
Other photos: Brochure page 2 - sailplan / layout, Brochure page 3 - cabin looking fwd, Brochure Back page w/ specs, Anchor Well, Hand grab @ entrance, Companionway ladder, engine access, Diesel, 18hp Yanmar, Brokerage Sign - Nifty Logo, Swim Platform, transom at rest, Main Interior looking forward, cushions out for cleaning, Nice teak and holly & table, Starboard sideview @ Dock before work, Sideview starboard aft before work, Companionway cover, Cockpit, Open transom, swim platform, Name, Flat fender, UV on headsail needs cleaning, UV on headsail needs restitching, Harken Rollerfurler, Cabin top / topsides looking aft, Harken backstay adjuster, Anchorwell before cleaning, Pull out on Trailer, Derig with our equipment, Off loading boat to stands, Open transom totally buffed and polished, Note shine on transom, Off loaded prior to starting underbody work, Pencil sized blisters needing repair, Blisterin under epoxy done 15 years earlier, Start of removal of all gelcote from underbody, Starboard underbody totally opened up, Port underbody totally opened up, Keel coating blisters being filled with 3M Vinyl ester filler, Large blister opened after peeling of hull, Folding prop, Bulb Wing Keel - very efficient, West System ready to go, Installing 1st of 9 coats of West System with barrier additive, Nearing completion of epoxy, After 9 coats and sanded for new anti-fouling paint, Epoxied underbody sanded ready for bottom paint. | ||
This "FRESH WATER" Hunter 28 is ready and waiting for her new owner. Hopefully "KNOT ON LINE" can fulfill your sailing dreams for now and years to come. Read below about the features and you will close in for a closer look. Currently cosmetics are in the process of being TOTALLY improved. Moved to our yard the first week of February, we have buffed and starbrited the sides of the boat and have begun the process of improving the underbody. The boat as of 2/17/2012 has been totally stripped down to gelcote on underbody and a full West System Epoxy membrane is about to be installed. Similar work is proceeding on the Keel and the rudder. We have photos of all work before, during and after. When we are finished with the entire "reconditioning", we will have a boat that will virtually need NO WORK or improvement - - unless you would like us to install built-in Air Conditioning. She will include a new sailcover, new bimini covering, and new UV for the headsail. All teak is being totally refinished on the exterior and the interior, which is respectable to start with will have additional teak oil after cleaning. This will be one VERY DESIRABLE Hunter 28 !!! Come buy this boat before someone else does !! Pre-sailed sailboats are selling very well !! As of 3/24/2012 we have completed the 9 coat epoxy effort on the underbody. Please see photos shown above that will march you through the work that has been accomplished. Further we have preped the sides for new Imron Navy waterline stripe and a new navy shear stripe. When finished we doubt that you will be able to find a more suitable Hunter 28 ANYWHERE. And this is a FRESHWATER BOAT - - NOT a saltwater boat !! | ||
Contact: Chris Rooke, ROOKE SAILS, INC., 1744 Prescott So., Memphis, Tn. 38111 Please contact Chris Rooke at 901 744-8500 | ||
Contact Rooke Sails.
|