Interested in this boat?Tel: 1-787-244-9888 ; 1-888-514-7972
View Full Specifications
Price just reduced
San Juan, Puerto Rico
Not For Sale in US Waters
The owner of the “Ay Caramba” spared no expense when creating this one-of-a-kind custom sportfishng yacht. Once aboard, it becomes obvious that attention to detail was a top priority throughout the design, construction, and outfitting of this vessel. Her carefully engineered engineroom does not suffer from a lack of form or function.
Exterior appointments, fishing amenities, and live aboard comforts will exceed guest expectations.
The accommodation plan features a full salon with dinette,4 stateroom layout with a spacious master stateroom with ensuite head, two stacked bunk staterooms, (one with en ensuite head and engineroom access), and a forward VIP stateroom with ensuite head. .spacious cockpit with an air conditioned wet head. The forward VIP stateroom could easily serve as a second master stateroom. Teak appointment the tournament cockpit. A full mezzanine with teak bulkhead, air conditioned, sofa style seating, delivering the ultimate in angler comfort. The “Ay Caramba” is maintained to Palm Beach standards.
Over the past five years, F & S has built several custom sportfishing yachts in the 66’-72’ class.
F & S Owner and Founder, Jimmy Floyd, has incorporated the very best performance and accommodation features of these vessels into the design of the “Ay Caramba”.
All things being equal in power, size, load and sea conditions, no other boat can match F & S. Their secret is a Variable Deadrise Hull design with longitudinal steps. The F & S longitudinal steps are of release rather than pressure design, creating a soft ride. As the hull cuts through waves, there is aeration along the steps. Air is softer than water and in rough going, pockets of air are trapped between the hull and the water's surface by the steps. This contributes to her soft ride and superior performance. F & S is stable at all speeds on any quarter. The multi-keel effect of the vertical surfaces of the steps give unsurpassed directional stability, even while running in large following seas. An F&S hull will run with less wetted surface, less friction and more efficient hydrodynamic lift. The result is a softer ride with breathtaking and efficient performance.
At top speeds, the second step-up panels are the primary lateral stabilizers with a small portion of the chine panels adding secondary support near the transom. When you are really running, her chines may actually be above the water surface! Yet at rest or at slow-troll, the submerged chines and relatively flat outermost panels give great roll resistance, as well as maximum lift for quick planing performance.
Because of the deeply molded-in longitudinal steps, F&S hulls are inherently "stiffer" structurally. Stiff hulls do not fatigue the hull or passengers with the "oil-canning" ride of hulls that flex.
Power is delivered by a pair of Caterpillar C32A Diesels at 1925 HP, delivering a 36 knot cruise speed and a 42 knot top end speed. (with only 850hrs & warranties until 2016 or 4000hrs)
The "Ay Caramba" is not for sale to US Citizens while in US Waters.
Number of single berths: 4
Number of double berths: 2
Number of cabins: 4
Number of heads: 3
Salon and Entertainment System
A large “L” shaped sofa covered in off white Ultraleather is to starboard as you enter the electric sliding salon doorway. The carpet is a light beige that contrasts perfectly with the rich teak cabinetry. The starboard side of the salon features a row of teak cabinets which houses the 46” Samsung flatscreen television, which lifts from its concealed mounting within the marble top for viewing. The row of starboard side cabinetry also houses a Scotsman ice maker, Scotsman wine cooler, custom storage for liquor and wine glasses, and the main electrical service panel.
The remote controlled windows treatments are mounted behind custom teak valances which also serve to hide the air conditioning discharge vents. Rod storage is provided by a custom drop-down locker concealed in the headliner above the companionway threshold. Lighting is provided by overhead halogen units recessed in the headliner. The salon entertainment center is quipped with a Samsung 46” flatscreen television, Oppo Blue Ray DVD Player, Denon Five-Disc CD Changer, Marantz Surround Sound Receivers, KVH Satellite Trackvision with (4) Direct TV Recievers, Leviathan Marine PC with wireless keyboard and mouse, Wireless Internet, and an EMS Sky Connect Satellite Phone. A master Universal Remote LCD touch pad for the custom entertainment system is found in the salon. Additional multi-function remote control units are located in each stateroom.
The “U” shaped Galley is to starboard with a peninsula that serves as both a counter top working space and home for the KitchenAid undercounter refrigerator and freezer units. The forward area of the galley features a double bowl stainless steel sink with Grohe faucet and garbage disposal as well as a four-burner, recessed, ceramic cooktop. Along the the forward bulkhead there is storage above and below the marble counter top with a GE Profile convection microwave oven and Jura Impressa Expresso Machine concealed behind the teak cabinetry above. Flooring is a matte finish solid teak. The Emperador marble contertop on aft portion of the galley peninsula has an overhang with two custom teak bar stools.
An elevated “U” shaped sofa with seating for four surrounds a custom, marble topped, dinette table. Storage is available beneath the sofa base and within the table pedestal. A custom Chris Channell backlit glass mural is set into the forward dinette bulkhead. Deep drawer storage is found within the dinette base.
BELOW DECK MIDSHIP STARBOARD: The master stateroom is located to starboard at the base of the curved companionway stairs. The stateroom is highlighted by a walk around king berth, rich teak cabinetry, tiered ceiling with recessed lighting, a custom etched glass mural by Chris Channell, a cedar lined closet with concealed gun and valuables safe, vanity with built in drawers, under bunk storage, dedicated reverse cycle air conditioning system, deep cabinet storage, and plush beige carpeting. A 37” Samsung flatscreen LED TV is mounted on the companionway bulkhead and the entertainment system is networked into the shipboard system and controlled through a multi-function remote.
Master Head & Shower
Along the forward bulkhead you will find a sliding door entry to the private head and shower. The head features teak flooring, marble top vanity, mirrored medicing cabinet, large walk in shower stall, Techma fresh water toilet, teak cabinetry and moldings, and textured wallpaper.
BELOW DECK FORWARD: A single queen berth arrangement in the forward stateroom, with private head, gives your guests the room and privacy you would want for yourself. Teak cabinetry, rope lighting, and padded hullside panels, give the forward cabin a very warm and rich feel. Like all staterooms aboard, the forward stateroom has a dedicated air conditioning unit.
The aft starboard bulkhead houses a 26” Samsung flatscreen TV. Entertainment components are mounted in the aft upper cabinet, including a Denon DVD Player, and DirectTV HD/DVR Receiver.
A Bomar deck hatch is positioned on centerline over the stateroom entrance. Storage space under the berth is electric actuated, cedar-lined hanging locker, in deep upper hullside cabinets, and within storage drawers at the base of the berth.
VIP Head & Shower
This head features teak flooring, marble top vanity, mirrored medicing cabinet, large walk in shower stall, Techma fresh water toilet, teak cabinetry and moldings, and textured wallpaper.
Guest Stateroom / Port Forward
BELOW DECK MIDSHIP PORT: The port forward guest stateroom also has spacious upper and lower single berths with teak bunk rails, plush carpeting, padded panels to hullside, a cedar lined hanging locker with two drawers below, 21” Samsung TV, and dedicated air conditioning.
Crew Stateroom / Port Aft
BELOW DECK MIDSHIP PORT: The guest or crew stateroom has spacious upper and lower single berths with teak bunk rails, plush carpeting, padded panels to hullside, a cedar lined hanging locker with two drawers below, 21” Samsung TV, dedicated air conditioning, and a stainless steel engineroom access door. Access to the electronics ans storage attic is through a hatch in the stateroom headliner.
BELOW DECK MIDSHIP PORT: This head is accessible from the companway. It features a large shower stall, marble countertop and backsplash, a mirrored medicine cabinet, teak flooring, teak moldings, and and a Techma fresh water toilet.
With air conditioned discharge vents in the bridge overhang, sofa style mezzanine seating, and a stainless steel lined drink box, the anglers fishing aboard the “Ay Caramba” have little reason to leave the cockpit. The cockpit was designed with both comfort and serious sportfishing in mind. Features include teak salon bulkhead, teak covering boards, teak coaming boards, and a teak transom. The custom Release Marine Trillion Series fighting chair has an offset 4” stanchion, adjustable footrest, six rod rocket launcher, storage drawer, seat and back cushions, and a custom chair cover. Concealed beneath the mezzanine deck is a large bait freezer, bait cooler, drink box, and ice chipper discharge bin, all lined with stainlelss steel. Additional fishing appointments include a portside teak tackle drawers, a large transom fishbox (plumbed as livewell), walk-through tuna door, four flush mount rod holders in the coverboards, custom teak step box with storge, fresh & saltwater washdown aprons, recessed exterior lighting, dual 50 amp shorepower inlets, self-draining cockpit, custom stainless steel corner hawse pipes, two 24 volt electric reel outlets, removable dive ladder, four underwarer lights in the transom, and gaff and mop storage lockers. Cleaning supplies are close at hand, but out of the way, in a lift up storage console under the mezzanine step.
Access to the fly bridge is provided by an aluminum ladder on the starboard side of the cockpit mezzanine. The bridge layout consists of a port side helm console with an integrated teak pod on centerline which houses the stainless steel steering wheel and single lever controls w/ bow thruster control in handles. Helm chairs are Release Marine Trillion series, teak with a ladder backs, teak foot rests, removable cushions and 4” polished stainless steel pedestals. The deck finish is applied non-skid.
The helm console features flush mounted electronics behind lift-up plexiglass panels, a 24 Volt sub panel, Fireboy system monitor and manual discharge station, Rupp hydraulic outrigger controls, fuel & water tank monitoring system, and Caterpillar emergency back up controls. The main 12 Volt and 24 Volt bridge electrical panels are located inside the helm console. Access to the interior of the helm console is through a lift-up bench seat forward of the operator’s station.
A drop down electronics box, positioned above and slightly forward of the operator, is fitted with Caterpillar multi-function engine displays, a Simrad autopilot control head, and a pair of Icom VHF radios. Miya Epoch teaser reels, (2) Model US-9 HD and (2) Model US-8, are mounted in a concealed box above, and slightly aft, of the operator’s station.
Bridge guest seating is provided by a “U” shaped wrap-around bench to port, forward of the helm console, and an inline bench, with jump seat to starboard. The port and starboard seating areas offer storage below while the forward seating area, on centerline, conceals a stainless steel lined drink box/freezer. The seating areas have removable cushions, integrated armrests with cup holders, and protective vinyl covers. The helm is surrounded by a custom three-sided enclosure utilizing Costa-Clear see thru vinyl with white Stamoid binding. Bordering the aft portion of the bridge is a welded aluminum belly band with six rod holders. Covering the helm area is a cored fiberglass hardtop housing recessed multi-function lighting
The “Ay Caramba” is fitted with a full aluminum pipe frame Palm Beach Towers brand tuna tower. The tower features a molded fiberglass hardtop curved pipes with the latest design, standing platform, and buggy top. Three LED spreader lights are molded into the underside of the tower standing platform to illuminate the cockpit and foredeck. USCG approved LED Navigation lights are flush mounted in the hard top, on the underside of the tower helm console, and on top of the buggy top.
The upper control station has a padded backrest, stainless steel steering wheel, Caterpillar single lever engine controls, Caterpillar multi-finction display panels, Icom Command Mic port, bow thruster joy stick, a Ritchie flush mounted compass, and two overhead, flush mounted, lights. The port side of tower helm station features a concealed, gasketed, electronics box which houses a Furuno NavNet 3D multi-function display, Furuno RD-30, Bennett trim tab controls, engine stop buttons, and a horn activation button. Mounted to the forward section of the standing platform is a locker containing a freshwater washdown apron. A dual trumpet Kahlenberg air horn is mounted to the starboard side of the standing platform. Rupp hydraulic, four-spreader, aluminum outriggers are mounted to the tower structure, bridge wings, and gunwales. A Rupp center outrigger rigger pole is mounted on the underside of the tower standing platform.
Engine Room / Mechanical Equiment
Main engines aboard the “AY Caramba” are a pair of Caterpillar C32As delivering 1925 HP each. The engines sport the optional Caterpillar chrome accent package, block heaters, and the full engineroom gauge package. Entrance to the engine room is through a concealed lift-up hatch on the mezzanine deck or through a stainless steel man door in the aft portside stateroom. Mechanical spaces, bilges, and engine beds are faired and painted with Awl Grip paint to make maintanance and clean up very easy.
The pair of Onan 21.5 KW generators are mounted near the aft bulkhead. An 18 gallon reserve oil tank is mounted forward, on centerline. In addition to an extensive list of standard mechanical equipment, the engine room is home to many optional systems added to enhance long range cruising and offshore fishing capabilities of the vessel. These systems include a high capacity Racor fuel filtering system while transfering fuel to main tank, a Reverso recirculating fuel polishing system in main tank, a stand alone RCI fuel/water seperator before main engine Racors, FCI 1200 GPD watermaker, Eskimo E600 ice maker, Reverso oil change system, Caterpillar back-up controls, trolling valves, AGM batteries, raw water supply and discharge manifold system, redundant raw water pump, redundant fuel transfer pump, SnapOn tool chest with vise, engine room cameras, Willy wet vacuum, Scantron ultraviolet light water purifier, Brownie’s dive compressor to fill 4 scuba tanks at the same time and air supply in cockpit for up three divers , Livos thermostat controled air intake/discharge ventilation, SeaStar hydraulic steering, Bennett recessed trim tabs, redundant Headhunter Mach-5 freshwater pump, and a Side Power bow thruster. Virtually all shipboard mechanical and electrical systems are is monitored by a custom Maretron network viewable at multiple stations aboard the vessel.
Large Offset Release Marine Contour teak Fighting Chair with 5 rod holder rocket launcher with tray and drawer.
Four Spreader Rupp Big Rigs with Hydraulic layout arms
Four bolt-less Rod Holders in the Covering Boards
Two Rod Holders on each Aft Tower Leg
Six Rod Holders on AftFlybridgeTowerRail
Eskimo E-600 Ice Maker w/ Stainless Bin
FCI 1800 GPD Water Maker
Caterpillar Trolling Valves
Large Transom Fish Box Plumbed as Baitwell
Teak Tackle Center Drawers
Custom actuated Rod Storage in Salon Headliner
Bait Freezer – Stainless Steel Lined
Bait Cooler with Stainnless Steel Tray
Tackle Storage under Salon Sofas
Large Walk Thru Tuna Door
(4) Programable 24 Volt Miya Epoch Electric Teaser X-8 / X-9HD Dredge Reels
(4) DeepSea HID Underwater Lights
Two 21.5 kw Onan Diesel Generators
Salon Main Electrical Panel – AC/DC with
Amperage and voltage metering, sliding gate shore generator selector system, and bilge pump controls.
Two ISO Boost Transformers
Flyridge Electrical 12 & 24 Volt Sub Panels
Companionway 24 Volt Sub Panel
Fresh Water and Fuel Tank Level Gauges
Heavy Duty Marine AGM 24 Volt Battery Banks in custom fiberglass battery boxes
VoltMaster 24 Volt Battery Chargers
Battery Parallel System
Two 120/240 Volt 50 AMP white Shoreline Cables
AC/DC Lighting Throughout the Vessel
Electronics & Navigation Equipment
(3) 17” KEP Black Box Networked Monitors
Furuno NavNet 12KW – 72 Mile HD Radar
Furuno NavNet 3D GPS/Plotter
Furuno NavNet 3D Sounder
Simrad AP-2803 Autopilot
(2) ICOM IC-M604 VHF Radio
(2) 16’ Comrod VHF Antennas w/ Rupp Mount
KVH HD M7 Satellite TV System
Sirius Satellite Weather System
Fusion Sound Systetm with JL Speakers
Iridium Satellite Phone
ACR Spotlight with Remote on Bridge
Paradox Marine Security & Monitoring System
Bow Thruster with Controls at Bridge handles
and atTower Helm Station
LED Spreader Lights (1) Fore and (2) Aft
Maretron systems monitoring system
Furuno NavNet 3D 8.4” Networked Display
Furuno RD-30 Display
ICOM VHF Radio Command Mic
Caterpillar Single Lever Controls
Caterpillar mini Engine Gauge Displays
Bow Thruster Joystick
Trim Tab Controls
Kahlenberg Dual Trumpet Air Horn
Other Features & Equipment
The “Ay Caramba” has a solid teak toe rail runs the entire parameter of the deck. Additional features include a custom removable stainless steel anchor pulpit with roller, Muir windlass with bow foot controls, fresh water washdown in the forward anchor locker, solid 1” stainless steel rub rail and chaff strips, Delta 60Lb. stainless steel anchor.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Owner's personal items, dive equipment, tools, EPIRB, liferaft, first aid equipment and fishing tackle are excluded from the listing and will not be included in the sale of the vessel.
Interested in this boat?Tel: 1-787-244-9888 ; 1-888-514-7972