2012 Morris M42
- View Full Specifications
Price just reduced
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Stamford, CT
- Hull Material:
- Current Price:
- US$ 685,000
"Inglesea" is one of the more recent M42's built and a one of a kind Morris M42. Unlike all others, she was built with a unique two-Cabin interior for family cruising. Using a set of clever pocket doors that slide athwartship, the forward v-berth cabin can be closed off from the main salon. By moving the head/shower unit forward a bit, an additional aft cabin was incorporated in the design making the M42 perfect for both daysailing and family cruising. Always stored in a climate-controlled heated winter shed & maintained to the highest yachting standards, "Inglesea" is likely better than a new boat; having been thoroughly seatrialed, yet lightly used for summer sailing only. She is the perfect "turn key" boat for a family looking to go sailing quickly in what feels like a brand new boat.
Contact broker Eric Roos 207-266-2399 email@example.com or visit our SW Harbor, Maine location at 11 Apple Lane Dysart's Marina. Motivated seller!
Please contact Eric Roos at (207) 266.2399
Additional Specs, Equipment and Information:
Builder: Morris Yachts
Designer: Sparkman & Stephens
Flag of Registry: United States
Hull Shape: Monohull
LOA: 42 ft 3 in
Beam: 11 ft 3 in
LWL: 30 ft 0 in
Maximum Draft: 5 ft 9 in
Ballast: 6235 lbs
Dry Weight: 16279 lbs
Total Power: 39 HP
Engine Brand: Yanmar 4JH
Engine Model: Yanmar 4JH
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: 3 blade propeller
Drive Type: Sail drive
Engine Power: 39 HP
Cruising Speed: 7 mph @ 2000 RPM
Maximum Speed: 7 mph
Fresh Water Tanks: 2 Plastic (25 Gallons)
Fuel Tanks: 1 Aluminum (40 Gallons)
Holding Tanks: 1 Plastic (20 Gallons)
Number of single berths: 2
Number of double berths: 1
Number of cabins: 2
Number of heads: 1
Wind speed and direction
CD player - XM Sat Weather & Radio
VHF - (AIS)
Furling genoa - 100% self tacking jib
Fully battened mainsail
Gennaker/Cruising spinnaker - G-0
Electric winch - (2)
Manual bilge pump
Electric bilge pump
Shore power inlet
I : 44.83 ft
J : 14.92 ft
P : 48.67 ft
E : 17.50 ft
Working Sail Area : 759.00 sq ft
Keel Type: Standard fin keel with bulb and Carbon Fiber spade rudder.
Max Draft: 5' 9"
The Morris Yachts M42 developed out of the tremendous success of her smaller sister, the M36. Retaining all of the great ease of handling features and classic beauty of the M36, the new M42 provides greater interior volume for more luxurious accommodations (especially with her unique two-cabin layout) below and an even larger cockpit with more generous seating. Morris Yachts and the legendary design firm Sparkman and Stephens have once again teamed up to produce a yacht of lasting beauty a yacht that will grace any harbor and provide her owner with pride of ownership for many years. A comfortable, spacious interior with 6' 3" standing headroom is finished in classic Herreshoff style with antique white raised panel bulkheads and gloss varnished solid cherry joinery. The galley is complete with a gimbaled stove, DC refrigeration, Corian countertop, polished SS sink and hot and cold pressure water. The enclosed head includes an electric Tecma macerating toilet, varnished cherry countertop with a polished SS sink, hot and cold pressurized water, wall mount thermostatically controlled shower and overhead hatch for ventilation in an enclosed shower stall. In the salon, the port setee is perfect for lounging or dining at the custom expanding salon table (removable) and starboard settee is also perfect for comfortable lounging or sleeping. The custom expandable table boasts beautiful marquetry inlays & world class craftsmanship and invites gracious dining. The table is mounted on a single removable-tapered pedestal and can be removed and stored in the custom fleece lined canvas bag for times when more space is desired in the main salon. "Butterfly" skylight style hatches above the dining table and eight large fixed portlights provide great natural lighting and ventilation. Twin end tables with storage lockers below and hanging lockers outboard are incorporated in the custom v-berth. Custom raised panel pocket cabin doors open and close athwartship to provide privacy when sleeping. The forward cabin provides a very large berth, full length shelves, and dove-tailed clothing drawers. A large overhead hatch and two 4 SS dorade vents provide loads of light and ventilation. Completely unique to this M42 "Inglesea"; an additional sleeping cabin has been added aft of the head/shower with raised panel door; hanging locker and side table. Perfect for a small family or two couples cruising. An additional opening deck hatch has been added over the head for ventilation and an opening port light has been added to the cockpit foot well with screen for more air in the aft cabin. Sail handling has been thoroughly engineered for simplicity, reliability, and ease of use. A Hall Spars carbon fiber mast, Hall Quick vang and SS hydraulic backstay adjuster are standard equipment. Her generous fractional rig with self-tacking jib makes for a powerful yet remarkably easy to control sail plan. As perfected on the M36, all sheets, main halyard, main furling line (has Liesurefurl in-boom mainsail furling) jib furling line, reef line, and vang control line are led below deck to rope clutches and electric winches located in the cockpit within easy reach of the helmsperson. Additional foot switches have been added to control the winches and are criss-crossed to operate winch opposite of button. The asymmetrical cruising spinnaker is trimmed from self-tailing manual winches outboard of the helm. All of these features allow for comfortable and convenient access to all sail controls for the skipper with lots of cockpit room for family and guests.
Infused composite hull with Vinylester resin throughout and Balsa corre. Composite longitudinal stringers and transverse keel floors. Fiberglass engine bed. Marine plywood structural bulkheads. Manually consolidated composite deck with Polyester resin and vacuum-bagged Core-Cell foam core. High density core replaces the standard core in areas of deck hardware and through hull fittings. Quarter sewn teak decking on side decks and cockpit sole.
Yanmar 3JH4E x SD Saiddrive unit, 3-cylinder, direct-injected, fresh water-cooled marine diesel engine, Maximum 39 hp @ 3000 RPM. Flex-o-fold 16" 3-plade propeller. Yanmar engine mount pan is fiberglass. Morris custom instrument panel at helm; includes Faria gauges with ss bezels, ignition switch, preheat button, strt button, stop button, audible alarms for cooling water high temperature, low lube oil pressure, saildrive water sensor and tachometer with light switch. Edson ss single lever throttle located on the pedestal. Engine box is fitted with Sounddown Vinyl/Foam composite noise reduction insulation.
Additional Yacht description
Wind, depth and speed instruments are standard, mounted above the companionway in correct line of sight for the helmsman. SS drink-holders provided on each side of the cockpit reflect the level of detail pursued to ensure comfortable and convenient single handed sailing. A Hall Spars carbon fiber mast, aluminum Liesurefurl boom, Forespar Yacht Rod Hydraulic/gas vang and Sailtec SS hydraulic backstay adjuster provide you with superior equipment for superior performance. All of these features allow for a comfortable and fun sailing experience for everyone aboard, convenient access to all sail controls for the skipper and lots of cockpit room for family and guests.
Forward of the control pods are spacious port and starboard cockpit seats with Sunbrella-covered closed cell foam cushions (with custom backrest cushions as well.) The seats are over six feet in length, perfect for napping or comfortably suitable for seating six adults. Hatches on all three cockpit seats allow access to below-decks storage. In keeping with Morris's attention to detail the starboard hatch is fitted with cleverly designed locking devices that eliminate exterior hardware and padlocks. A standard gloss-varnished teak drop leaf table with integrated cooler is fixed on ss threaded mounting plates between the cockpit table base and the teak riser on the cockpit sole. This allows table to be easily removed for racing. Mounting plates are recessed into the teak veneer. No more hauling out the cockpit table from some storage place when guests are ready for their lunch. The varnished teak cockpit coaming, eyebrow and teak cockpit sole reward the eye and touch. Everything just feels and looks right.
A high performance bulbed keel of moderate draft together with a high aspect ratio carbon fiber spade rudder are designed and built for speed, stability, and precise control. Exterior styling is traditional with gelcoat deckhouse and gloss varnished teak joinery including toe rail, eyebrow trim, dorade boxes, coaming cap, companionway hatch and cabin top handrails. The varnished teak toe rail runs from bow to stern and is fitted at correct intervals with custom designed integral stainless steel chocks. Pad eyes and stainless steel rub rails are also placed for the clipped on polar fleece-covered fenders. No more fumbling with fender lines. The weather decks are fitted with quarter sewn old growth teak; beautiful classic look that also assures solid footing.
Should the breeze quit before you are ready to go in, auxiliary propulsion comes from a Yanmar 39hp Saildrive diesel engine with a three blade folding Flex-O-Fold propeller. The M42 maneuvers under power as responsively as she does under sail, turns in her own boat length and backs down straight as an arrow.
A VHF radio, GPS with color display, sailing instruments with three separate displays for wind, depth and speed readings are all included aboard "Inglesea". All mechanical installations are simple and straightforward. Thru-hull fittings, filters and all regularly serviced items are easily accessible and all wiring is clearly labeled. The custom owner's manual is complete with illustrations and step by step trouble-shooting to guide you or your yard with service matters. The M42 is CE approved for Class B or C depending on optional equipment selected.
(2) 12 VDC Mastervolt AGM house batteries (450 Ah @ 12 VDC)
(1) Optima 1000M amp engine start battery with 800 cold cranking amps.
(1) Mastervolt 90 Amp/12 VDC alternator with multi-stage regulator for battery charging.
(1) Mastervolt 12 VDC / 110 VAC distribution panel
(2) 12 VDC outlets
(1) Mastervolt 2500W mass combi inverter/charger unit
(1) 110V shore power system with (2) outlets, SS power inlet, and 50ft x 30 amp cord.
Sacrificial zincs are provided in design. Zinc saver galvanic isolator on AC system ground wire.
Electronics, Communication & Navigation
(1) Raymarine Ray55 waterproof VHF Radio w/ additional RayMic cockpit-mounted remote microphone.
(3) Raymarine i70 multi-function instrument displays for speed, depth and wind mounted on the aft face of the seahood.
(1) Raymarine C90W GPS color LCD chart plotter and Radar display w/internal antenna mounted at the pedestal. GPS has been interfaced with all Raymarine instruments.
AIS Class B Transceiver interfaced with GPS plotter.
Sirius Weather receiver is interfaced with GPS plotter.
Raymarine ST6002-X10 Autopilot interfaced with GPS
(1) Fusion marine stereo; includes MS CD600 receiver, Ipod docking station, wired remote located in cockpit. Cockpit speakers located in foot well and painted to match cockpit gelcoat color.
(1) Ritchie 5" pedestal mount compass with polished SS cover.
(1) Perko bicolor bow light with chrome plated brass housing.
(1) Perko transom stern light with chrome plated brass housing.
(1) Aquasignal tri-color masthead light.
(1) Aquasignal combination steaming light and deck flood light.
(2) Stainless steel 4" cowl vents mounted on varnished teak dorade boxes. SS dorade guards.
(5) SS foredeck and cabin top hatches.
(7) Hella cabin fans located around the interior of the boat.
Isotherm 1.87 CUFT top loading 12VDC refrigerator with stainless steel liner and removable shelves.
Force 10 two burner propane stove with thermostat controlled oven on a gimbel mount.
FRESH WATER SYSTEM
50-gallon fresh water capacity.
(1) SS deck fill.
(1) Shurflo pressure water system pump.
(1) Quick 6.5 gallon SS water heater plumbed to engine heat exchanger and 110VAC.
(1) Whale water system filter.
(1) Cruz-Pro multi-tank gauge system.
(1) Cockpit shower with hot and cold pressure water installed and 13' telescoping shower hose.
(1) Tecma electric macerating marine toilet.
(1) 20-gallon Polyethylene waste holding tank with gravity drain to seacock for overboard discharge.
(1) Snake River external tank level monitor.
(1) Jabsco diaphragm 12VDC bilge pump with removable strainer.
(1) Whale Gusher 10 manual bilge pump located near helm in cockpit
FUEL OIL SYSTEM
(1) Racor model #220 spin-on fuel/water separator.
(1) 40-gallon aluminum fuel tank w/SS deck fill.
(1) Cruz-Pro tank gauge.
STEERING AND RUDDER
Edson wire rope/chain steering system with 44" teak rim wheel.
Carbon fiber rudder and rudderpost.
Two self-aligning rudder bearings and adjustable lip seal.
FIRE & SAFETY EQUIPMENT
(3) Kidde Mariner 110 portable dry chemical fire extinguisher located in the accommodations.
Engine compartment Fire Port.
Liferaft - 4 man offshore-style raft.
(1) Removable two piece SS folding ladder with PVC treads and custom SS low profile mounting brackets midship installed on the starboard side. The ladder has two folding arms that bear against the hull for support when deployed. The ladder can be easily removed and stored in the anchor locker.
Outfit and Furnishing
The interior is built Herreshoff style with Antique white custom raised panel bulkheads and gloss varnished cherry joinery. The cabin sides are satin varnished cherry veneer and the cabin top is finished with painted wood ceiling strips overhead and soft Majilite panels on the side decks. Custom expandable table is mounted in the main salon and has fleece-lined canvas storage bag for times when more space is desired in salon.
(6) Wall-mounted SS cabin lights with integral switches in main salon and v-berth.
(1) SS spot light above main salon table.
(3) SS dome lights with integral switches in the galley, head and engine compartment.
(3) Scandvik adjustable rod lights. (2) In the galley and one above the head mirror.
(1) Varnished Cherry counter top with polished SS sink and single lever faucet.
(1) Scandvik mixer valve with shower head.
(1) Molded fiberglass floor pan with integral shower sump and electric drain pump.
(1) High grade glass mirror with frame on forward bulkhead.
(1) Corian counter top.
(1) Mirror-polished stainless steel sink with chrome single lever mixer faucet.
(1) Garbage bin.
Drawers and doors as required.
WINDOWS, PORTS, & HATCHES
Deckhouse portlights are toughened safety glass, frameless installation.
Deck hatches are low-profile Stainless steel. (1) Foredeck and (4) on the cabin top.
Ocean-Air Skyscreens are fitted to each overhead hatch.
Foredeck hatch, anchor locker hatch and cockpit hatches are flush fiberglass.
Saloon style removable companionway doors with storage bag in cockpit locker.
Sailing hardware is Harken or equal.
(2) Lewmar 50 CCEST electric self-tailing primary winches.
(2) Lewmar 46 CCST manual secondary winches.
(2) Lewmar 10" aluminum Powergrip lock-in winch handles.
Lewmar rope clutches.
Varnished teak toe rail and coaming cap.
Custom cast SS bow, midship and stern chocks that integrate beautifully with the teak toe rail.
Varnished teak flagstaff and 60" US flag with SS socket welded to the backstay chainplate.
Varnished teak steering wheel.
Removable teak foot block for helmsman on centerline aft of the pedestal.
Varnished teak cockpit table with leaves and storage cover.
Teak clad foot rest below cockpit table.
Stainless steel deck plates and latches.
Two SS cup holders in cockpit winch pods with drains.
Cockpit drainage meets the minimum requirements of ORC Category 2 and CE Category B.
REMOVABLE STANCHIONS W/SINGLE LIFELINES & GATES
Includes (8) 24" tall SS removable stanchions with round bases and male threaded studs and (8) permanently mounted 3" SS deck plates with corresponding female threaded inserts. Gate braces are added midships port and starboard on both the forward and aft gate stanchions. There is a single lifeline port and starboard. The lifelines between the gates are secured with pelican hooks. The lifelines terminate at folding padeyes on the foredeck and aft near the end of the cockpit along side the toe rail. The lifelines and stanchions can be easily removed and stowed in the canvas bag provided. Each stanchion is stamped on the underside of the threaded plate to identify its position.
ANCHORING & MOORING
(1) Delta 35 lb anchor w/150' of 5/8' diameter Yale Brait with 30 feet of 5/16' chain.
(1) Anchor deployment system w/manually rotating arm and integral anchor roller in foredeck locker.
(1) Lewmar V2 SS windlass with rope/chain gypsy.
(1) Salt water wash down system with SS spigot located in the anchor locker.
(3) Schaefer Herreshoff style stainless steel cleats. (1) 12' at bow and (2) 10' at stern.
(2) Schaefer 8.5'" SS removable cleats midship w/canvas storage bag.
(6) Morris custom cast stainless steel toe rail chocks.
(1) Bow line 30' nylon, 5/8' diameter.
(2) Spring lines 45' nylon, 5/8" diameter.
(1) Stern line 30' nylon, 5/8"diameter.
(3) 10" x 26" vinyl ribbed fenders with 10ft of rope and polar fleece covers.
(1) SS line storage bar in the forepeak locker.
(1) Aluminum boat hook.
Spars & Rigging
Carbon fiber mast and aluminum in-boom mainsail furling system by Liesurefurl.
Aluminum boom has extra bail for attaching a preventer line and light with dimmer switch to provide lighting over cockpit table.
Fractional rig with swept back spreaders.
Navtec stainless steel rod rigging.
(1) Lewmar 30CCST halyard winch.
Self-tacking jib on athwartships curved track.
Harken MKIV Unit 1 manual headsail furling system.
Sailtec SS integral hydraulic backstay adjuster.
Navtec SS turnbuckle covers.
Forespar Yacht Rod Vang
Running rigging is low-stretch New England Rope.
Main halyard 11mm Endura braid
Jib halyard 10mm Endura braid with tag line and six part halyard tensioner
Spinnaker halyard 10mm Endura braid
Masthead flag halyard and one spreader halyard
Main sheet 8mm Sta-Set
Jib sheet 10mm Endura braid
Spinnaker sheets 10mm Sta-Set
Spinnaker tack pendant w/snap shackle
G-0 package with top-down furler and hardware and rope clutch on mast
Karver Gennaker top-down furler
Flush mounted 20W Spreader lights on lower spreaders.
Sail inventory by North Sails includes the following sails:
Soft Norlam Full Batten Mainsail and Liesurefurl Sunbrella Quick Cover.
Soft Norlam Furling Jib with UV protective cover on leach.
Gennaker G-AP2 (larger sail) with Roll-Gen furler.
Paint, Coatings and fairing
Toe rail: varnished teak.
Deck: gelcoat Oyster white with molded tan non-skid.
Hull topsides: Awlgrip - Majestic Blue
Boot top stripe: Single stripe in choice of standard Awlgrip colors.
Hull stripe: Narrow stripe of hull topside color is visible between the boot top and bottom paint.
Bottom paint: Interlux Micron Extra or equivalent.
Cove stripe: Gold leaf
Name & Hail: Gold leaf
Bilge: White gelcoat.
Ultrasuede interior cushions.
Sunbrella cockpit seat cushions with custom backrests.
(4) Adult Type II life jackets with storage bag.
USCG Rules of the Road.
Engine spare parts kit.
Spare bulbs and fuses.
CANVAS PEDESTAL AND WHEEL COVER
Canvas pedestal and wheel cover made by Acadia Sails with heavy duty canvas and Isenglass. (Color: Oyster)
CANVAS DODGER W/SS BOWS, AFT GRAB RAIL
Sunbrella canvas dodger on folding SS bows built by Acadia Sails with heavy duty canvas and Isenglass. The dodger has removable stainless side hand rails(wrapped in Elk Hyde) as well as a stainless handrail on the aft bow. The dodger is mounted with snaps to the dodger dam which extends outward from the companionway and curves gently aft to a point where they reach the transition of the cabin top and cabin sides.
CANVAS DODGER WINGS (2)
Removable canvas wings with a large clear window panel attach to the dodger port and Stb for added protection in the cockpit for offshore sailing. A second set of wings made entirely from canvas are also included.
CANVAS AFT BIMINI
A canvas bimini with folding SS bows mounted over the helm is included. The bimini is made by Acadia Sails with heavy duty canvas. The bimini is supported with nylon tie-down straps fore and aft. The straps fasten to folding padeyes inboard of the stern cleats aft and welded bails on the aft-most stanchions. The bimini has a canvas storage boot with a zipper. The boot has elkhide reinforcement where it rests against the backstay in the stowed position.
Air conditioning and heat
A 10,000 BTU Marine Air conditioning unit is installed with reverse cycle capabilities (heat.)
Custom two-cabin interior
RAISED PANEL PASSAGEWAY DOORS
The sliding pocket doors are built with raised panels painted off-white to match the MC bulkheads. Each door is split at the mid-point with a panel above and below the center door stile. Both the forward and aft sides of the doors have beautiful raised panels.
MC RAISED PANEL BULKHEADS
The bulkheads at the forward and aft ends of the main salon are built with custom raised panels painted off-white. There is a total of (8) raised pan
FWD CABIN POCKET DOORS
The entry to the forward cabin is customized with a pair of double bulkheads that close off the area from the main salon. Sliding pocket doors are mounted between the double bulkheads and not visible when open. The lower edge of the bulkhead is 10-1/2" above the cabin sole creating a threshold that will have to be stepped over when entering the forward cabin. The opening with the doors slid outboard is approximately 28" wide. The forward berth is converted to a Vee berth with a removable insert to create more standing space in the cabin. Drop fronts have been added port and starboard to make best use of the available storage below the berth. When open, the doors are secured by roller locks built into the track system. When closed the port door is secured by flush mounted slide bolts top and bottom. The starboard door has a flush mounted latch that secures the doors together.
RAISED PANEL BULKHEAD IN FORWARD CABIN
The bulkhead at the forward end of the cabin is constructed with (3) large raised panels and painted off-white. The lights are mounted on the outside trim that borders the center panel.
An additional sleeping cabin has been added aft and the head compartment moved forward. The aft cabin has both a reading light at the forward end of the berth and a dome light overhead. The main salon table is a custom design.
STARBOARD PULL-OUT BERTH
The starboard settee has been modified into a pull-out berth. The berth will extend inboard an additional 6" to create a wider berth for sleeping.
MAIN SALON TABLE
A custom removable main salon table is located in the center of the salon. The table is removable so it can be stowed when not in use. The table is supported by it's own removable pedestal. A fleece-lined storage bag is provided for both the table and pedestal tube. The pedestal mounting base is an under-mount style; a small piece of cabin sole plugs the opening in the sole and is barely noticeable when the table are not in place. The table top boasts exquisite marquetry artwork that incorporates a design for both closed and expanded table positions. The removable leaf is cleverly stored inside the table in the most unique fashion.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from Lyman-Morse Boatbuilding Co.
Boothbay Harbor, ME, United States