Its more than 2000 HP of power and the light weight of the carbon fibre outline a design that focuses on the comfort and safety of the owner and his entourage.
The lines of The deckhouse exude elegance and harmony with its stylish dynamic windows further enhanced by the "fin" effect emerging at the highest point of the saloon. The mirrored glass panels on the roll-bar and the back-lit logo on the flybridge are fine examples of innovative styling.
The hull and structures were designed in a successful attempt to find the right balance between conventional composite materials and the more innovative ones such as carbon fibre. This process solidifies the structure and reduces the total weight of the boat which, in turn, allows the two 1150 HP Caterpillar engines to achieve top performance at low consumption. The upper deck can be enjoyed at any time since the hard top can also be remain used whilst underway.
Beauty, powerful engines, cruising elegance, stability at anchor and the option to choose between two layouts for the saloon... there are numerous excellent reasons that can lead to choosing the Azimut 64. In addition, one will witness the intelligent use of space and other exclusive features such as the dinette bench with sliding back shared with the pilot seat. All these distinctive elements place the 64 at the top of its category.
Official Azimut Yachts Dealer and Service - Panama
Official Bertram Yachts Dealer and Service - Central America & Caribbean
Official Tiara Yachts Dealer and Service - Central America & Caribbean
World Wide Brokerage - Regional Contact Numbers:
USA - Miami 1 305-433-3211 USA - California 1 310-492-5144 El Salvador - San Salvador +50321131596 Argentina - Mar Del Plata +542234322606 Venezuela - Caracas +582123357533 Peru - Lima +5117062922 Brazil - Sao Paulo +551130705218 Guatemala - Guatemala City +50223535397 Panama - Panama +5073141000 Chile - Santiago +5625856924 Colombia - Bogota +5713819001 Mexico - Mexico City DF +5585257929
Please contact Lou Sola at +1(305) 349-3837
Additional Specs, Equipment and Information:
LOA: 66 ft 1 in
Beam: 16 ft 7 in
Maximum Draft: 4 ft 11 in
Number of twin berths: 1
Number of double berths: 2
Number of cabins: 3
Number of heads: 3
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
The structural design of the hull has been approved by RINA (CE approval category A). This guarantees the structural quality which is enhanced by the use of innovative materials and technologies.
The hull and all the superstructures (deck, deckhouse, flybridge) have been built using the infusion technique. This construction technology reduces weight and, at the same time, improves construction control and quality.
Bow and stern, engine room and crew cabin trays: these are structural trays made through infusion. A key element in this transformation is the increasingly widespread use of latest generation structural bonding agents (instead of taping).
Fibre glass structure with multiaxial fabrics and powder bonding agent as well as carbon fibre to reinforce areas subject to the highest stress. Neopentilic and isophtalic spray gelcoat. PVC foam is used for the sandwich panels on the hull, deck and superstructures. The structural engine room, collision and bow bulkheads are made of PVC infused sandwich.
Structural calculations have been checked using FEM model analysis. FEM models have been created for the hull and all the superstructures. This calculation system, based on systems used in the aeronautical and automotive industries, simulates the behaviour of the boat when it is subjected to the most severe conditions of stress and accurately tests stress and deformation.
Vinylester resin (maximum resistance to osmosis and print through marking) has been used on the entire hull. lsophthalic resin has been used for the superstructures. On the strength of these characteristics, AZIMUT is able to offer a 5-year warranty against osmosis. Planing keel with deadrise of 17° at the stern and 20° amidships.
Carpeted floor or striped decapè finish oak, 2 three-seater sofas with cabinet on the port side.
Port side coffee table
Bars column on the starboard side
TV system setup
Side Roman blinds
Saloon door blind
Spotlight saloon neon lighting
C-shaped starboard side 5-seater sofa and 3 folding chairs in the corridor at the centre of the boat
Rectangular table with removable centre to ease passage
Port side below deck accommodation ladder with illuminated carpeted steps
Dinette table lighting with direct spotlight and neon lighting
Side Roman blinds
Decapè oak flooring
Lightweight marble worktop
Oak furniture lacquered white matching the saloon/dinette
Stainless steel sink with blender
Three spotlight in line lighting fixed on lacquered ceiling panel and 3 spotlights under
the cabinets between the galley and saloon
Glass ceramic range with four rings and stainless steel pot holders
Active carbon filter hood
Microwave oven + grill
Fridge/freezer with drawers
Lighting on the steps and spotlights on corridor ceiling
Folding double bed placed diagonally with the left side with lockers
Mattress, pillows and bedspread
Vanity table with couches on the right side, cabinet under the stairs with safe and shelves
Open wardrobe with full height coat rack and shelves.
2 central neon type lights on the ceiling
2 wall lights
2 openable portholes per side
Ceiling panel power socket right side above table
Cognac Vetrofreddo sink with mixer
Furniture lacquered brown or cream (also applies to other bathrooms) with bleached
striped oak door
Shower with thermostatic mixer
Shower enclosure with glass door, seat and wooden platform
Neon lighting with shaped fixture
Openable porthole with venetian blinds
Air extractor in the shower enclosure
Folding double bed with lockers
Mattress, pillows and bedspread
2 striped decapè finish oak cupboards (one per side) with cedar interior
2 wall units (one per side) with flap door above the window
2 wall lights
Lighting with 2 ceiling spotlights above the bed and large neon with shaped fixture as the main light