2017 Seawind 1250

Additional Specs, Equipment and Information:

Specs
Keel: Other
Hull Shape: Catamaran

Dimensions
LOA: 41 ft 0 in
Beam: 22 ft 4 in
Maximum Draft: 3 ft 8 in
Dry Weight: 18165 lbs

Engines
Total Power: 58 HP

Engine 1:
Engine Brand: Yanmar
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: Folding propeller
Drive Type: Sail drive
Engine Power: 29 HP
Engine 2:
Engine Brand: Yanmar
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: Folding propeller
Drive Type: Sail drive
Engine Power: 29 HP


Tanks
Fresh Water Tanks: (185 Gallons)
Fuel Tanks: (126 Gallons)

Accommodations
Number of cabins: 3
Number of heads: 2

Manufacturer Provided Description

With 27 years experience building mullihulls. Seawind’s Richard Ward wanted to build a cruising catamaran specifically designed for serious blue water cruising. The result was the Seawind 1250, 41ft of the best ideas, engineering and craftsmanship accumulated by his team of expert builders. However, before releasing the new model to production, Richard wanted to put the boat through Its paces and personally sailed the first Seawind 1250 across the notorious Bass Strait to test her seaworthiness. Impressed by the boats performance, but still not satisfied.Seawind’s delivery skipper was ordered to sail the 1250 across the Tasman Sea to New Zealand and back, over some of the worst sea conditions in the world and do his best to -Break It” , After successfully completing a 6,000 NM ocean sea trial, Richard is finally satisfied .

Now you can cruise In the confidence that Seawind has pushed the limits to produce a boat that will take you to the limits.

Philosophy

Entertainment, helm controls, navigation station, office and even a day-bed are all located within close reach of the super spacious Seawind 1250 saloon. The Australian indoor / outdoor lifestyle is entrenched in this new design, with an unbeatable living area complimented with brilliant natural ventilation, targa lounges, BBQ, Ice box (or optional fridge) and social helm seats putting the skipper in control as well as in the conversation. Best of all, you can enjoy what many cats compromise on …… “visibility”‘ for the skipper AND crew. with 360 degree views from the helm, targa seats, or saloon seats all within the protection of the fiberglass coachouse and targa roof.

The Seawind 1250 also features:

The twin helm positions on the Seawlnd 1250 offer the perfect balance between excellent 360 degree visibility and total protection from the weather in any conditions.

Skylights above give direct mainsail visibility and the comfortable and ergonomic seats are just as much a social setting as a steering position.

ALL controls are at your fingertips and use Seawind’s refined short handed sailing optimization system to provide ultimate control from the helm, avoiding the need to go forward for virtually any task!

Deck

• Aluminium Hatches & portholes (9 in total)
  • 4 x Forward Hatches 470mm x 470mm (Gebo)
  • 2 x Mid cabin hatches 470mm x 470mm (Gebo)
  • 1 x Port Bathroom window hatch 507mm x 377mm (Gebo)
  • 1 x Galley window hatch 507mm x 377mm (Gebo)
  • 2 x Aft Cabin window hatch (1 x Port, 1 x Starboard) 507mm x 377mm (Gebo)
• Fibreglass Deck Hatches:
  Forward anchor & storage hatches x 5
• Cockpit storage hatches
• Cockpit Icebox & hatch
• 6 x Docking cleats. Each side : bow, stern & amidships.
• 1 x Heavy duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks. All halyards & sail controls to cockpit.
• 12 x Rope clutches – Spinlock brand.
• Manual Sheet winches : 1 x Harken 46ST – 2 speed self tailing & 2 x Harken 40ST – 2 speed self tailing.
• Electric Sheet winches: 1 x Harken46ST located at the Port Helm
• Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. 700mm high to
  meet Australian survey requirements.
• 2 x transom access gates with pelican hook releases.
• 2 x side access gates with pelican hook releases.
• Aft swim ladder : folding stainless aft swim ladder.

Mast/Boom/Sails

• Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
• Standing Rigging
  • Forestay 3/8 (10mm) 1 x 19Dieform wire.
  • Sidestays 3/8 (10mm) 1 x 19 Dieform wire
  • Diamonds 5/16 (8mm) 1 x 19 Dieform wire
  • All fitted with Sealock turnbuckles and T-ball end fittings.
• Halyards
  • Main halyard: 12 mm Spectra rope : Heavy duty shackle.
  • Genoa halyard: 8 mm Spectra rope. Heavy duty shackle.
  • Topping lift: 10 mm rope, Heavy duty shackle.
  • Spinnaker Halyard: 12mm ropewith snap-shackle spliced to end.
• Boom outhaul.
• 2 x mainsail single line reefing fitted.
• All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches (Spinlock).
• Fully battened mainsail – performance cruising laminate Pentex sail cloth with a radial cut design.
  Triple stitched reinforced construction. Luff adjustable batten end caps. Fibreglass sail battens. Roller
  bearing batten cars.
• Cruising mainsail cover with integrated lazy jack system.
• Self-tacking headsail – performance cruising laminate Pentex sail cloth with a radial cut design. Curved
  headsail traveller track with end stops. Control sheet to cockpit.
• Profurl headsail furler.

Accommodations

INTERIOR FINISH:

• Choice of Polished beech & beech laminate or polished ash & ash laminate interior.
• Sides and cabin top lined with vinyl or moulded gelcoat.
• Floors : Common area soles simulated teak with holly inlay; Cabin soles carpeted.

SALOON

• Ornate polished timber dining table: Lowers to create coffee table or double bed.
• Upholstered settee with day lounge
• Cocktail cabinet/storage under day lounge
• Polished timber chart table
• Forward opening windows in 10mm toughened glass in marine anodised aluminium frame. Side windows in 6mm toughened glass.
• Simulated teak & holly flooring.
• Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding
  into Targa walkway.
• Leather Upholstered saloon seats and backrests.

SLEEPING CABINS:

• Polished timber solid doors on all private cabins.
• Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm)
• Aft Starboard cabin : Double bed (1990mm x 1230mm)
• Mattresses to be 150mm ( 6” ) quilted foam upholstered.
• Cabins lined.
• Recessed 12volt lighting.
• Storage/Cupboards.
• Carpeted floors.

PORT HEAD :

• Polished timber solid lockable door.
• Manual toilet. Discharge via holding tank.
• Holding tanks built in. Discharge Pump out by shore station or directly overboard. Port 130L and Stb
  110L.
• Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water.
• Wall mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

STARBOARD HEAD :

• Polished timber solid lockable door.
• Manual toilet. Discharge via holding tank.
• Holding tank built in. Discharge Pump out by shore station or directly overboard.
• Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower
  bilge pump.
• Cupboard/shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

Galley

• Spacious galley with co-ordinated Polystone countersurfaces, timber accents.
• Three (3 ) burner LPG stove & oven. Stainless steel pot holders. Flame failure device to shut off LPG
  immediately in event of flame going out.
• Double bowl stainless steel sink.
• Pressure hot & cold fresh water system. Single lever mixing tap.
• Refrigerator : Front opening upright “Vitrifrigo” fridge 130 litres.
• Spacious freezer – large 60 litre draw loading, heavily insulated. 12volt Eutectic system by ICEER.
• Under bench storage with polished timber door fronts & cutlery drawers.
• Inboard side of galley: Over-bench cupboard with sliding door fronts
• Simulated teak & holly flooring.
• LPG solenoid control in galley

Engines

• Twin Yanmar 30hp saildrive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced
  fibreglass bed with integral oil drip pan.
• Two bladed folding propellers.
• Dual teleflex engine controls at port helm station AND starboard helm station. Remote electric key start
  at engine controls.
• Fuel tanks: Total 440 litres (98 gallons) in two survey approved pressure tested aluminium tanks. Fuel
  gauges fitted.
• Water intakes for engines protected by external strainer. ( 1 per engine)
• Twin primary Racor ( or similar) water separator / fuel filters, secondary engine fuel filters. Engine,
  fuel tank & fuel line installation to Australian standards.
• Console mounted engine instruments with electric tachometers, engine monitoring & warning systems,
  engine hour meters.

Electrical

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors.
• Batteries x 3 comprising: House System (400 amp hrs) : 2 x 200 amp hr AGM (Absorbed Glass Matt) deep cycle / heavy duty batteries. One engine cranking battery – 700 CCA AGM.
• 230amp heavy duty isolation switch.
• BEP Battery Monitor
• Battery Charger / Inverter – Mastervolt 100amp / 200W
• 12 V lighting : Numerous 12V LED interior lamps andcourtesy lights throughout including recessed lights
  in cockpit. Dome lights in cockpit. (All lights except fluros are LED)
• 4 x 12V Outlets.
• Survey approved LED navigation lights. Port & Starboard mounted on bow rails.
• Deck floodlight mounted on spreaders.
• Mast head anchor / riding light.
• Aqualuma Underwater transom lights shall be installed under each stern.

Navigation

• Twin steering compasses.
• Raymarine AIS Receiver
• Raymarine P70 Linear Drive Autopilot
• Raymarine E7 Multifunctional Display Chartplotter
• Raymarine i70 Multifunctional Displays x 2 located at Port & Starboard Helm stations
• Raymarine wind vane
• Icom DSC VHF radio.

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

External Links
Manufacturer Website