An opportunity to own a half share in, arguably, one of the most unique and best examples of the multi-award and championship winning Beneteau First 44.7. Launched in May 2006, from her honey colour teak decks to her unique Corinthian Blue hull "Sacre Bleu" oozes style, comfort and an ability to stand out from the crowd. Whether you wish to cruise with style, speed and comfort or annoy the out and out racers by crossing the IRC line first, this 44.7 will give you the ability to fulfil your desires.
Price is for a half share in this boat. The owner of this boat will also consider a third share at $85,000 or full share at $250,000.
Please contact exclusive agent YOTI to discuss ownership options for this boat and arrange an inspection at The Spit today.
Yoti was founded in March 2008 and exists to provide an alternative sales platform for the yachting community. We specialise in production and semi production yachts with a team of employees vastly experienced in yacht sales, both in Australia and Internationally.
We are located at The Spit on stunning Middle Habour, Sydney; approximately 30 minutes from Sydney Airport.
Yoti Smiths Boatshed Marina The Spit Mosman NSW 2088
Phone +61 (0)2 9960 6222
Please contact John C Cowpe at +61 (0)405 409 686
Additional Specs, Equipment and Information:
Builder: Beneteau Yachts France
Designer: Bruce Farr, Farr Yacht Design
Hull Shape: Monohull
LOA: 44 ft 11 in
Beam: 13 ft 1 in
LWL: 37 ft 9 in
Minimum Draft: 8 ft 7 in
Displacement: 9200 kgs
Dry Weight: 21572 kgs
Number of cabins: 3
Number of heads: 1
Number of bathrooms: 3
Teak over Balsa Cored GRP
Three cabin. Owners cabin fwd features offset pullman berth with settee opposite and private ensuite head and shower fwd. L-shaped galley to stb, saloon seating fwd with seating for 6-8 people. Servery and additional storage opposite to port.
Fully equipped galley with LPG oven and two burner stove. Twin stainless sinks served by pressure and manual water. Top opening 12V refrigeration upgraded to the Frigoboat S2000. Beneteau crockery and cutlery.
Cat 7 AYF
Electronics / Navigation
VHF, Stereo, full Raymarine networked set-up with wind, speed and depth readouts in cockpit as well as a triple readout on mast. Raymarine C80 plotter, Raymarine 6001+ Autopilot.
All Racing sails by Ian Short as follows:
1. Carbon Mainsail with bolt rope. Mast main sail track modified to take bolt rope or sliders (cruising main sail) 2. Carbon No 1 Light the sail that set the 44.7 apart when in light airs - up to 10 knots 3. Carbon No 1 Normal large overlapping sail, lots of power and requires full rail crew 4. Carbon No 1 Heavy (No2) 5. Carbon No 3 Enables the 44.7 to handle easily in heavy weather 6.0.50oz Masthead light spinnaker 7.0.75oz Masthead Spinnaker 8.1.25oz Hounds Spinnaker 9. Storm jib (used once) 10. Dacron main and #2 genoa for cruising/delivery
Mast / Rigging
Twin swept spreader fractional IRC rig, extended Carbon spinnaker pole with upgraded beak. Doubled main halyard.
Upgraded primary winches, 16:1 ratio genoa cars, cunningham downhaul, and reefing gear. 2.5M inflatable tender.
IRC Optimization Modifications include -
1. Keel Shoe Fitted - Only the first few 44.7s in Australia had the 2.64m Draft as shown in the Brochures. Thereafter, Beneteau supplied the 44.7s with approx 100mm shorter keels. Subsequently, racing 44.7s had a 100mm x 100Kg Keel Shoe fitted to return the boat to it's original Farr Design. This Keel Shoe gave the advantage of having another 100Kg AT THE BOTTOM of the keel (equivalent to 3-4 extra rail crew) with no IRC penalty. Keel Shoe was fitted in 2009
2. Extended Spinnaker pole with up-graded beak - The spinnaker pole was extended to match the Ian Short manufactured fuller masthead spinnakers and the beak was changed to a more substantial unit
3. Main Halyard doubled - 44.7s are is supplied with a single main halyard. Under stress the halyard tends to slip in the clutches. The doubling of the halyard halves the load on the clutch and stops this frustrating problem.
4. Doubling up of cars and applying 16:1 adjustment. The 44.7 is supplied with one car each side and a single sheet back into the cockpit. The single car makes sail changes more awkward and the single sheet can only adjust the cars by using the winch when they are under load. The 16:1 adjustment allows critical trimming car adjustments to be made by hand.
5. Cunningham Adjustment - Normal Cunningham adjustment on 44.7s is made at the mast and can be difficult to gain the purchase require at this point with such a thin sheet. Cunningham adjustment back in the cockpit through a cabin top clutch making the adjustment easier, safer and with the local cabin top winch on hand if needed
6. Normal Reefing on supplied 44.7s is at the mast and can be difficult in poor weather. Luff reefing line down the port side through a clutch into the cockpit and a foot reefing line down the starboard side through a clutch to the cockpit. Hence, the first reef can be put in from the cockpit with independent tension at the mast/luff reefing point and leech reefing point
7. Additional pad eyes have been fitted to allow the Spinnaker Sheets to come back on themselves and reach the cabin top winches on the same side. Otherwise, the sheets have to cross the cockpit to the opposite cabin top winch making Spinnaker gybing more difficult as the starboard spinnaker sheet is on the port side cabin top winch and vice versa
8. Vang cleats have been moved and upgraded to swivel cleats to enable the rail crew to hold and operate the vang from their rail position
Owner will consider trade or half-share purchase.
Manufacturer Provided Description
The feedback provided by over 550 owners of the First 40.7 has been instrumental for Farr Yacht Design and the Beneteau Design Team to create the NEW Beneteau First 44.7. The First 40.7, designed by the same team, is a world best seller with a record of race titles, including an IMS World Championship. Her success is not due to race results alone. The 40.7 offers rare versatility, outstanding value, and consistently high resale value as will the NEW Beneteau First 44.7.