A fantastic RIB new & unused - London Boat Show Special 2013
The A Series is practical and safe. It offers a very dry ride and is reassuring and forgiving to drive. It is the ideal boat for the first time RIB owner with limited experience. The integral moulded deck provides a stable platform, with its tough easy to clean, slip-resistant finish.
This is an ideal family boat for every occasion with great handling in heavy seas and a maximum speed of 32 Knots giving maximum exhilaration and fun on the water.
For more information about this motor cruiser and to arrange a personal inspection, please contact Jason Brasier on the numbers below.
Jason Brasier Boatshowrooms of Harleyford Harleyford@boatshowrooms.com Office +44 (0)1628 569888 Mobile +44 (0)7717 580555
Multi-Rollered Self-aligning Swing Beams to aid Launch and Recovery
48mm dia. Jockey Wheel
Hub Brake Fresh Water Flush Facility
Ribeye Prop Bag
Overall Length - 5.00m
Internal Length - 4.05m
Overall Width - 2.28m
Inside Width - 1.38m
Tube Diameter - 0.46m
Number of Air Chambers - 5
Number of Persons - 8
Maximum Payload - 765kg
Boat Weight Std Spec - 410kg
Maximum Power - 80hp
Engine Shaft - L
RCD Design Category - C
Boat Weight inc Eng/Rigging - 750kg
Boat & Trailer Weight - 1150kg
Trailer Weight - 400kg
Height on Trailer - 2.35m
Height of Boat - 1.80m
Engine Weight - 170kg
Prop Size - 19"
Draft in Water at Rest - 0.47m
Max Speed - 32Knots
Yamaha F80 BETL
These engines take advantage of Yamaha's very latest 4-stroke technology. They too feature a 16-valve, DOHC (Dual Overhead Camshaft) engine, with its advanced intake and exhaust systems and Yamaha's unique multi-point EFI (Electronic Fuel Injection). The system incorporates a micro-computer that analyses and adjusts the fuel/air mixture to match all running conditions.
Primestart - chokeless system - easy as starting your car
DOHC (Double Overhead Camshaft) engine gives improved acceleration and performance
Variable trolling RPM
EFI (Electronic Fuel Injection) for cleaner performance and fuel efficiency
Wide range Power Tilt & Trim allows smooth control at the touch of a button
Yanmaha's Ideal Anti-corrosion Protection, looks after your engine - for life
Y-COP - Immobiliser security system. Push button control security
How often have you wondered why cars are protected from theft or unauthorised use by clever electronics, when outboard engines never are?
Well, as you might expect, the first manufacturer to recognise and act on that widespread thought is Yamaha, with the introduction of its innovative new Y-COP (Yamaha Customer Outboard Protection) system. And now for 2010 model year all new fuel injection, four-stroke outboard models from 30hp to 100hp will feature Y-COP. This simple, easy to use and effective system – with its neat remote control - locks and unlocks the engine at the push of a button. Just like your car in fact! It’s another industry first for Yamaha – and more proof that when it comes to turning customer needs into practical action, Yamaha has no equal.
So desirable are the small craft which have this size of Yamaha outboard engine fitted that for sure, their in-built Y-COP systems will be a real comfort to their proud owners. Why? Because these are the type of craft that are normally stored on a trailer or left on the deck of their mother ship and are very tempting as a target for thieves.
The Y-COP system utilises a simple remote handheld transmitter to immobilise the engine and therefore also the boat when these engines are bolted to the transom. The signal from the transmitter is picked up by a receiver fitted into the boat which is plugged into the LAN (Local Area Network) hub. The signal is then passed to the engine ECM (Engine Control Module – as fitted to all EFI engines) via the standard LAN wiring system.
The engine ECM recognises the signal from the transmitter and unlocks the system to allow the engine to run – just like on your car immobiliser!
All these engines use the standard NMEA 2000 protocol and the engine information feed can be interfaced with other electronic accessories like chartplotters to monitor engine functions and fuel management. The Y-COP system simply integrates into this simple and easy to install system.
Anti-Tamper as standard. The Y-COP receiver and wiring is designed to be easy to install – just plug in, follow the set-up procedure and go! However Y-COP is also clever enough to recognise if someone is tampering with the system and even if it is disconnected or destroyed it will lock the engine into a low rpm mode – enough to get you home but useless to thieves.
Simple to operate.
A Frame with navigation lights
Integral sculpted rear seats (3) with back rests and large storage area beneath.