An absolute beauty with new awlgrip, new barrier coated bottom, newer Yanmar Diesel, refurbished interior, solid hand laid fiberglass hull, newer electronics and sails! Refurbished by her marine professional owner and is available due to recent change in the owners plans. A fast fin keeled cruiser/ racer with tiller steering, sturdy construction and timeless lines.
The Contessa 35 was ahead of her time when designed by Doug Peterson and she is still competitive today. She lacks nothing and is a must see beauty. Please view the photos. She is available with the option of a slip at an upscale Rhode Island marina.....there is no sales tax on boats in RI.
Detailed Specifications Follow:
Builder: Jeremy Rogers Yachts – Lymington, England
Designer: Doug Peterson
Keel: Fin
Rudder: Spade
Dimensions
LOA: 35 ft 6 in
Beam: 11 ft 6 in
Maximum Draft: 7 ft 2 in – modified with 6” lead keel shoe
Engine
Engine Brand: Yanmar 3JH3E
Engine(s) Total Power: 40 HP
Engine Type: Inboard
Tanks
Fresh Water Tanks: 56 gal in two tanks
Fuel Tanks:46 gal in two tanks
Accommodations
Number of single berths: 7
Number of cabins: 2
Number of heads: 1
Description
ANDARA, has undergone an extensive structural and cosmetic refit under her current owner of 11 years. The interior was stripped down to the longitudinal stringers and rebuilt with new bulkheads, furniture, water and electrical systems and electronics. A large portion of the cabinhouse and deck was re-cored at the same time. In short, this vessel is one of the most modern and structurally sound Contessa 35’s to be found today. In addition, the hull was stripped below the waterline and barrier coated in 2010 and the topsides refinished with Dupont Imron finish at the same time. This is a beautiful boat to behold and one that can take her new owner around the world or around the buoys with equal ease.
Hull
- Solid fiberglass hull using polyester resin
- Bottom treated with epoxy primer (2010) and coated with Epaint EP2000 hard white bottom paint
- Structural bulkheads are marine grade, waterproof plywood. All high-gloss varnish.
- Beaujolais Dupont Imron topside paint (2010) with clear coat
- Gold Awlgrip Cove Stripe (2010) and Oyster White Dupont Imron Boot Stripes (2010)
- Fin keel with 6” additional lead shoe at base. Keel bolts re-tourqued to design specs in 2002
- Spade rudder new in 1998 with aluminum stock, and aluminum rudder cap (replaced in 2005)
- Tiller steering
- Bronze through hulls
Deck
- Deck cored with end-grain balsa wood and closed cell foam
- Inward flange hull to deck joint through-bolted.
- New teak toe rail in 2003.
- Single cockpit
- Stainless steel stem head fitting with single anchor housing
- Stainless steel bow rail
- Stainless steel stern rail
- Stainless steel stanchions
- Large port side cockpit locker
- 2 x Lewmar deck hatches for ventilation – glass replaced in 2005
- Port and Starboard fixed cabin house windows replaced in 2003
- Lexan cabin house window offshore shutters
- Genoa tracks
- Harken Mainsheet track
- Tiller with extension and cover and Emergency Tiller
- Wood and Lexan hatch slides; emergency hatch slide
- Frame for dodger
- WINCHES
- 2 x Lewmar 46, 2 speed, self tailing, primaries in cockpit
- 2 x Lewmar 44, 2 speed, self tailing, secondaries in cockpit
- 9 secondary winches mounted on cabin top
- Five winch handles
Interior
GENERAL ARRANGEMENT
Sleeps a total of 7. One in Quarter Berth, 4 in the Main Salon and 2 in forecastle pipe-berths. One Lavac head. Interior furniture is either solid teak, teak laminates or veneered teak over marine ply with varnish finish. Teak and holly cabin sole new in 2003. Removable vinyl covered overhead panels. Blue upholstery in the saloon.
FORECASTLE
Open forecastle for sail and gear stowage with 2 pipe berths. Anchor locker at bow.
Located aft of the forecastle on the port side is the head. Single fiberglass unit with Lavac manual head. Pressure hot and cold water with Telephone type shower. Mirror and gear/toiletries shelves.
Across from forward head are two hanging lockers with drainage for wet gear, two large equipment drawers and an equipment locker.
MAIN SALOON
Located aft of the forward cabin and head. "L" shaped settee to port with pilot berth outboard. Straight settee to starboard with pilot berth outboard. Fixed table on the centerline with leaves port and starboard.
NAVIGATION STATION
Located aft of the saloon on the starboard side. Forward facing.
GALLEY
Located opposite the navigation station and aft of the main saloon. "U" shaped. White corian counter tops. One stainless steel sink near the centerline. 12 Single Ice Chest. Origo 2 burner non-pressurized alcohol stove with oven. Drawers and lockers.
QUARTER BERTH
Located aft of the navigation station on the starboard side.
ENGINE SPACE
Located under the cockpit. Additional access from aft and cockpit locker.
Engine and Hydraulics
- Yanmar 3JH3E, 40hp, naturally aspirated, 3x cylinder diesel (new 2002)
- Fresh water cooled via heat exchanger
- 350 hours – oil changed every 50 hours; professionally maintained
- Kanzaki Tuff-Torque transmission model KM3P4 (2.61:1)
- 2 x 1/8” aluminum (23 Gallons each) located under main saloon settees
- Engine Spares (filters, belts, etc.)
- Racor primary filter
- 17” (63mm) 3-blade Max-Prop propeller (2001)
- Yanmar engine panel includes; RPM, oil pressure, temperature and coolant alarms
- Morse control cables
Plumbing and Ventilation
- 2 x 14 gauge stainless steel T316 water tanks (28 gallons each) located under main saloon settees
- 6 gallon water heater. Water heated via engine heat exchanger or 110volt
- 1x 5 gallon plastic, black water tank
- 1x Espar D5LC 12-volt diesel cabin heater
- 1x Shurflo 2088-414-934, 45psi, 12-volt fresh water pressure pump with expansion tank
- 1x electric 1,250 GPM bilge pump, with automatic float-switch
- 1x Whale Gusher 10 MK3 manual bilge pump located in the cockpit
- 1x Lavac manual head with raw water flush
- 1x Henderson Mk V black water pump
- 1x Whale Galley Gusher Mk III fresh water foot pump at galley
- 1x Whale Galley Gusher Mk III fresh water foot pump in head
- 1x Whale Gusher Urchin manual diaphragm pump for head sink and shower sump
Electrical
- Newmar AC/DC Electrical panel located at the navigation station (new 2002) with volt- and amp-meters
- 12 volt DC system (new 2002)
- 2 x 12 volt Lifeline Group 31 AGM batteries
- Guest battery selector switch
- 1 x 55 amp Hitachi alternator
- 100 amp Ample Power AC battery charger
- 110 volt system (new 2002)
- In-line Galvanic Isolator
- 12 volt navigation lights, steaming light, deck lights, spreader lights and anchor lights (new 2002)
- 12 volt interior lights (NEW 2002)
Electronics
- Raytheon sailing instruments include (2003);
- Raytheon ST60 depth instrument in cockpit
- Raytheon ST60 boat speed instrument in cockpit
- Raytheon ST60 wind instruments in cockpit
- 2x Raytheon ST60 multi-function displays in cockpit
- Other instruments include:
- Icom IC-M59 VHF – masthead antenna
- Standard Horizon Spectrum VHF with remote access microphone – antenna on stern rail
- ICOM M710RT SSB Radiotelephone
- SCS PTC-II DSP Multimode Pactor Modem Controller
- USB Connection to navigation instruments
- Kenwood KDC3025-MRCC AM/FM stereo/CD Player (Satellite Radio Capable) with 4 speakers inside and in cockpit
- 2x Ritchie 4” bulkhead compasses in cockpit
Rig
- Aluminum, single spreader, keel stepped mast painted white (rig removed annually when vessel hauled)
- Stainless steel Navtec rod rigging
- 8mm Dyform wire backstay with insulators (2003)
- Custom removable baby stay and running backstays (2003)
- Sailtec hydraulic Backstay Adjuster (2003)
- Manual boom vang
- Halyards replaced in 2004
- Custom Aluminum replacement boom
- Aluminum spinnaker pole (2011)
- Harken headsail roller furling
- SAILS
- North NSP390 8.6 oz Dacron, full batten, loose foot offshore mainsail with Battslide Car system and two reef points (new 2003)
- Hathaway, Rieser and Raymond 150% Kevlar Genoa
- HRR offshore, 130%, roller furling Pentex Genoa
- HRR 100% Kevlar Genoa
- HRR 1.5z Dacron Spinnaker
- HRR 0.75 oz Dacron Spinnaker
- Hood storm staysail
- Sheets, blocks, blocks and misc running rigging
Equipment
- 40 kg Bruce Anchor (new)
- 20lb Danforth Anchor
- Oversized Fortress Anchor
- 1 x Horseshoe life ring
- 1 x Lifesling
- Emergency pull-down boarding ladder
- Numerous spare parts
- Lee Cloths for all bunks
- Lifeline Weather Cloths
- Sailcover
- Companionway Dodger (2004)
- Board-mounted Edson manual bilge pump
- Wind scoop
- Burgee Stick
- 4x Fenders with maroon covers (2011)
- 4x spare fenders
- Docklines
- 3 x dry powder fire extinguishers
- Cable cutters
- Wooden through hull plugs
- Nylon anchor rode
- Complete set of crockery and cutlery