Other photos: Alerion Express Forward view, Alerion Express V Berth, Alerion Express Aft view in cabin, Alerion express port settee, Alerion Express Profile, Alerion Express overview, Alerion Express cabin, Alerion Express profile 1, Alerion Express profile 2, Alerion Express foredeck, Alerion Express cockpit.
CONSTRUCTION: Hull and deck molded with latest vacuum assisted SCRIMP resin infusion technology. Baltek epoxy coated end grained balsa laminate construction with uni-directional and bi-axial E glass and vinyl ester resins. Recessed cove with 1/4" gold colored stripe . • Deck is white with contrasting gray non-skid. The hull is Dark Green Awlgrip painted, the boot top stripe is white and the bottom is red antifouling paint. • Hull to deck joint bonded with plexus glue. • Solid G.R.P. transverse support floors over keel.
INTERIOR JOINERY AND FINISH: Bulkheads are marine grade plywood with white, low maintenance laminate •Fixed head with plumbing and holding tank. • 38 qt. icebox cooler doubles as a companionway step with teak and holly lid. • Teak and holly cabin sole.
DECKS: Two Lewmar #7A winches. • Roller furling for 100% self tacking jib with portside sheeting. • Mainsheet ( 4: 1) led to Harken traveler system mounted on aft deck with a Barney post mounted Harken cam base and block. • Adjustable (8: 1) backstay below deck with lead to cockpit. • Lewmar deck hatch 19"x 19" with smoke tint. • 4 Fixed elliptical Bomar ports on cabin house. • 6-8" mooring cleats, 2 forward, 2 aft, 2 midship (chocks with forward and midship cleats) • Companionway hatch slider with lexan drop-in washboard and inside/outside opening, lockable stainless hasp. • Halyards led aft thru deck mounted Harken fairleads to triple Imtra clutch stoppers' port and starboard. • Custom stainless stemhead with welded jib tack and fair lead ring. • Varnished Teak handrails on cabin house. • Varnished Teak toe rail. • Self draining cockpit. • Flag, pole and socket.
STANDING AND RUNNING RIGGING: Standing rigging--stainless wire 1 x 19 with open barrel turnbuckles, continuous rigged system for easy rig tuning • Custom port and starboard chainplates • Running rigging includes internal main and jib halyards • Lazy-jacks and single line reefing for mainsail. • Hall Quick Vang system. New forespar whisker pole
STEERING: Tiller is laminated teak with extension. • Rudder stock is a high strength stainless steel shaft with two low maintenance Rulon bearings. • Balanced spade rudder with elliptical profile, low drag section.
ELECTRICAL: 12VDC to A.B.Y.C. standards. • 12 Volt Starting Battery. • Bass electrical panel with 8 circuit breakers • Guest battery switch. • Interior light fixtures - 2 swivel, 1 dome in V berth. • Navigation lights. • Mast and chainplates grounded to keel for lightning protection to meet A.B.Y.C. standards. • Electric Bilge Pump
SAILS AND CANVAS: Mainsail and cover, Working Jib on roller furling, Sunbrella cockpit cover (2010), Sunbrella sail cover (2009), cockpit cushions
PLUMBING: Galley; Counter top space, a cooler and a fresh water sink with pump. Raritan PH-II head (2006)
EQUIPMENT: Folding prop, Plastimo bulkhead mount compass (2006), ICOM M402 Waterproof DSC VHF with remote command mic , mast top antenna(2006), Raymarine ST40 Depth and ST 40 speed (06) New ST 40 depth sounder display unit (2012), Danforth anchor, line and rode, dock lines, swim ladder, misc parts and supplies
COMMENTS: This boat has been yard maintained and stored indoors since her current owner bought her in 2005. Many upgrades include : New Awlgrip paint on hull mast and spreaders (2006), Teak and Holly sole (’06) All bright work was professionally stripped and redone in 2006 and annually redone since. Lightly sailed from June through September
Please contact David Gillespie at 207-244-3374
Contact Classic Boat Shop.