|Click on image to enlarge |
- View Full Specifications
- Hull Material:
- Engine/Fuel Type:
The Tartan 3500 has a redesigned coach roof for added interior space and headroom. And it's full of innovative ideas, like a transom featuring an electric swim platform for easy access to the dinghy or the water.
Additional Specs, Equipment and Information:
Designer: Tim Jackett
Hull Shape: Monohull
LOA: 35 ft 3 in
Beam: 11 ft 9 in
LWL: 30 ft 0 in
Maximum Draft: 6 ft 6 in
Displacement: 11400 lbs
Ballast: 4200 lbs
Headroom: 6 ft 4 in
Dry Weight: 11400 lbs
Engine Power: 27 HP
Engine Option 1: 1x 27 HP
Fresh Water Tanks: (72 Gallons)
Fuel Tanks: (25 Gallons)
Number of single berths: 6
Number of heads: 1
Forecabin with lockers, hanging locker and (4) drawers.
78" x 60" forward berth.
Furniture grade main cabin settees and seats with contoured cushions.
Main cabin with teak hardwood cabinets throughout.
Large storage outboard of main cabin seatback.
Varnished drop-leaf centerline table with table storage.
Full navigation station tucked aft to starboard.
Navigation locker with storage space for extensive electronic installation.
Aft cabin with 78" x 60" double berth, hanging locker and shelves.
Storage below berths.
Helmseat storage bin.
Propane gas storage for two tanks - portside.
Hinged storage on top of engine box.
Cockpit seat locker.
Headroom - 6' 4 1/2".
3-burner Force 10 gimbaled stove with oven and broiler Single stainless steel galley sinks - 9" deep.
Molded top and front load icebox, 4" foam insulated.
Built-in trash bin.
Hot and cold pressure water and manual fresh water pump.
67 gallon freshwater aluminum tank.
Extensive lockers, shelves and drawers
Corian® Countertops (Optional).
27 hp diesel with console mount controls and instrument panel.
25 gallon fuel capacity with remote gauge.
Racor fuel filter/water separator.
16" Fixed propeller on stainless shaft.
Brass interior cabin dome lights and directional lights.
Courtesy night lights strategically placed around cabin sole.
Electric sump pump.
Electric bilge pump.
12 volt DC metered panel.
110 volt AC shorepower with distribution panel 50 ft. shorepower cord.
40 amp battery charger.
(2) 105 amp batteries with selector switch
Electrical bonding system.
UL approved stranded, tinned copper ABYC color coded wiring throughout.
White NPG/ISO gelcoated hull, hand laminated with alternating layers of strand mat and uni-directional "E" glass locally reinforced.
Partially cored with Baltek balsa for stiffness with solid glass at all thru hull, chain plate and keel installations.
Gelcoat backup layer is laminated and chemically bonded using a 4mm barrier coat of vinylester anti-corrosive resin for blister resistance.
Bronze thru-hull fittings.
Bulkheads and floor timbers are directly taped to the hull skin while in the mold.
Built to ABS Plan Certification.
Backed by a 10-year blister guarantee.
White, off-white or sand gelcoated deck with patterned, contrasting non-skid.
Hand-laminated sandwich composite of polyester resin.
Uni-directional "E" glass and end grain balsa core.
All hardware installation points are solid glass backed with 1/4" aluminum plates.
Joined to hull using stainless steel fasteners that are drilled and tapped into aluminum backing plates then molded into hull flange.
Bonded with 5200 sealant.