- View Full Specifications
- Engine/Fuel Type:
- Single / diesel
- Located In:
- Sant Carles, Spain
- Hull Material:
- Current Price:
- £ 62,500 Tax Paid (US$ 76,738)
The Moody 376 is a typically spacious centre-cockpit from the Dixon design board. This Moody 376 is fitted out and equipped for extended cruising, and has had a recent new engine, feathering prop, autopilot, sails, standing rigging and dinghy/outboard. Currently moored in mainland Spain, her berth is also available for a purchaser to take over. A really nice looking example of her type, and sensibly priced.
Please contact at 0044 (0)1590 682701
Additional Specs, Equipment and Information:
LOA: 37 ft 8 in
Beam: 12 ft 6 in
LWL: 31 ft 1 in
Maximum Draft: 5 ft 6 in
Displacement: 7820 kgs
Ballast: 2950 kgs
Total Power: 38 HP
Engine Brand: Beta
Year Built: 2013
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 140
Propeller: Folding propeller
Drive Type: Direct Drive
Engine Power: 38 HP
Moody 376 built in 1989 by Marine Projects (Plymouth) to designs by Bill Dixon
GRP Hull, deck and superstructure
Fin keel with skeg mounted rudder
Hull moulding number as on Lloyds register of shipping plate BRS 860805 (and on port transom) is LR-BRS-860805 with 188 underneath (probably the build number)
Hull additionally blue Gel epoxy coated.
Moody manual PDF available
YM test report PDF available
Deck stepped mast length: 14.3M
Waterline to masthead: 15.78m
Ballast: 2950Kg (38% ballast ratio)
Mechanical and Electricals
Beta Marine 38HP ( 140hrs running) commissioned 2013
Engine last serviced October 2015
Engine blower (2014)
Exhaust temperature alarm (2014)
Prop shaft and coupling renewal (2009)
Kiwi Prop (2010)
2 Bladed bronze propellor as spare
Automatic Fire extinguisher in engine compartment (2010)(viewing window in access hatch)
65A alternator regulated by Adverc charge controller.
230v ac mains sockets in saloon, chart table and aft cabin.
40 Amp Newmar mains charger.
Nasa BM1 battery monitor system (2009)
4x 40W solar panels (2009) and regulator (3 angle adjustably mounted on aft deck gantry, 1 roving/spare) - switchable to charge windlass battery or service batteries.
Additional 2 x roving/folding solar panels (lash on bimini/boom at anchor) (2014) with chart table ammeter.
300w 230v inverter
Twin 12v cigar sockets + 2 separately mounted double USB phone/tablet charge sockets.
1 x 90Ahr Engine start (2016)
1 x 80 Ahr - Windlass (2010)
1 x 110 Ahr service (2013)
2 x Explorer deep cycle (combined 148 Ahr) (2013)- switchable service
1 x 60 Ahr Explorer deep cycle - Electric outboard (2010)
Water: total 370litres - two tanks under saloon seats, each 125l + additional 120l Vetus flexible tank under quarter-berth, all with isolating valves.
Fuel 204 lt (45gal) + spare 25l can
Holding tank for aft heads: 36l (2014)
Larger calorifier (40l) heated from engine and immersion element - fitted 2012 & with additional insulation and thermostatic temperature control to hot water circuit.
New standing rigging, toggles and turnbuckles commissioned (2010)
Lazy stay for storm jib & winging second genoa. (2011)
2 main halyards (2009) - one at mast, one in cockpit.
Whisker pole stowed on mast track. (2009)
Mainsail (3 point slab reefing), stackaway cover with lazyjacks. Leech line adjustable at mast (2010) by Quay Sails, Poole
150% genoa (with luff packing) (2010) by Quay Sails, Poole
Hanked-on storm jib (2011) by Crusader Sails, Poole
2nd genoa re-luffed and converted to hanked-on for goose winging on lazy stay (Crusader Sails)
Dart sails cruising chute with snuffer.
2 x Self tailing Lewmar 43 - genoa
2 x Lewmar 12 - mainsheet and furling line
2 x Lewmar 16 - Reef lines, outhaul, kicker and main.
3 x Lewmar 30 - Mast.
6 x Jammers (4 of which added 2010)
1 x Jammer on mast for main halyard.
Accommodation: 7 berths in 3 cabins. 2 heads, 1 with shower.
Saloon and aft cabin silent, very low power 12v hatch fans for forced ventilation & at chart table (2014)
V berth in forecabin with infill
Jabsco marine WC - 2011
Custom double bunk conversion of stb saloon berth.
Port saloon berth
Saloon is fully short pile carpeted in teak battened sections. All can easily be uplifted for cleaning.
Double bunk - with added memory foam and drymesh (2010)
Vanity area with mirror
Opening hatch and ports
Jabsco marine WC - 2011
Quarter-berth currently used as storage area for bikes and miscellaneous items (with straps and fixing points) etc. but can be converted back to a sea berth.
Lee cloths available for all berths.
Wingnut secured removable vice and tools on quarterberth.
Chart table seat is office type chair on swivel with hinged base for accessing day tool stowage below.
230v ac 850W oil filled radiator + 2KW fan heater
LED lighting in all cabins
Additional remotely dimmable accent lighting strips in saloon & galley.
LED cockpit light - fixes to bimini.
Roving LED anchor light.
LED strip light above fridge
Nasa Supernova LED tricolour at masthead (2013)
Sony CDX-GT430 CD/radio/USB/MP3/line in/ 4x52 WRMS with quality saloon & cockpit speakers with cockpit volume high/low/off switch (2010)
LG 24" LED HD TV with 12v adapter and USB/HDMI input for video/photo playback . (2013)
Waeco cold machine series 80 fridge with CU84 large evaporator/ice maker. (insulation increased from standard 376 fit-out) (2010)
Galley extract fan (2012)
Salt water tap & faucet (2010)
Techimplex Mastergrill S/S gymballed cooker with separate grill and thermostatically controlled oven (2011)
(All burners with flame failure control)
Gas cutoff valve behind cooker.
2 CampingGaz cylinders in drained deck locker + 1 spare
Aquasource filtered water tap & faucet (2015)
Custom sharp knife stowage in cupboard doors
Fire blanket and companionway fire extinguisher
All galley equipment, pots, pans, crockery, cutlery etc.
All 230v AC galley equipment (Halogen oven, kettle, 2 burner hob, toaster) for use with shore power.
Nasa Clipper Navtex (2010) (chart table)
Nasa Clipper wind system (2010) (cockpit)
Autohelm ST50 speed and depth (cockpit)
Garmin GPS 152 (chart table
Nasa AIS receiver interfaced with chart plotter. (2011) (chart table)
Emergency VHF on gantry with cable to chart table (used by AIS)
Standard Horizon CP180i daylight colour chart plotter with integrated GPS (2010), helm and chart table mounting + 2013 Western Med chart
Eagle Fishmark 480 LCD fishfinder -cockpit coaming mounted (2009)
Horizon Standard Quest GX150E VHF (chart table) & CPM25 cockpit mounted remote (2010)
Garmin GHP12 auto-pilot (quadrant driven Jeffa class A linear ram) (2012)
Autohelm ST 4000 wheel pilot (working as backup) with addition heading/off-course display
Lofrans Kobra 1000w windlass with radio remote control.(2010) and forepeak fitted battery
1st main: 20Kg Rocna (2014) with 45m 10mm galvanised chain (2009)
2nd main: 16Kg Kobra II anchor (2010)
Kedge: FX 16 Fortress 5M chain + 50M 12mm nylon warp (2010)
100m 12mm polysteel floating warp (in net bag) for long line to shore or kedge with chum (2014)
Fixed windscreen and acrylic folding spray hood on s/s tubing.
Custom built 2 part bimini with detatchable sides and back (2011)
Coachroof/foredeck sun awning
Custom folding, stowable passarelle (2014)
Folding anchor ball
6 large fenders (strap stowage for 4 on aft cabin roof), round fender/buoy & bow mooring v fender.
4 step fender with clip attachments for alongside dinghy boarding.
Drop-down S/S swimming ladder at transom.
Folding pedestal mounted teak cockpit table + behind wheel extension option
Bosun's chair (system for using electric windlass + remote control for ascending with additional person to tail)(2010)
Pushpit mounted 4 man XM liferaft (serviced 2013)
FW H/C deck/cockpit shower.(2012)
S/S Outboard lifting arm on pushpit with block & tackle.
Pushpit mounted outboard stowage bracket.
Gas BBQ on custom pushpit mount. (camping version- not S/S)
Dinghy & outboard:
Zodiac CFR 310 Cadet Fastroller ACTI-V INT'l - 3.1m inflatable keel and floor & lockable pocket. (2009)
Suzuki 6hp 4 stroke outboard (2009) -approx 60hrs running (with removable hydrofoil wings)
Electric outboard and separate battery (for ease & short range trips) (2010)
Bravo 2 stage electric dinghy pump with pressure gauge and battery (2014) + foot pump & separate pressure gauge
Custom strap on dinghy sand wheels system.
Lifting bridle for out of water along-side-stowage when at anchor
Dinghy anchor with chain and line. (2013)
4 x 10m multiplat nylon warps.
Many other 3 strand nylon berth warps and braided line.
Mosquito nets for all hatches & companionway (2013)
White pvc custom padded cockpit bench seating in 3 sections
Engine spares and filters.
2 x Protean folding bikes in bags (2011)
Many tools and miscellaneous items.
Electric salt water galley pump.(2010)
Electric Jabsco deckwash pump (2009) - switch & standard hose attachment in anchor locker.
Roving electric bilge pump (2012) (unused)
Manual bilge pump in cockpit.
Electric shower drain pump for fwd heads.
Evenflow automatic pump for pressurised water system with expansion chamber.(2013)
Ocean Dan buoy & light (2010)
Oscar life sling (2010)
Fire extinguishers in Fwd saloon and aft cabin.
Smoke alarm in aft cabin
Keel nuts and backing plates renewed (and three studs withdrawn for inspection (perfect condition) in 2009
Most sea cocks have been replaced and all are sound and operational.
Fuel tank emptied and cleaned out prior to new engine fit. Tank bottom drained again to check for bio-growth (clear) 2015.
All bilges (& hence keel nuts) are now totally dry as all previous draining runs (calorifier pressure relief valve, fridge, transducer, anchor locker) have been modified.
Cockpit teak faced ply renewed with Dek-king synthetic teak (2010).
Shelving and outboard stowage bracket in cockpit locker.
All equipment receipts available
All equipment manuals on board
Circuit diagrams for all electrical installations and modifications.
I purchased Aquagem (originally named "Isle of Glass") in Dartmouth in 2009 from the son of the father who originally bought her from new. She had hardly been used with only 400 miles on the the original log. She only had basic electronics etc and sails, ground tackle and all equipment was original.She had also been on hard standing for some years
Consequently, the first few years of my ownership was spent fitting her out for Med. cruising, replacing virtually everything that had a limited lifespan.
I only sailed her cross channel a few times and weekend sailed her from Poole whilst doing the work.
I then decided to replace the engine just for piece of mind, as I was going to sail her around to the med (it was the only thing left that I had not renewed!)
However, in 2013 I had her transported out to Sant Carles by road instead! Hence the very low engine hours.
She still has not covered many sea miles as I have only managed to sail locally and have a couple holidays cruising around Ibiza. However, I have spent a fair amount of time aboard in the marina just improving things. I thought I was keeping her for life!
All the GRP is in very good condition, the topsides are white (original gel coat - not painted, and virtually scuff free). She has a textured GRP non skid deck which is in great condition, requiring no maintenance).
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Other Boats from Why Boats
Hamble, Hampshire, United Kingdom
Deacons Boatyard, Hampshire, United Kingdom
41 Lift Keel
Conyer, Kent, United Kingdom
34 Bilge Keel
Deacons Boatyard, Hampshire, United Kingdom
Deacons Boatyard, Hampshire, United Kingdom
Plymouth, Devon, United Kingdom