • Storage/Cupboards. • Carpeted floors.   13. PORT HEAD : • Polished timber solid lockable door. • PAR manual toilet. Discharge via holding tank. • Holding tanks built in. Discharge Pump out by shore station or directly overboard. Port    130L and Stb 110L. • Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements. • Vanity basin with pressure hot & cold water. • Separate shower stall with clear glass door. Wall mounted shower head & mixer tap. • Electric shower bilge pump with direct overboard discharge. • Large quantity cupboards / shelves to very high quality.   14. STARBOARD HEAD : • Polished timber solid lockable door. • PAR manual toilet. Discharge via holding tank. • Holding tank built in. Discharge Pump out by shore station or directly overboard. • Pipes, skin fittings and seacocks to be easily accessible and to meet survey    requirements. • Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with    electric shower bilge pump. • Cupboard/shelves to very high quality.   15. LIGHTING/ELECTRICAL SYSTEM: • High quality DC electrical switch panel with circuit breakers, LED indicator lights and    voltage display. • Marine grade tinned electrical wiring with extensive use of heat sealed connectors.. • Batteries x 3 comprising: House System (400 amp hrs) : 2 x 200 amp hr AGM      (Absorbed Glass Matt) deep cycle / heavy duty batteries. One engine cranking battery –     700 CCA AGM. • 230amp heavy duty isolation switch. • 12 V lighting : Numerous 12V interior lamps and courtesy lights throughout including    recessed lights in cockpit. Dome lights in cockpit. • 2 x 12V Outlets. • Survey approved navigation lights. Port & Starboard mounted on bow rails. • Deck floodlight mounted on spreaders. • Mast head anchor / riding light.   16. PLUMBING / FRESH WATER TANKS: • Pressure hot & cold water system. Hot water storage system ( 40 litre / 8.8 gallons) . • Hot & cold water to galley and both bathrooms. • Galley fresh water tap is lever type ( Flickmaster or similar). • Fresh water tank: 750 litres ( 165 gallons). Remote deck filler. • Johnson fresh water pump. • Electric bilge pumps (2) with controls integral with master battery switch panel. Float    Switches (2). • Manual bilge pumps (2) in each hull. • Bronze through-hull fittings to Australian survey standard. • PAR manual toilets in each head. • Port bathroom with separate shower stall. Starboard bathroom with dual purpose faucet    & shower. • Electric sump pump for shower drain. • 2 x LPG bottles – 4.5kg galvanised. • Fresh water tank gauge.   17. ENGINES: • Twin Yanmar 30hp saildrive diesel engines. Fresh water cooling, rubber isolation    mounts on reinforced fibreglass bed with integral oil drip pan. • Two bladed folding propellers. • Dual engine controls at port helm station. Remote electric key start at engine controls. • Fuel tanks: Total 360 litres (80 gallons) in two survey approved pressure tested    aluminium tanks. Fuel gauges fitted. • Water intakes for engines protected by external strainer. ( 1 per engine) • Twin primary Racor ( or similar) water separator / fuel filters, secondary engine fuel    filters. Engine, fuel tank & fuel line installation to Australian standards to meet offshore    survey.   • Console mounted engine instruments with electric tachometers, engine monitoring &    warning systems, engine hour meters.   18. NAVIGATION: • Twin steering compasses.   19. ANCHORING / MOORING: • Muir Cougar electric anchor winch with chain & gypsy. Located under locker to give   clean deck. • Primary anchor is stored in a specially designed anchor roller under the forward beam. • Anchor winch has foot switch at the winch plus a remote up / down control at the helm    station. • 3 x PVC Inflatable Fenders- 1 '3 X 4" X 6" Fender Board • 8 x Mooring lines (each 15 metres x 14mm).   20. ANTIFOULING / STRIPING: • Epoxy barrier coat plus 2 coats of high quality black antifouling bottom paint. • Seawind 1160 decals on each hull and stern. .

The Finish Line

3705 SE Dixie Highway Stuart, FL 34997, United States

Toll-free 866-369-3291 Tel 772-220-2994 Fax 866-641-2528 Email Us

http://www.yachtworld.com/fboats

---