Additional Specs, Equipment and Information:
Specs
Designer: Andrew Wolstenholme
Hull Shape: Modified Vee
Dimensions
Beam: 11 ft 8 in
Maximum Draft: 3 ft 1 in
Dry Weight: 14300 lbs
Engines
Drive Type: Stern drive
Maximum Speed: 22 mph
Range: 200 mi miles
Engine Options
Engine Option 1: 2x
Tanks
Fresh Water Tanks: (75 Gallons)
Fuel Tanks: (192 Gallons)
Accommodations
Number of single berths: 6
Number of heads: 1
Additional Description
Wheelhouse
Fully instrumented console including:
Engine instruments
Compass
Raymarine ST60 Tridata speed log and depth navigation instruments location
VHF radio location
Electrical 12and 240v control/monitoring panels
Fuel and water gauges
Helm and co pilot seats
Sliding glass sunshine roof (electrical operation optional)
Long sofa to starboard which converts to berth
Port side cabinet with drinks locker and location for TV
Halogen ceiling lights
Two opening aluminium side windows
Sliding aluminium half glazed door and surround
Optional moveable seats
Table location
Co-ordinated curtains, linings and carpets
240v socket
Cabin
Additional Description
All soft furnishings are fire retarded
U-shaped sofa which converts to double berth using sliding infill locker and infill cushion stowage under
Teak dining table
Co-ordinated upholstery, curtains and carpet
Teak and vinyl ceiling trim
Opening portlights
Halogen ceiling lights, Courtesy lights for companionway
Fixed ventilator, Stowage/bookshelf
240v socket
Forward Cabin
All soft furnishings are fire retardant
Forward access hatch to chain locker
Framed mirror
2 single berths converting to double, with storage under
Berth cushions
Wardrobe
Port and starboard stowage lockers
Curtains and carpets
Teak and vinyl ceiling trim
2 x halogen ceiling lights, 2 x fixed portlights
Deck hatch with blind
2 x reading lights
240v AC socket
Fixed ventilator
Toilet/Shower Compartment
Combination shower head/tap
Overhead light
Moulded vanity unit with stainless steel sink, toiletry holders, storage and mirror. Stainless steel shower rail and towel rail
Sea toilet
Opening portlight
Fixed ventilator
Additional Description
2 x 12v DC 125AH batteries, 1 each engine, with emergency changeover
2 x 12v DC 125AH domestic batteries
Alternator split charging system
40A marine battery charger
220/240v AC shore power system
240v AC external socket for shore power
240v AC sockets
Immersion heater
Additional Description
Galley
Fitted out in teak with laminate work surfaces
Crockery stowage
Cutlery drawer
Double stainless steel sink with H & C mixer tap
Gas stainless steel cooker and hob
Refrigerator
Opening portlight
240v socket
12c DC pressurized water system
340L (75 gallon) baffled stainless steel water tank
36L (8 gallon) calorifier with indirect coil from engine and 240v AC electric immersion heater
Additional Description
Separate insulated/ventilated engine room under wheelhouse sole
Compartment coated with fire retardant paint
Twin engine installation
Separate ventilated battery compartment
Electric bilge pump
Two stainless steel 96 gallon fuel tanks
Access hatches with removable deck beams
Volvo Penta Engine Options
Yanmar Engine options
1½" stainless steel shafts
Manganese P brackets
2 x handed 4 blade propellers
Cathodic bonding system to zinc anodes
Stainless steel electric trim tabs
Stainless steel rudder with 1½" stocks
Additional Description
Initial lay-up Lloyds approved isophthalic gelcoat and resin. Subsequent lay-up orthophthalic resin. Stiffened with heavy GRP foam filled stringers and hand bonded plywood grid. Bonded waterproof plywood beds and foundations. Hand bonded, resin coated waterproof plywood bulkheads. Solid bonded engine beds with integral plate steel mountings.
Additional Description
Superstructure
GRP with balsa and Trevira reinforcing. Bonded waterproof plywood equipment beds and foundations.
Hull and superstructure are bonded and bolted together using stainless steel bolts to 10mm backing plates.
Generous nonslip self-draining decks
All deck fittings are stainless steel grade 316
Enclosed by bulwarks and 25.4mm stainless steel pulpit and guardrails
Stainless steel rub rail, Stainless steel bow rail, 6 large cleats
Stainless steel bow roller
Electric anchor winch
Gas locker
5 fixed ventilators
Long stainless steel grab rails
Stainless steel nav. Light mast
Stainless steel socket and ensign staff
Hardy plaques
Navigation lights
Standard Gear
4 warps, 6 fenders
3 x 1Kg dry powder fire extinguishers
Navigation lights
3 electric bilge pumps and manual bilge pump
Gel repair kit
Ensign, staff and socket
Factory options
Personally selected factory fitted items
Bow Truster
50 KGF
Holding Tank
Stainless steel tank with deck, manual pump out and remote gauge
Antifouling
Initial priming followed by two coats of blue antifoul
FM Radio and CD Player
Electric Sun roof
In place of manual type
Sign writing
A choice of one or two colour
Teak Decking
Teak decking in cockpit, steps and side deck
Windscreen and Door Covers
Heating
3kW independent of the engine for cabin port demister
Commissioning
Engine preparation, adjustment and tuning, instrument calibration, trials, instruction and familiarisation, hand over