- View Full Specifications
High spec alloy bluewater boat
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Flensburg - Germany, Germany
- Hull Material:
- Current Price:
- EUR 950,000 Tax Paid (US$ 1,017,355)
Quite possibly the smartest and most capable sailing yacht on the planet! Built in 2006 to take on all of the world’s oceans in absolutely safety and comfort, she still offers sparkling sailing performance. MARLIN is truly unique and an exciting opportunity now exists to take ownership of this sparkling red-hulled thoroughbred and embark on new world-girdling adventures.
MARLIN is a Robert Perry designed aft cockpit pilots saloon cutter, built in aluminium by one of the very best names in the business – Yachtbouw Folmer in Holland. Launched in 2008, she was designed specifically for the most demanding blue water adventures in both hot and cold climates. With a multitude of collision bulkheads, she is virtually unsinkable, yet through clever design and design specification, she remains an enjoyable and nimble yacht to sail – something that is often left out when configuring expedition yachts such as this. Her owner reports that she will easily sail at up to 8 knots to windward, 8-9.5 knots on a reach and 7-8 knots downwind. She has also seen 16 knots on the log surfing in heavy seas.
With over 60,000 miles under their belts, the current owners and their young family were most of the way through an audacious circumnavigation started in 1999, taking in Cape Horn, Antarctica, the Pacific and South Africa aboard their steel-hulled Scorpion II ‘IRON LADY’ before coming across MARLIN in Suriname in 2012.
Since taking ownership of MARLIN, her new owners have comprehensively worked through every system and element of her structure to get her 100% ready for further adventures. They are now coming towards the end of their lifetime adventure so it is time to find MARLIN a new custodian to take full advantage of her enormous capabilities.
MARLIN is an aluminium cutter-rigged pilothouse sloop equipped as Expedition Ship for high latitudes. The ship security certificate is issued by the SeeBG for worldwide travel. She has a moderate long keel with 8,000kgs of ballast and only just above two meters draft. She was built according to CE directives and Lloyd's standards in 2006 by the famous Folmer shipyard in the Netherlands.
Five watertight sectors divide the 18m yacht: Forepeak, Master Cabin with watertight door made of aluminum, salon and aft berths, walk-in engine room, and lazarette for provisions and equipment.
MARLIN is clearly distinct from the GRP charter boats through the use her internal space. Normally, a yacht of this size would be crammed with ten plus berths with the guests stacked like sardines like. MARLIN is actually designed for 6 people (although she will sleep up to 9 through use of settee berths in saloon and raised pilothouse). The engine compartment is separated from the living space which helps to insulate the cabin spaces from noise. Storage space in the forepeak, stern and deep bilge blank space for equipment and food sufficient for several weeks at sea.
Marlin’s spacious pilot house has evolved during sailing as a central lounge for the on duty crew while on watch. In high latitudes it is warm here and it is protected from rain, snow, ice and cold. In the tropics, the pilot house provides the pilot house provides shadow and a pleasant breeze at anchor. When sailing you have a view of the horizon, which makes you forget seasickness.
"Here one can dance!" Said one of my sailors when he came into MARLIN’s salon of MARLIN. With 2.1m headroom throughout, this is the centre of MARLIN’s community and where the food is eaten. Good food is writ large aboard MARLIN and her excellent working galley is testament to this. The lower saloon space is also where important work is done with two navigation tables, computers, communications equipment etc
We have a heated closet where wet sailing clothes we dried. The aft heads is located amidships and acts as ideally-placed day heads plus services the two aft cabins which are equipped with a total of four berths. These cabins are the quietest place at sea. The master cabin is forward. This spacious cabin has an open forward hatch provides good ventilation in tropical travel zones. Forward of this is a an ensuite heads and a spacious shower in the forepeak..
Robert Perry - We did two designs for this European client, and while both boats are very similar in size, over time his choice of preferred features changed. This boat is built with aluminium at the Jachtbouw Fulmer yard in the Netherlands. We worked closely with our Dutch contact Marinus Meijers to coordinate the conversion from our computer drawings to computer 3-D models to allow the entire structure to be nested and precut. The result to my eye is a work of art, all shiny in aluminium prior to sandblasting and highlighting the skill level that has made the Dutch aluminium yards famous.
The target for this design was a fast, seakindly, all-weather offshore cruiser for a family of five.
The hull form is narrow with an L/B of 3.52 and the D/L is 166. The sections show a soft, arclike shape with low wetted surface. The half angle of entry at the DWL is 15 degrees and at the deck it is 19
The aluminum construction features a skin thickness of 7 millimeters to just above the DW where it
increases to 8 millimeters. The keelshoe is 20 millimeters. This is very durable construction. It’s also easier to get a fair hull when you work with plating more than a quarterinch thick.
Of course I like this boat. I designed it along with the help of Ben Souquet, my right-hand man, and Marinus Meijers. I think it may represent one of the nicest boats I have designed.
- MARLIN is CE certified for category A - OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above, and vessels largely self-sufficient.
Hull, Deck & Superstructure Construction:
- MARLIN ' is built as a true seagoing yacht, equipped for the longest offshore voyages. She is built to a quality design, and constructed from first-dass materials throughout. Her round-bilge hull has been built to Lloyds standards by well renowned builder Folmer in Rijs -Holland.
- Seawater resistant Almg 4.5 Mn W28 aluminium construction.
- 7mm thickness hull topsides
- 8mm thickness beneath waterline
- 20mm thickness at keel shoe
- Fully round bilge hull profile, epoxy filled, sanded, primed and spray-painted red with contrasting white waterline stripe and style-line
- Transverse hull framing
- Five watertight bulkheads – Ahead of forward shower, forward of saloon, aft of guest cabins, ahead of engine space, and aft of engine space.
- All stainless steel used in 304 of superior.
- The hull and decks, above the waterline are additionally insulated with PU foam.
- Raised pilothouse with laminated glass windows installed in an aluminium frame
- Raised bulwards with fairleads
- Super structure and decks painted off-white
- Decks and cockpit finished in contrasting non-slip
Keel & Rudder:
- Fixed keel with internal lead ballast – Long in profile for directional stability at sea and also to allow drying out
- Aluminium rudder blade supported by full-depth skeg
Engine & gearbox:
- Yanmar 4LHA-HTP four-stroke inline turbo-charged marine diesel engine producing 160hp (118kw) at 3,300rpm.
- ZF reverse reduction gearbox
- Mechanical single-lever throttle/gear control
- Indirect fresh water engine cooling via heat exchange
- The exhaust is water-cooled by injection of the cooling water from the engine.
- Twin fuel water separator / filters
- Natural aspiration for engine room ventilation
- Engine and gearbox flexibly mounted to reduce vibration
- The engine room is insulated with a flame retarding foam insulation.
Maintenance & Performance:
- Engine hours: Approximately 2,100 hours as of August 2016
- Date of last engine service: August 2016
- Cruising speed: 6.6 knots @ 2,200 rpm
- Maximum speed: 9.9 knots @ 3,300 rpm
- Range: approx. 1,500 Nm
Propulsion & Steering:
- Steering pedestal with hide-covered stainless steel helm wheel
- Mechanically operated Jefa steering system
- Emergency steering gear
- Stainless steel prop shaft
- Aquadrive coupling
- Water-lubricated Volve Penta shaft seal
- Maxprop 3-bladed feathering propellor
- 24v domestic system with 12v starting banks and 220vAC via generator, shore power or inverters
- 12vDC maintenance free engine start battery
- 12vDC maintenance free generator start battery
- 12vDC maintenance free dedicated battery for VHF/HF and AIS
- 8x 12vDC Northstar AGM service batteries joined in parallel and series to supply 400ah @ 24v – New 2013
- Battery monitoring system at chart table
- 2x VICTRON 70A Multilader and Inverse 3000W / 24V / 220V combi charger/inverters
- Mastervolt DC/DC 24/12 V converter and battery charger for 12V battery subsystem - New 2013
- Fischer Panda 4KW / 24V diesel generator - New engine in 2013
- Generator hours – approx. 1,100 as of August 2016
- Date of last generator service – August 2016
- Superwind 350 / 24V Wind Generator - New 2013
- Four solar panels a 100 watts on the device carrier - New 2013
- High power 24v alternator 130Amp / h on main engine - New 2013
- BALMAR high-performance controllers - New 2013
- Separate 12v alternator for starter batteries engine and generator
- Galvanic isolation transformer Shorepower
- 220V in owner's cabin, saloon, chart table, kitchen, pilothouse, engine compartment
PLUMBING & GAS SYSTEMS
- 24vDC pressure system with accumulator tank for hot and cold fresh water.
- Calorifier tank for heating water via engine, via Webasto heating system or with 220vAC element from shorepower or generator
- ECHOTec watermaker 120L / h at 24V DC motor - New 2013
- Watermaker hours: approx. 1,000 as of August 2016
- Date of last watermaker service – July 2016 (seals replaced)
- Each compartment has his own Hand Bilge pump
- Main manual Pump next to steering wheel. Changeable from Engine room, main salon, front cabin.
- Electrical Bilge pump front cabin with level switch
- Electrical Bilge pump centre salon with level switch
- Electrical Bilge pump grey water tank with level switch
- Two 11kg LPG gas cylinders have their own gas box with cross and can be shut off from the outside and via shut-off adjacent to stove
- Gas system tested and certified - 2014
- Sea-chest with one through-hull skin fitting and seawater manifold system supplying engine, generator, heads, deckwash and spare.
- Ball-valve seacocks
- 1,500 litres in two 750 litre fuel tanks, independently connected
- 150 litre day tank taking feed from either fuel tank via manifold
- Manual tank gauges at chart table
- Sight gauge on sides of day tank
- Odour filter for tank vents
- 1,200 litres in two 600 litre tanks
- Manual water tank gauges at chart table
- Flow meters
- 2x 110 litre blackwater holding tanks with deck outlet or drained overboard by gravity
- Blackwater tank level gauge
- Odour filter for blackwater tank
- Greywater holding tank fed via forward and aft collecting tanks
NAVIGATION & COMMUNICATION EQUIPMENT
- Raymarine ST60 wind, speed, depth and log displays in cockpit with transducers
- Raymarine autopilot control head connected to Lecomble & Schmitt Linear Drive autopilot switched to Jefa - New 2013
- Jefa rudder control
- Raymarine Tridata and Multidata displays at the chart table
- Furuno GP32 GPS at the helm, all data on Seatalk and NMEA networked with the BoardPC - New 2013
- Furuno Radar NAVNET
- On-board computer with a fixed 22-inch LED Monitor at the chart table. Worldwide maps under OpenCPN - New 2013
- CLASS B AIS transponder. The AIS system also has a built-in anchor watch and serves the safety of the crew particularly as receiver for ELTs that are integrated at all lifejackets
- Binnacle steering compass
- ICOM M323 DSC VHF fixed installation - New 2013
- 2x ICOM M72 VHF Portables - New 2013
- ICOM M802 with AT 140 and PACTOR 4, DR7800 - New 2013
- Shakespeare Whip Antenna 23 '- New 2013
- Iridium GO! Satellite phone/wifi hotspot system
- LunaWLANet High Gain WiFi Antenna for use in marinas and anchorages connected to WLAN router
- Twin stainless steel sinks with hot & cold pressurised fresh water supply.
- Manual salt water supply at galley
- Force 10 3-burner gimballed gas stove with oven & grill
- Fridge - 24vDC
- Freezer – 24vDC
- Washing machine
- Electric heads in forward heads compartment
- Manual heads in aft heads compartment.
- Hot & cold showers
Heating & Ventilation:
- Webasto 9kw diesel-fired central hot water heating installed in engine room- New 2013 equipped and radiators in the wet areas plus saloon radiator installed 2014
- 24vDC fans.
- Ventilation consisting of opening skylights, dorade ventilators and portlights.
- 12v bulkheads lighting throughout with ample overhead lights and reading lights at settees and berths.
- Warm LED lighting around saloon table
- Lights over work area in galley.
- Chart lamp in navigation area.
- CD/Radio with stereo speakers in main saloon, plus further independent system for cockpit.
Summary of Accommodation:
- Up to nine berths in three dedicated sleeping cabins with master cabin forward and two aft guest cabins. Ensuite heads for master cabin and shared heads for aft cabins and day-heads usage. Lower saloon with occasional settee berth, galley and chart table areas. Raised pilothouse area with seating/occasional berths and 360 degree outward vision.
- The first class interior is handcrafted in American Cherry, and varnished to a satin finish.
- The isolated moulding above the berths is lined in mahogany.
- Flooring of varnished teak plywood with holly inlay.
- Headlining of white vinyl covered panels with mahogany strips.
- Latex mattresses for master cabin with sprung slats
- Blue cloth upholstery in saloon
- Laminate counters in galley
- 2.10m headroom throughout interior
Description of Accommodation from Forward:
- Bulkheads and lockers in white laminate.
- Laminate soles.
- Wash basin and countertop in laminate
- Dedicated shower cubicle forward with hot & cold water supply
- Electric flush marine heads
- Cupboards above heads
- Ventilation through opening deck hatch
- Large offset double berth to port.
- Stowage in shelves and lockers above and outboard to starboard.
- Stowage beneath berth
- Access to ensuite heads forwards
- Ventilation via opening deckhead hatch
- Large U-shaped settee to port
- Lockers and shelf stowage outboard and forward
- Large fixed dining table
- Ample bookshelves and cupboards.
- Secondary chart table and additional stowage aft and ahead of aft heads.
- The navigation area is located opposite main saloon on starboard side
- Large chart table areas fore and aft with swivel seat between
- Stowage for charts.
- Ample space for individual instrumentation and modern navigation equipment.
- The galley is located amidships starboard side.
- Large work areas in easily cleaned and durable laminates.
- Stowage for groceries.
- Cupboards with fiddles for plates, cups and glasses.
- Stainless steel crash bar
- Aft of saloon to port.
- Manual marine heads
- Aft of galley to starboard
- Dedicated shower cubicle with hot & cold pressurised water supply
- Mirrored cabins to port and starboard
- Upper and lower bunks
- Hanging lockers
- Ensuite sinks
- Access to engine space
- Seating to port and starboard with cushions
- Chart counter to starboard
- Removable table
- Door access to aft cockpit
- Hall spars white painted aluminium alloy spars
- Keel-stepped mast with two sets of spreaders Spreader keel stepped mast.
- Full time cutter rig.
- Stainless steel wire standing rigging (2008 – lower shrouds and tongs replaced by Hall Spars - 2014)
- Profurl manual genoa and staysail furlers
- Ronstan ball-bearing battencars for fully-battened mainsail system
- Checkstays and jumper struts to stabilise rig in heavy seas and whilst using staysail
- Holmatro hydraulic backstay
- Rigid boom vang
- Adjustable mainsheet track on coachroof
- Bulwark mounted genoa tracks
- Coachroof mounted jib tracks
- Control lines led aft to cockpit jammers
- Mast-mounted white painted carbon-fibre pole for poling out genoa
- Line-tender for spinnaker track on mast
- Andersen winch package consisting of:
- 2x 2-speed electric self-tailing primary winches in cockpit
- 2x 2-speed manual self-tailing checkstay winches in cockpit
- 2x 2-speed manual self-tailing control line winches in cockpit
- 2x 2-speed manual self-tailing halyard winches on mast
- Rolly Tasker Sails - New 2013
- Dacron fully-battened mainsail 92.7 m²
- Dacron furling genoa: 88.4 m²
- Dacron furling Jib: 37,10 m²
- Dacron storm trysail: 14.9 m²
- Dacron storm jib: 13.5 m²
- Nylon gennaker with snuffer 220 m²
- Stainless pulpit and pushpit.
- Mid ship gates.
- Bow stern and mid ship cleats.
- Removable boarding ladder at stern.
- Aft radar tower
- Stainless steel aft gantry for bimini, solar panels and wind generator
- Teak grating for cockpit sole and inside pilot house
Anchoring & Mooring:
- 70kg Rocna primary anchor with 80m of 13mm calibrated chain – New 2014 and both V4A stainless steel
- 27kg & 15kg Plough secondary anchors
- Lewmar 24vDC capstan electric anchor windlass with remote control at foredeck
- Warps & Fenders
Tender & Outboard:
- NAIAD 3.5m aluminium bottomed RIB tender registered in New Zealand as legal-liferaft - New 2013
- Dinghy carries 6-7 people with 30hp Yamaha outboard
- Tohatsu 3,5PS outboard engine - New 2013
- 12L aluminium diving tanks INT, BCD, automatic, pressure and depth manometer – not warranted
- Various diving goggles and fins
- 2x Paddleboards 2016
- 1x Kite Board 142
- 1x 14 m2 Kite with board
Covers, Cushions & Canvas:
- Grey acrylic canvas stackpack for mainsail with lazyjacks
- Blue acrylic canvas bimini
- Cockpit cushions
- LED Aqua Signal navigation lights.
- Viking 6-man canister liferaft on cradle at aft end of cockpit
- 406Mhz EPIRB
- S4 SART
- 2x horseshoe buoys with lights
- Danbuoy with light
- Jackstays along sidedecks
- 6 tested and proofed life jackets with lights and personal AIS transmitters
- Fire Pro automatic engine room fire extinguishing system
- Fire extinguishers throughout interior
- Additional fire extinguishers in lazarette storage space
Fire blanket close to galley plus extinguisher for burning fat/oil.
Lying Horta - Azores
Available to view strictly by appointment
Office Hours Mon- Fri 0900 – 17.00
Saturday by prior appointment
For more information or to arrange a viewing please contact us.
Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.
Tel: +44 (0)1590 673715 Email: email@example.com
Please contact Alex Grabau at +44(0)1590 673715
Additional Specs, Equipment and Information:
Builder: Jachtbouw Folmer
Designer: Robert Perry
Flag of Registry: Germany
Hull Shape: Monohull
LOA: 18.26 m
Beam: 4.66 m
LWL: 16.44 m
Minimum Draft: 2.13 m
Maximum Draft: 2.13 m
Displacement: 26600 kgs
Ballast: 8636 kgs
Total Power: 160 HP
Engine Brand: Yanmar
Engine Model: 4LHA-HTP
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 2100
Propeller: Folding propeller
Drive Type: Direct Drive
Engine Power: 160 HP
Cruising Speed: 6 knots @ 2200 RPM
Maximum Speed: 9 knots
Fresh Water Tanks: 2 Aluminum (600 Liters)
Fuel Tanks: Aluminum (1650 Liters)
Holding Tanks: 2 (110 Liters)
Number of single berths: 3
Number of twin berths: 2
Number of double berths: 1
Number of cabins: 3
Number of heads: 2
Number of bathrooms: 2
Wind speed and direction
Fully battened mainsail
Electric bilge pump
Manual bilge pump
Fresh water maker
Shore power inlet
Electrical Circuit: 24V
Total Liferaft Capacity: 6
Grabau International offers the details of all vessels in good faith but cannot guarantee or warrant the accuracy of this information or warranty the condition of any vessel and the details do not constitute a part of any contract. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. All vessels are offered subject to prior sale, price change, or withdrawal without notice. Grabau International provides professional yacht conveyancing and legal transfer of title for all yachts as per the ABYA Code of Practice with all deposit payments and final balance payments processed through secure dedicated client accounts solely for that purpose. Our dedicated client accounts are written in trust at Natwest Bank and we are fully insured.
Other Boats from Grabau International
63 Pilot Cutter
V62 Mills Prêt-à-Porter
Marten V65 Fast Cruiser
La Spezia, Italy