R I G / R I G G I N G
Southern Spars HM Grand Prix Range Mast Keel Stepped with 3 sets straight, tappered,aero-foil shaped Carbon Spreader swept at a 20 deg angle aft rake, with adjuster to allow +- 5 deg rake
Harken A combination Batt Car / Bolt Rope Track Fitted and Bonded full length.
Halyard Locks on Masthead Spins(2), Genoas(2), Mainsail
Internal Mast Jack in base of mast with custom Swivelling mast base, allowing for 3-4deg of movement
Southern Spars Carbon Fibre / Nomex Core Boom
EC6 continuous Carbon standing rigging with Titanium turnbuckles
Headfoil Harken twin grooved
Southern Spar GAS Vang
Harken GP winch system with MX Pedestal
Pit; Harken 50.2 ST X 2.
Primary; Harken 65.3 TCR UD ST x 2. Carbon pedestal driven. Underdeck drive shafts.
Main; Harken 65.3 ST x 2.
Backstay; Harken 50.2 ST x 2.
Haylard and tack clutches
Spinlock XX012 Rope Clutches x 10. Plus Spinlock line deverters.
Harken Jib sheet override “bars”
Spinlock XCS “spinnaker” sheet clutches x 4.
Spinlock XCS mainsheet “lockoff” clutches x 2.
Enerpac D392 manual Pump for Hydrallic mast jack
All rigging done by Rigworks in San Diego, CA
Sheets and Lines (Rigworks will have tech specifics)
2 sets Jib sheets plus one spare (5 total)
2 sets Spin sheets plus one spare (5 total)
1 spare jib halyard
1 spar masthead halyard
1 misc halyard ( staysail or other)
2 extra strops with bullet for locks.
Misc. Sailing Gear
Harken 10” powergrip winch handles x 2
Harken 12” powergrip winch handles x 4
Antal (14 x 10) Teflon rings with spectra loops and bungee x 4
Antal (20 x 14) Teflon rings with spectra loops and bungee x 4
Antal (28 x 20) Teflon ring with spectra loops and bungee
Equiplite blocks (D 45mm) with spectra loops x 3
Equiplite blocks (D 37mm) with spectra loops x 2
Equiplite blocks (D 30mm) with spectra loops x 2