Bondway Yachts Centurion 108.

Additional Specs, Equipment and Information:

• 220AC 50HZ and 24/12V DC electrical control panel with individual circuit breakers
• 12V, 24Vand 220Vanalogue amp meters and voltmeters
• 1 x transformer 220V-12V
• Twin hull plug and hull fitting (2x 50amp)
• 60' of 60 amp shore cable
• 6 x data outlets and cabliing
• All 12V-220V electrical cable and 12V-220Vlights and switches (Clipsal 3000 series)
• Exterior weather proof down lights, Cantalupi
• Cantalupi LEDstep lights
• 16 sets under water lights
• 1 x TV antenna (12V/220V) and 2 Tv/FM indoor sockets
• Telephone: 2 hull plugs: 1 fax line with 1 indoor socket and 1 telephone line
• With 3 indoor sockets
• Halogen overhead ceiliing lights
• 220V AC rope lighting
• Automatic wardrobe lights
• Twin banks of 24V DC 200 amp-hour batteries for main engine starting and ship service
• 24V DC battery charger for generator starting
• Navigation light control and monitoring panel
• Alarm monitoring system with audible and visual signals for high bilge level and smoke detectors
• Security alarm sensors on all doors and hatches
• Battery parallel system
• 12V DCbattery for electronics
• Copper bonding system

• Twin Caterpillar C15 Acert 800 HP, fresh water cooled diesel marine engine, electronic injection/governor, ZF Marine reduction gearboxes, standard engine instrumentation, 24V DC starting
• Electrical and manual engine starter
• Onan generator 17kw and 27kw
• Wesmar 40 HP bow thruster
• 2 x Maxwell capstans 24V
• Wesmar hydraulic windlass Wm3500
• FM200 fire protection system, consisting of manually and automatically actuated fire extinguisher system with audio and visual alarms
• Marine air reverse cycle direct expansion air-conditioning throughout
• ZF marine electronic engine control system
• Racor fuel filters for main engines and generator
• Fuel management system consisting of Reverso DP-15-03 15GPMfuel transfer pump and Reverso 150GPH Racor fuelpolishing equipment
• Groco raw water strainers for all main engines and sea water intakes
• 304 s.s propeller shafts
• Nickel aluminium bronze propellers
• Stainless steel rudder blades
• Drip trays under engines
• Engine room ventilation
• Automatic/manual control Rule 1500gph bilge pumps for each bilge space

• Hull - solid hand laid GRP
• Superstructure - aluminium box frame with structural glass 8mm tempered safety glass
• Bulkheads and partitions - solid hand laid GRP
• Foam cored panels/marine ply
• Decks - solid hand laid GRP

• Twin helm stations
• Furuno radar/GPS/chart plotter: Furuno 1944C Navnet Vx2 radar/GPSplotter. GP 320B GPS receiver antenna unit W/10M cable. Furuno 10.4" colour display unit. 6KW 4' open antenna with 15mcable
• Furuno wind/boat speed/depth equipment: F150 data system with display, speed/depth/temp sensor. Furuno ETR-6/10N depth sounder with MSD transducer
• Furuno VHF marine radio: Furuno FM2721 marine VHF radio. Comrod 4'VHF antenna with mounting and 15m cable.
• Furuno autopilot: Furuno navpilot-500 autopilot c/PG-500 compass. Lecomble and Schmitt RV-2-12V DC2.0L/min pump set. Navnet NMEA cable 5m (for autopilot interface). Furuno navpilot-500 autopilot c/PG-500 compass. Lecomble and Schmitt RV-2-12V DC2.0L/min pump set

• Hydraulic lift-up swim platform
• Tender rib 5.2m center console
• 25 HK Mercury outboardengine
• 80kg CQR anchor
• 100m 14mm galvanised anchor chain
• 10 x 12"fenders with ropes
• 8 x 60' mooring ropes
• Mooring hook
• Boarding steps in GRPwith teak treads and step-lights