- View Full Specifications
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Hull Material:
- Current Price:
- EUR 1,600,000 Tax Not Paid (US$ 1,795,360)
The hull shape, drawn by Javier Soto Acebal, is designed with ultimate speed in mind. It is a good, quick, racing orientated hull.
The Aiken 62 benefits from 'Sprint' construction techniques for both hull and deck. One of the advantages of 'Sprint' is its large strength to weight ratio, which enables the hull to be built not only lighter, with very large safety margins, making the Aiken 62 capable of coping with the worst of sailing conditions.
The Aiken 62 will be extremely comfortable and capable of berthing six people in luxury. Under racing conditions, double that number may be berthed if the central cabin is brought into use.
With hull shape and rig configuration carefully controlled, the Aiken 62 can expect to enjoy the same close One-Design style racing that has typified the Aiken contests.
Aiken Yachts wants owners to be able to specify the yacht to their own preferences, therefore there are a number of internal layout options and in terms of deck layout, Aiken Yachts will offer an open cockpit and a bridge deck option.
The owner is also able to select either manual, electric or hydraulic winches, as well as either the standard T-shaped keel of 7.2 tonnes or the IMS-optimised version. The result should be that the Aiken 62 class can enjoy very close racing without some of the limitations of a pure One-Design racer, which tends to make few concessions to cruising comfort.
The carbon rig dispenses with the complexities of runners, opting instead for a simple, two-swept-back-spreader configuration. The jib is non-overlapping, making the sail plan very tall and efficient and at the same time very easy to handle Price ex. VAT
Please contact at +31 (0)320 746046
Additional Specs, Equipment and Information:
Builder: Aiken 62
LOA: 18.90 m
Engine Brand: YANMAR 4JH3-DTE
Engine Model: 4 Cylinders
Engine/Fuel Type: Diesel
Length Overall: 19.04
Length at Waterline: 16.66
Max Draft: 3
Ballast: 7.2 t
Displacement: 20 t
Total Power: 125 hp / 3650 rpm
All joinery in first - choice Teak veneered marine plywood, partially PVC foam sandwich paneled plywood.
Massive wood is Burma Teak. Joinery and panels are varnished with satin-gloss PU varnish(4 layers). All joinery is non structural. All doors have laminated or massive frames and locks for the open position. Larger locker doors are provided with louvers for ventilation. All portholes, hatches and windows are provided with curtains or shades.
Structural main bulkheads are built in epoxy laminate sandwich and varnished by light-cream coloured PU paint to match the Teak joinery and to lighten the interior of the boat.
· Staircase in Teak wood features elevated sides to provide better foot grip during sailing.
· 2 vertical grabrails on each side (teak or st.steel)
· Lower 3 steps are attached to the engine room cover, once lifted (gas struts) it allows full access to the engine compartment.
· 12 V pick - up for deck flashlight
· Companionway and the stairs are built using only resistant materials that do not deteriorate on exposure to sun or salt water. At the same time they guarantee easy cleaning and maintance.
DAY TOILET COMPARTMENT TO PORT
· Door from entry area in front of the companionway with lock
· Fixed window to coachroof side with courtain
· Marine head with hand pump and direct overboard discharge
· Washbasin with pressurized water (hot and cold)
· Mirror and toilet compartment set
· 2 lockers above the head and washbasin
· A locker below the washbasin with seacocks
· Neon light
· The toilet compartment is a GRP moulded piece including the floor basin with an outlet for the shower water
· Floor grid in non - skid covered GRP moulding for easy cleaning and hygienic maintenance
· An electric exhaust ventilator in the lateral aft part of the locker takes air out of the compartment to the aft platform area
· Air inlet in the ceiling to the ventilated space under the cabin roof top - with watertight cap
· Black water tank (with overboard and optional deck discharge)
DINETTE TO PORT FORWARD
· Comfortable sitting arrangement for 6 with panoramic vision at seating level
· 10-15 cm double density foam mattresses and backrests, high quality removable fabric
· Grabrail integrated in the aft midline part of the settee accessible from the companionway
· Storage space and lockers under the settee
· Stereo speakers behind the aft and fwd part of the settee to Port
· Reading spotlights in the aft and fwd part of the settee to Port
· Shelves and bird-nest lockers behind backrest.
· Large table of a very strong construction, fitted on two stainless-steel or aluminium column, fixed to the bottom girder structure.
· Locker below the settee contains the hot-water heater, using double-circuit engine cooling water or 220V rheostat heater.
· Lockers with doors and separation shelves under the aft part of the settee.
· Shelves behind backrests of dinette.
· Side windows to cabin roof with sun-shades (Ocean Air)
· Neon light (3 halogen spotlights ) over the dining table.
· Floor boards are easily removable (in Taek) and provide access to fresh water tanks.
· Bilge pump inlets are placed in the bottom of the keel stud.
· 2 Grabrail handles running alongside the saloon (teak or st.steel)
· Courtesy lights under companionway stairs and along the floorline in saloon, lit step down to front cabin
· 2 opening hatches with blinds (Ocean air) in the roof above the saloon
SALOON STB SIDE:
· A large oilskin locker to Stb aft, drained to the bilge and well airated to saloon and to the ceiling (to the ventilated space under the cabin roof top - with watertight cap
· Navigator's chair allowing good visibility forward - chart table serves as inner steering position with an optional joystick
· Chart table with chart drawer under.Table can be locked in lifted position.
· Chart reading light (a neon light) is recessed in the bottom of the navigation panel.
· A 220 V pickup for domestic appliances is built in the separation bulkhead between the navigation and pantry (pantry side).
· In front of the table there is a suspended instrument holding element allowing good visibility of information (chart reader, radar , other,…
· The space under the navigator forms a large technical zone with pumps, valves, the compressor of the refrigeration units with aeration slots etc. It is easily accessible and lies high and dry above bilges. Even at high degree of heel the bilge water has no access to this space or to wiring and navigation panel.
· A stowage space for books etc. is provided to the side of the navigator's seat.
· In the front upper part of the chart table there is a large instrumentation panel with electrical distribution panel, and other instrumentation. Panel is easily removable for access to switches , mounting of additional instrumentation etc.
· To midline of the chart table a shelf leading forward to the pantry area with a grab handle in the aft part (accessible from the companionway)
· A bar locker under the shelf
· Stereo radio with CD (mini HiFi system)
OWNER'S CABIN FORWARD
· Door from saloon locks in open position - to the mast cover
· A full-size right-centered double berth to Port
· Shelf above the berth.
· Mattresse 15cm foam, fabric covered /removable/.
· A cabinet on the main bulkhead over the berth
· Stowage under the berth.
· Log and echosounder pick-ups are mounted under the midline part of the berth.
· A hanging locker fwd of the berth, mid-height, with a shelf on top
· A large hanging locker to Stb against the main bulkhead, shelf on top
· Working desk with book shelfs, vanity drawer with mirror, on Stb
· 2 comfortable seats to front and aft of the table
· Lockers overhead to Stb
· Floor is fully carpeted (removable )
· 2 dome lights, working desk light.
· 3 reading spot lights (1 orientable over the head of berth, 2 at each seat)
· 2 opening hatches with roller blinds on the cabin ceiling.
· 2 fixed hatches with courtains on the cabin sides
· Grabrail in the ceiling over the central line
· Mast base covered with wood paneling
· Grabrail (vertical) on the mast cover to allow easy berth access.
FRONT TOILET COMPARTMENT
· Access through an asymmetric door opening inwards Marine head with hand pump and direct overboard discharge to Port behind the bulkhead to Owner's cabin
· A Teak cover to form shower seat
· Cabinets behind, above and fwd of the marine head
· Space for optional holding tank with overboard and deck discharge.
· The toilet compartment is a GRP moulded piece including the floor basin with an outlet for the shower water.
· Floor grid in non - skid covered GRP moulding for easy cleaning and hygienic maintenance.
· Washbasin with pressurised water (hot and cold) to Stb
· Mirror and a toilet compartment set.
· A locker below the washbasin with seacocks.
· A neon light.
· Cabinets behind, above and fwd of the wash basin
· A large opening hatch with a roller blind on the cabin ceiling - positioned to increase the standing headroom
· Shower with a pressurized system (hot and cold).
· Shower water is pumped out on the yacht's side by an electric pump: the switch is in the locker.
· Central front area on the bulkhead is left free for installation of the optional watertight door to the sail locker
· The front section of the yacht forms a sail locker and is separated from the rest of the yacht by a strong collision bulkhead.
· Watertight door from the bow washroom, lockable from both sides
· An automatic bilge pump is installed in the bottom of the locker aft
· An electric dome light , watertight, is installed on the bulkhead from the washroom above in the midline
· Hooks and shelves for storage of sailing gear are provided
· A large opening hatch on the locker ceiling - positioned to increase the standing headroom
AFT CABIN (SYMMETRIC, PORT AND STARBOARD)
· Access from the saloon, two steps down
· Door lock in open position, opening into the cabin
· A full size hanging locker to the boat side
· A full-size double berth (145x200 cm).
· A wrap- around shelf above the berth.
· Mattresses 10-15 cm foam, fabric covered (removable).
· Stowage under.
· Hull side liners in foam-support fabric , Velcro fastened.
· A hanging locker with a shelf above.
· A seat in front of the locker.
· Floor is fully carpeted (removable).
· A dome light and 2 reading spot lights.
· A door to the engine compartment.
· A shelf above the engine compartment.
· An opening hatch with a roller blind on the cabin ceiling.
· An opening portlight to the cockpit side with a courtain
· Shelves for small items on the sides.
· Access to the technical area in the midline
PANTRY TO STB FORWARD
· From saloon there is a shelf to the pantry area used for serving food and other items to the dinette table
· Pantry is one step down from central area going forward
· Work space is made in extremely resistant material (mechanical, chemical and temperature resistance). All sides are elevated and prevent spilled water etc. to penetrate into lockers or wooden parts.
· Double sink is recessed in the work space without a separation rim to provide easy maintenance and cleaning of the pantry surface. Located on the side of the front bulkhead.
· A pressure fresh water system (cold and hot water) with a tap is installed.
· Under the sole in the pantry there is a moulded-in removable dust-pan, for easy cleaning of saloon floor.
· A sea water tap with a foot pump and a Y valve seacock is provided to allow: - either the seawater inlet, - or a fresh water intake from the fresh water tank through the foot pump in case of pressure system or low voltage problem.
· Seacock in bronze located under the sink for the pantry sink outlet.
· Under the sink there are drawers for food and small kitchen items.
· A garbage can is attached to the locker door under the sink.
· 3 lockers on the lateral side over the sink.
· Numerous lockers are placed over the sink area.
· 3 - flame gas burner with stove, semi-gimballed with automatic gas shut - off switches. Gas turn - off valve behind the stove. A lock in horizontal position is provided. Located to the aft of the sink laterally
· Flame protection around the stove is mounted.
· There is a electric exhaust fan over the stove leading to the aft platform recess
· The floorboards in the pantry are covered with Teak (easy to clean and resistant to mechanical, chemical and thermal agents).
· Under the stove there is a locker.
· Stowage shelf behind the stove.
· Refrigerator (located to the aft of the pantry) has two compartments, both accessible from the top (deep freeze and normal refridgeration temperature) taking volume also from the front part on the chart table
· Refrigerator access hatches have spilled water protection lips.
· A deep freeze unit has top access with a lockable insulated cover.
· The insulation in both units is made by an 80 mm foam shield
· An electrical freezer unit is built in each of the two compartments.
· Outlet from the bottom of the refrigerator boxes to the bilge is provided with a valve (plug) on the upper end.
· There are numerous lockers and drawers above the refrigeration units opening to the galley.
· The bar area between the galley and the saloon permits easy passing of food and crockery to the saloon table.
· Above the refrigerator there is a locker providing placement of an optional microwave oven.
· Recessed neon light and dome lights above pantry.
· 3 recessed halogen spotlights on the Stb side roof ceiling over the chart table and pantry area
· 3 batteries are installed (2x170 Ah + 1 x 140 Ah).
· 3 main switches are used for 2 separate circuits:
o board service bank 2x170 Ah,
o engine starting of 140 Ah.
· Alternator (12 V ) charges through a blocking diode
· An automatic 220 V charger is mounted.
· Engine, rigging, keel are connected via a copper wire strap and grounded for lightning protection.
· Distribution panel is placed over the chart table and features:
o Magnetic circuit breakers.
o A pick-up for 12 V.
o 12 V voltmeters for both groups.
o Main switches.
o 220 V switch.
o 220 V battery charger with controls
o Fresh water level indicator.
o Fuel level indicator.
o Stereo CD radio with antenna on the navigation panel
· Stereo speakers in the saloon.
· Navigational instruments : -
o Compass on both pedestal with night light,
· Navigation lights:
o two lights mounted under the bow pulpit
o an anchor light,
o a motoring light,
o a deck light on mast,
o a stern light on stern pushpit
· Engine key with engine starter.
· Bilge pump switches.
· Cockpit illumination on pedestal rail
· Lights inside:
o 9 halogen spotlights, recessed
o 4 dome lights
o 9 reading lights
o 3 neon lamps
o courtesy lights where needed
· Deck covered by anti-skid paint system on exposed surfaces
· Top Genoa stainless steel 3-purpose attachment point (padeye) forward (serving as bowsprit and anchor bow fitting fixing point )
· Hull-deck joint covered with 25 mm high rounded teak toe rail
· Under-deck forestay attachement system
· Achor locker cover with hinges (2) and locking/opening fitting on STB
· A 1200 W anchor windlass recessed in anchor well, vertical drum, chain gypsy only, hand-held control w cable led directly to control box located in sail locker. The position of windlass enabling the anchor (15 or 25 kgs Bruce or Delta) to be carried outside with ancor well cover closed.
· Chain retention padeye in locker (forestay fitting)
· Swinging bow fitting in carbon on STB of forestay
· STB and Port bow pulpit, height 610 mm, 3 legs, navigational lights in aft corner. 30 mm polished st.steel tube.
· Through-deck furling line block
· 12 stanchions with st.steel bases, 610 mm x 25 mm, double height stainless steel lifelines
· Double lead blocks on stanchions above bases on port side.
· Mooring cleats in aluminium , folding , 330 mm, 2 in front, 2 aft, NOMEN type
· Staysail attachement point (folding padeye) over fwd sail locker bulkhead
· A low-profile hatch 80x80 cms over sail locker
· A low profile hatch 80x80 cms over sail front bathroom
· 2 low-profile hatches 60x60 cms over front cabin
· Jib barber padeyes, 1 per side
· Jib barber stand-up blocks, 1 per side. Barber line serves also as staysail sheet or boom preventer.
· Jib barber opening blocks, 1 pair
· Jib tracks , length 100 cm , with control line-operated stops and sheet lead under the deck roof cover
· Roller bearing genoa car tracks, 1 per side
· Fixed genoa track exit blocks, 1 per side
· Mast step padeyes (3 per side, 2 aft)
· Jib barber padeyes, folding
· Main chainplates, in carbon composite and stainless steel
· Coachroof side and front windows in toughtened safety glass , glued (bonded) to carbon laminate of the deck
· St.steel lead Stb and Port under the roof cover for lines coming from the mast and the jib sheets
· Turning blocks Stb and Port for the lines coming back
· 2 low profile deck hatches in the roof for saloon ventilation (50x50 cm)
· Recessed storage space for spraydodger
· Sliding companionway hatch in composite sandwich with water drainage
· 2 Washboards with lock and ventilation slots in wood. Storage space provided
· 2 grabhandles on companionway, teak or stainless steel
· 2 opening hatches over aft cabins, 40x40 cms or similar, low profile
· folding padeye for code "0" sheeting point
· 2 opening portlights to aft cabins in cockpit sides, 20 x 50 cms
· 4 stoppers each side for lines coming aft
-Jib barber, staysail sheet, boom preventer
-Mainsail base outhaul
-Jib barber, staysail sheet, boom preventer
· 2 selftailing winches, electric powered, aluminium black anodized, 2 speed, for mast lines and jib sheet
· stopper on sheer line for furling line, Stb
· turning block for furling line, Stb
· turning blocks for spinnaker sheets and code "0" sheets
· 2 selftailing winches, aluminium black anodized, 2 speed, for aft sheets and lines
· Aft pushpit, Stb and Port, 30 mm st.steel tube, 610 mm height. Navigational light on Port, Flagpole socket on Stb
· 2 storage lockers in cockpit seats, with hinges and lock
· Lifeline padeyes on both sides of companionway
· 2 stowage pockets for tails aft of cockpit seats, sail cloth
· Cockpit table with leg support , 2 folding flaps and grabrail above. Drink holders.
· Steering console pedestal with st.steel tube protection grabrail.
· Mainsheet padeye in front of the console
· Navigational instruments space on the console Stb and Port.
· Engine panel to Stb in the cockpit side .
· Steering wheel in carbon fibre 160 cm diameter, recessed in cockpit floor with drainage.
· Emergency steering tiller cover in cockpit floor
· Lifeline attachement padeye aft of the steering wheel
· Bilge pump in cockpit side to Port of helmsman's seat
· Engine control lever in cockpit side to Stb of helmsman's seat
· 2 cockpit lockers aft of the steering wheel in helmsman's seat , with hinges centrally and locks laterally
· Backstay chainplate in composite and stainless steel in midline
· Fold-out stern platform (operated hydraulically) with stops in both positions
· Folding bathing ladder in 25 mm st.steel tube with stowage in the aft lockers
· Gap between the platform and the stern allowing for ventilation / exhaust of :
Pantry and aft bathroom ventilation
· Stern shower with hot and cold water in aft platform recess
· Shore power cable in aft locker, directly mounted to the 220 V panel
· A deck filler gland for water and filler gland for diesel. Clearly marked to prevent mistakes during tankage.
· Rudder angle blocking device on the steering quadrant.
· Propane locker in aft cockpit locker , vented & drained to stern platform recess,
· Engine exhaust fitting on stern midline low (st.steel)
- · Hull is a one-piece sandwich laminate using Carbon/E-glass/Epoxy resin with Core-cell "P" grade SAN-based polymer as core material ( 25 mm high density foam, 130 and 100 kg/m3). Laminate is built using the prepreg technology developed by SP systems (prepreg vacuum bagging with curing at 85 degrees C - Sprint).
- · The structural bulkheads are made from female moulds using same laminate sandwich system with core thickness of 20 mm. Bonded to hull and deck with Spabond 345 Epoxy Adhesive System (SP Systems).
- · 2 forepeak bulkheads are watertight. The space in front of the forward bulkhead below the anchor well is filled with closed-cell PU foam.
- · Longitudinal and transverse stiffeners going are built in solid laminate using Carbon/E-glass/Epoxy resin (prepreg vacuum bagging with curing at 85 degrees C) bonded to the hull and structural bulkheads with Spabond 345 Epoxy Adhesive System (SP Systems)
- · Mast support in solid carbon laminate attached to the bulkhead and longitudinal stringer.
- · A medium draft lead bulb and cast iron fin keel is provided.
- · Keel area framing is made of Carbon-E-glass reinforced epoxy laminate, shock loads are spread over entire bottom area. Four transverse stiffeners for keel support, 80 cm spacing, two carbon wing bulkheads at the aft part of the keel plate to transmit grounding loads
- · The iron part of the keel is sandblasted, treated with primer and four layers of epoxy paint for full corrosion protection.
- · Deck is a one-piece sandwich laminate using Carbon/Epoxy resin with high-density foam
- as core material ( 25 and 20 mm high density foam, 100 and 80 kg/m3). Laminate is built using the prepreg technology developed by SP systems (prepreg vacuum bagging with curing at 85 degrees C - Sprint). Roof cover built with the same technology is mechanically attached on top.
- · Hull - deck joint is chemically bonded -glued with Spabond 735 Epoxy Adhesive System.
- · Self-aligning bearings steering system, with complete Vectran cable for substantial weight reduction .
- · Resistant to the corrosion, the bearings are self-aligning roller watertight racing version (JP3)
- · Carbon pedestal bonded to the deck.
- · 3 "Y" spokes carbon fibre wheel (160 cm diameter)
- · Steering pedestal system with chain drive- Vectran cable system.
- · Spade rudder is a high ratio airfoil section in carbon / epoxy laminate over massive carbon stock., built in high-pressure, high temperature autoclave (Isotop). GRP rudder tube, laminated to hull and a high laminated transverse and longitudinal girder.
- . 2 hull portlights, fixed, in front cabin area, glued and mechanically bonded
- . Hull and deck are sanded, primed with epoxy primer and sprayed with PU paint for best UV protection and gloss retention. Standard colour is white.
- . Hull cove and decorative stripes are painted with PU paint
- 3 MAST AND RIGGING
- · 9/10 2 spreader carbon mast
- · Masthead with 1 sheave aft, 2 sheaves forward for gennaker and code "0", platform for anchorlight, antennas, windvane and windex, clevis pin for backstay.
- · Headstay tang with straptoggle.
- · Sheave for genoa halyard in a position suitable for furling headstay.
- · Tang and sheavebox for inner forestay .
- · Reinforcements, compressions tubes and bushes for cap tang
- · 2 pairs of spreaders on bars with machined seats for diagonals, swept aft 20 degrees.
- · 5 halyard exits with pilotlines.
- · Gooseneck bracket with sail attachment and reefing hooks.
- · Vang bracket with attachement for rod vang and purchase block.
- · Standard mast step with through deck collar and fittings
- · Socket for cables and exits as required.
- · Wedges, watertight housing and clamps.
- · Awlgrip Painted
- · Spreader bars in hard anodized aluminium.
- · Gooseneck and vang fitting in hardanodized aluminium
- · Aluminium boom for loosefoot mainsail.
- · Outboard and inboard endfittings in alu with each 4 sheaves.
- · Outhaul purchase.
- · Vang fitting in hardanodized aluminium.
- · Rigid vang pneumatic
- · 2 reeflines.
- · Running rigging-Dyneema, to be specified
- · Standing rigging- Navtec Rod-Discontinious with Navtec rigging screws
- · Maststep for Hydraulic Mastjack system, reinforcement of bottom part of mast section.
- · Heelplug, maststep, shims and jack bar in hardanodized aluminium.
- · Backstay adjuster mechanical Harken (winch handle operated) B 500
- · Jib furling gear Facnor , black anodised profiles
I 19,600 m
J 5,725 m
P 18,900 m
E 6,280 m
BAS 1,750 m
No sails are delivered with the boat as standard
main sail 70 m2
106% jib 61 m2
160% flying genoa (bowsprit) 123 m2
asim. spinnaker appx. 214 m2
- Mainsheet with blocks
- Vang with blocks
- Outhaul on mainboom
- 2 reefs
- Jib sheets
A full-size owner's manual is provided, covering:
- Full technical description of the yacht with technical data and explanatory comments on the function of all items.
- Complete description of the proper use of the yacht and its equipment and gear.
- Hints on sailing, motoring and maneuvering of the yacht.
- Optional or additional equipment: hints on installation etc.
- Maintenance of the yacht.
- Servicing of the yacht.
- Safety features
- Emergency tiller in st. steel.
- 3 fire extinguishers (2 kg) are mounted
- Under the chart table.
- On the companionway
- In the pantry area
- 6 personal safety jackets, cockpit port side.
- · Volvo D2-55 Diesel engine, turbocharged with intercooler.
- · Saildrive mount.
- · Engine is mounted on resilient mounts with special hard rubber to prevent excessive vibration.
- · Water intake seacock is built in the saildrive leg
- · Folding 3-blade propeller.
- · Alternator 12V.
- · Engine compartment sound- proof isolated.
- · Access to engine from all 3 sides
- · A fuel filter with water separator is built in the fuel supply system.
- · A plastic waterlock is mounted below the cockpit floor in the technical area between the aft berths
- · The exhaust tube is taken straight to the stern through a stainless steel exit.
- · Electronic gauge meter (indicator on instrumentation panel).
- · Engine control panel on Stb of the steering pedestal, recessed and Lexan protected.
- · The panel contains:
- - a starting switch,
- - electric stop lever,
- - revolutions counter,
- - engine hour counter,
- - visual and sound alarms for water temperature,
- - visual and sound alarms for oil pressure,
- - visual and sound alarms for alternator charge level,
- - panel light.
- · A single lever engine control, removable, is mounted on the starboard side of the steering position.
- · The starting key (main switch) is mounted on the navigation panel inside the boat.
- · 330 l fuel tank in polyethylene is mounted under the saloon floor
- · Gauge meter at the chart table
- · Fuel intake on deck to Port behind the settees
- · Fuel vent
- · All through-hull fittings are with half-turn lever seacocks and in bronze
- · Rigid fresh water tanks (2 pieces ) with a 400 l total capacity under the saloon floor
- · Electronic gauge meters with indicator above chart table.
- · Pressurized fresh water system on all taps (in both toilets , aft and in the pantry). Pressure pump and valves are placed under the navigator's seat.
- · Tanks can be disconnected by valves.
- · All tanks have inspection covers and overboard vents to hull side.
- · Pantry sink discharge is directly under the sinks.
- · A hand operated bilge pump (high capacity) at the helmsman's position on Port, taking water from the main bilge
- · There are five bilges in the yacht, each having a separate automatic bilge pump :
- o Main bilge in the keel stud,
- o Aft lockers space,
- o Shower water bilges (2X)
- o Sail locker
- · Propane GRP locker holding 3 kgs gas tank in the aft locker, vented to the stern platform recess
- · A gas tank is fitted with the reduction valve.
- · Special rubber hose connects the reduction valve to copper tubing leading to pantry.
- · Behind the stove there is a turn-off valve and rubber hose to the gas cooker-stove burners.
- · The burners have automatic shut-off switches.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from Bach Yachting International
At request, Netherlands
At request, Italy
At request, Spain