|
40' Bruce Roberts Custom 40 Steel Cutter
|
Other photos: Salon1, Dinette, Galley 1, Galley 2 , Starboard Quarterberth, V-Berth, Salon 2, Nav Table, Port Quarterberth. | ||
This 1990 40 Ft Custom Steel cutter is just about the perfect cruising boat for a couple interested in setting out on an extended voyage. She is based on a Bruce Roberts 38-foot design and the plans were professionally modified for more efficient sailing capabilities. She has everything you'll need for cruising, including: - Full keel, beam 11 Ft., draft 5.5 Ft - Displacement 27,000 lbs - Water tanks - 50 gallons x 2 (100 total) - Fuel - 70 gallons total (one 50 & one 20) - a hard dodger - a 125-amp high output alternator - two 125 watt solar panels, with regulator - Kiss wind generator, with regulator - Instruments consist of: wind, speed and auto pilot ”Nav Man” compass KVH, depth Horizon. - Anchors – Bruce 20 Kg with 275 ft. of chain, CQR 45 lb with 25 ft chain with 300 ft 5/8 rode - Electric windlass. - Sails – forward sail 150 % Genoa on Shaffer 3000 roller furling, Main sail, inner stay (storm sail) - all sails are off-shore heavy fabric and triple stitched - two bilge pumps - one standard 2200 gph and one emergency 3200 gph - Two man-overboard lights - Fridge and freezer 3 cubic ft each - and lots and lots of storage If you're planning on heading out for that "ultimate voyage", this extremely capable and safe vessel should be on your "must-see" list. | ||
For further information on this vessel, please contact either Grant or Pat Bowlby at Harris & Ellis' Gananoque Office 613-659-3344 or by Email mailto:grantandpat@harrisellis.com | ||
Contact Harris & Ellis Yachts.
|